CYP CSDI-42 Bedienungsanleitung

CSDI-42

3G-SDI 4 by 2 Switcher

Splitter

Operation Manual

CSDI-42

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes

no commitment to update or to keep current the information

contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁle, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

Version 1.0 March 2011

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

ﬁre, electrical shock and injury to persons.

 To prevent ﬁre or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide

ventilation.

Revision History

Version No Date Summary of Change

VR0 20110310 Preliminary Release

Table of Contents

1. Introduction ……………………..……………………...…........….…….

2. Applications …………………..………………….……...................…..

3. Package Contents ………………………...........……….................…

4. System Requirements ……………..……….........………............…….

5. Features …………………………………………......……........…...……

6. Specications ………………………………...……..........………....….

7. Operation Controls and Functions ……………...……..............……

7.1 Front Panel ..............................................................................

7.2 Rear Panel .…………………………………..…….......…...….…

8. RS-232 Protocols .......................…......……......…..........…..…....…...

8.1 Pin Assignment ..................…......………..……..........…..…....….

8.2 Commands .........…..…........................................................…...

9. Remote Control ................................................................................

10. Connection and Installation ….………………….........…..…..…......

11. Acronyms …......................................................................................

1. Introduction

The 3G-SDI 4 by 2 Switcher Splitter allows SD-SDI, HD-SDI and 3G-SDI signals to

be shown on SDI display while ensuring high bit rates of 2.970 Gbit/s to give

you fast signal transmission without signal loss. For professionals this means

that it is now easier to switch four 3G-SDI signals and split it up to two SDI

signal outputs.

2. Applications



Video broadcasting display



Professional video program display



Film studios program monitoring



Video program switching display

3. Package Contents



3G-SDI 4 by 2 Switcher Splitter



Remote Control (CR-23)



5V/2.6A DC power adaptor



Operation Manual

4. System Requirements

Input connects with SDI sources and output connects with SDI displays, all

input/output with SDI cables.

5. Features



Four 3G-SDI input sources can selected as the source and split to two

3G-SDI displays simultaneously



Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s

and 270Mb/s



Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M,

SMPTE 259M-C



Provides the Equalized and re-clocked transmission



Control by RS-232, IR Remote and on panel buttons



Supports signal input and output distance of up to 300M for SD signals,

200M for HD signals and 100M for 3G signals.

Note: Cable tested with Belden 1694A. Operating distances may vary if

used with another type of cable.

6. Specications

SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C

SDI Transmit ion Rates 2.970 Gbit/s and 2.970/1.001 Gbit/s

Input/Output Ports 4/2 BNC (SD-SDI/HD-SDI/3G-SDI)

Support Timing SD-SDI: 480i / 576i

HD-SDI: 720p@50/60, 1080i@50/60, 1080p@24/25

3G-SDI: 1080p@50/60

Power Supply 5V DC/ 2.6A (US/EU standards, CE/FCC/UL certiﬁed)

ESD Protection Human body model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)

SDI Cable Distance 3G-SDI up to 100M (BELDEN 1694A)

HD-SDI up to 200M (BELDEN 1694A)

SD-SDI up to 300M (BELDEN 1694A)

Dimension (mm) 200 (W) x 138 (D) x 30 (H)

Weight (g) 900

Chassis Material Metal

Silkscreen Color Black

Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F

Relative Humidity 20 ~ 90% RH (Non-condensing)

Power Consumption (W) 5W

7. Operation Controls and Functions

7.1 Front Panel

INPUT

SDI OUTPUT

POWER

3G SDI 4x2 Switcher / SplitterCSDI-42

① ② ③ ④

① Power LED: This green LED will illuminate when the device is connected

with power supply.

② IR receiver: This IR window receives IR signal from the remote control

included in the package.

③ 3G-SDI Input select/Indicator 1~4: Press the input button sequentially to

switch to your desired SDI input source, the LED will illuminate to indicate

which input source is selected.

④ SDI OUTPUT: These slots are to connect to the SDI displays with an SDI

cables for displaying images. Or it can be connect with another SDI

converter/extender to extend the signal.

7.2 Rear Panel

12 3 4

SDI INPUT

RS-232

DC 5V

① ② ③

① SDI INPUT: These slots are to connect to the SDI source equipments such

as video camcorder or SDI player.

② RS-232: Connect with D-Sub 9pin cable from the PC/NB for RS-232 control.

③ DC 5V: Plug the 5V DC power supply into the unit and connect the

adaptor to AC wall outlet. Green LED will illuminate when the power is

connected.

8. RS-232 Protocols

8.1 Pin Assignment

Pins deﬁnition of modem cable

Remote Controller

PIN Deﬁnition PIN Deﬁnition

1 NC 1 NC

2 TxD 2 RxD

3 RxD 3 TxD

4 NC 4 NC

5 GND 5 GND

6 NC 6 NC

7 NC 7 NC

8 NC 8 NC

9 NC 9 NC

Baud Rate: 19200bps

Data bit: 8 bits

Parity: None

Stop bit: 1 bit

8.2 Commands

Command Action

pc Enter into /exit PC Command

power00 Power OFF

power01 Power ON

input01 Input selction 1

input02 Input selection 2

input03 Input selection3

input04 Input selection4

9. Remote Control

① Power: Press the button to turn on/off the

unit.

② Direct input selector: Press 1, 2, 3 or 4 to

select the desired input source.

①

②

10. Connection and Installation

SDI Monitor

HDMI TV/Monitor

SDI Monitor

CLUX-SDI2HC

Camcorder

Andere Handbücher für CSDI-42

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CLUX-4M Bedienungsanleitung

CYP

CYP CLUX-2 Bedienungsanleitung

CYP

CYP CLUX-12E Bedienungsanleitung

CYP

CYP CPRO-2A Bedienungsanleitung

CYP

CYP CLUX-4EN Bedienungsanleitung

CYP

CYP CDPS-4KQ Bedienungsanleitung

CYP

CYP CHDBT-1H4CPLV Bedienungsanleitung

CYP

CYP qu-2-4k22 Bedienungsanleitung

CYP

CYP CPLUS-V4E Bedienungsanleitung

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP CHDBT-1H1CE Bedienungsanleitung

CYP

CYP CDPS-UA1H4HS Bedienungsanleitung

CYP

CYP CLUX-18E Bedienungsanleitung

CYP

CYP HDBT CHDBT-1H7CL Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CLUX-8M Bedienungsanleitung

CYP

CYP CDVI-4H Bedienungsanleitung

CYP

CYP CSDI-14 Bedienungsanleitung

CYP

CYP CPRO-2E Bedienungsanleitung

CYP

CYP DCT-28 Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CPLUS-V8E Bedienungsanleitung

CYP

CYP Clux-8 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung