CYP CSDI-14 Bedienungsanleitung

CSDI-14

3G-SDI 1 by 4 Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 08/04/11 Preliminary Release

VS1 11/07/12 Updated format/diagrams/SDI

standards

VS2 13/07/12 First release

VR3 09/08/12 Type Error

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 1

6. Operation Controls and Functions....... 2

6.1 Front Panel ........................................2

6.2 Rear Panel.........................................2

7. Connection Diagram ............................ 3

8. Specications ........................................ 4

9. Acronyms ............................................... 5

1. INTRODUCTION

The 3G-SDI 1 by 4 Splitter allows SD-SDI, HD-SDI and 3G-SDI signals to

be split from a single SDI source to up four simultaneous SDI outputs

while ensuring high bit rates of 2.970 Gbit/s to give you high bandwidth

signal transmission without signal loss over long distances.

2. APPLICATIONS

• Video broadcasting display

• Professional video program display

• Film studios program monitoring

• Video program switching display

3. PACKAGE CONTENTS

• 3G-SDI 1 by 4 Splitter

• 5 V/2.6 A DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

SDI source input (such as broadcast video cameras or recording

device) and SDI output displays (such as TVs or monitors)

5. FEATURES

• Split one 3G-SDI input source to four 3G-SDI displays simultaneously

• Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s

and 270Mb/s

• Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE

292M, SMPTE 259M-C

• Provides equalized and re-clocked transmission

• Supports signal input and output distances of up to 300 m for SD

signals, 200 m for HD signals and 100 m for 3G signals.

Note: Tested with Belden 1694A Cable. Operating distances may vary

 ifusedwithcablesofdifferentspecications.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER SDI OUTPUT

CSDI-14 3G SDI 1x4 Splitter

1 2

Power LED

The LED will illuminate green when the device is connected to a

power supply.

SDI OUTPUT

Connect to up to four SDI TVs or monitors for simultaneous display

or to another splitter to cascade the SDI signal to multiple displays

or devices.

6.2 Rear Panel

DC 5V

SDI INPUT

1 2

SDI INPUT

Connect to the SDI output of the SDI source device such as a

video camcorder or SDI player. Accepts SD,HD or 3G SDI signals.

DC 5V

Plug the 5 V DC power supply into the unit and connect the

adaptor to an AC outlet. The 'POWER' LED will illuminate green

when the power is ON.

7. CONNECTION DIAGRAM

DC 5V

SDI INPUT

POWER SDI OUTPUT

CSDI-14 3G SDI 1x4 Splitter

DC 5V

SDI INPUT

Power Video

Lock

Audio

Lock

HDMI/

DVI

Audio Out

3G HD SD

3GSDI to HDMI CLUX-SDI2HC

HDMI Out

SDI Camera

SDI input

Power Supply

SDI Outputs

HDMI

Output

HDMI Display SDI Display

Cascade to another 4 SDI Displays

SDI Display

SDI to

HDMI

Converter

1×4

SDI

Splitter

8. SPECIFICATIONS

SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C

SDI Transmission

Rates

2.970 Gbit/s and 2.970/1.001 Gbit/s

Input 1×BNC (SD/HD/3G-SDI)

Output 4×BNC (SD/HD/3G-SDI)

SDI Timing Support SD-SDI:

SMPTE 259M-C, 270 Mbit/s

HD-SDI:

SMPTE 292M, 1.485 & 1.485/1.001 Gbit/s

3G-SDI:

SMPTE 424M/425M-AB, 2.970 &

2.970/1.001 Gbit/s

Power Supply 5 V DC/ 2.6 A (US/EU standards, CE/FCC/UL

certied)

ESD Protection Human body model:

±8 kV (air-gap discharge)

±4 kV (contact discharge)

SDI Cable Distance 3G-SDI up to 100 m (BELDEN 1694A)

HD-SDI up to 200 m (BELDEN 1694A)

SD-SDI up to 300 m (BELDEN 1694A)

Dimensions 200 mm (W)×138 mm(D) x 30 mm (H)

Weight 900 g

Chassis Material Metal

Silkscreen Color Black

Operating

Temperature

0 ˚C~40 ˚C/32 ˚F~104 ˚F

Storage

Temperature

−20 ˚C~60 ˚C/−4 ˚F~140 ˚F

Relative Humidity 20~90 % RH (Non-condensing)

Power Consumption 5 W

9. ACRONYMS

ACRONYM COMPLETE TERM

3G Bandwidth 2.97Gbps ≈3G

HDMI High Denition Multimedia Interface

SDI Serial Digital Interface

Andere Handbücher für CSDI-14

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CLUX-1H8CAT Bedienungsanleitung

CYP

CYP CLUX-12CEC Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CPRO-2E Bedienungsanleitung

CYP

CYP CPLUS-V2E Bedienungsanleitung

CYP

CYP DT-12 Bedienungsanleitung

CYP

CYP CLUX-18E Bedienungsanleitung

CYP

CYP DT-12 Bedienungsanleitung

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CLUX-12E Bedienungsanleitung

CYP

CYP CPRO-2E Bedienungsanleitung

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

CYP

CYP CMDP-13MDPI Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP CSDI-42 Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CPLUS-V8E Bedienungsanleitung

CYP

CYP CHDBT-1H1CE Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP QU-4-4K22 Bedienungsanleitung

CYP

CYP CLUX-18EU Bedienungsanleitung

CYP

CYP CDVI-4H Bedienungsanleitung

CYP

CYP CLUX-8M Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung