Danfoss BasicPlus2 WT-T Bedienungsanleitung

Installation Guide

BasicPlus2WT-T

Room thermostat

VICUL202 Danfoss Heating Solutions

Installation Guide BasicPlus2WT-T Room Thermostat

1. Installation Steps

1. Installation must be done by an authorised

electrician.

2. The room thermostat should be installed at approx.

1.5 m above oor and where the eects of sunlight,

draught or other heat sources (eg. TV’s) are avoided,

see g. 1.

3. First of all, carefully remove the cover and dial knob,

see g. 2.

4. Connect the wire before mounting the back plate to

the wallbox using the enclosed screws. Then mount

the cover to the back plate, see g. 3.

2. Wiring

See g. 4 for dimensions and g. 5 for wiring diagram.

WT-T is often used with a Danfoss TWA actuator.

Depending on the conditions of power location and

actuator type (NC or NO), the wiring between room

thermostat and actuator is dierent.

Follow the illustrations to complete the wiring.

1. When power supply location is close to room

thermostat:

• Connect to actuator TWA 230 V NC type, see g. 6.

• Connect to actuator TWA 230 V NO type, see g. 7.

2. When power supply location is close to actuator:

• Connect to actuator TWA 230 V NC type, see g. 8.

• Connect to actuator TWA 230 V NO type, see g. 9.

Danfoss Heating Solutions VICUL202

Installation Guide BasicPlus2WT-T Room Thermostat

3. Notes

1. Correct wiring is essential; using instrument to con-

rm L and N before wiring is recommended.

2. Don’t remove too much of the insulation cover from

the wire to avoid short circuit caused by the naked

wire touching the metal 86 size mounting wall box.

3. Don’t let the screw press or touch the wire when

using screws to x room thermostat in wall box. A

short-circuit risk exists if the wire insulation cover is

damaged by the screw, and if the naked wire con-

nects with the screw.

4. If walls must be painted, mount the room thermo-

stat after painting, to avoid dust or paint material

penetrating the room thermostat and thus damag-

ing the PCB.

5. The max. load of relay is 3 A (resistive) or 1 A (induc-

tive, such as pump or motor). The relay will be dam-

aged if the load exceeds the limit.

6. Don’t cover the thermostat, for instance by hanging

towels directly in front of it.

7. The room thermostat should be connected to the

corresponding loop actuator in individual room

temperature control.

VICUL202 Danfoss Heating Solutions

Installation Guide BasicPlus2WT-T Room Thermostat

4. Technical Specications

Feature Description

Approval CE Marking, EN60730

Ambient temperature -10 - 60° C

IP Class 30

Max. load, inductive <1 A

Max. load, resistive <3 A

Power consumption 7 W

Power supply 230 Vac ±10%, 50/60 Hz

Room temp. set range 5 - 30° C

Shell material ABS + PC

Danfoss Heating Solutions VICUL202

Installation Guide BasicPlus2WT-T illustrations

Fig. 1

1.5 m

Fig. 2

Fig. 3

VICUL202 Danfoss Heating Solutions

Installation Guide BasicPlus2WT-T illustrations

Fig. 4

Fig. 5

230 V

Fig. 6

NC NO L N

230 V

TWA

230V

WT-T

Danfoss Heating Solutions VICUL202

Installation Guide BasicPlus2WT-T illustrations

Fig. 7

NC NO L N

230 V

TWA

230V

WT-T

Fig. 8

NC NO L N

230

V ~

TWA

230V

WT-T

Fig. 9

NC NO L N

230

V ~

TWA

230V

WT-T

Danfoss A/S

Floor Heating Hydronics

Ulvehavevej 61

DK-7100 Vejle

Denmark

Phone...+45 7488 8500

Fax ......+45 7488 8501

E-mail ...heating.solutions@danfoss.com

www.heating.danfoss.com

VICUL202 Produced by Danfoss Floor Heating Hydronics 03/2015

Danfoss can accept no responsibility for possible errors in catalogues, brochures and

other printed material. Danfoss reserves the right to alter its products without notice.

This also applies to products already on order provided that such alterations can be

made without subsequential changes being necessary in specications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and

Inhaltsverzeichnis

Andere Danfoss Thermostat Handbücher

Danfoss

Danfoss TS715 Si Montageanleitung

Danfoss

Danfoss REPI Series Bedienungsanleitung

Danfoss

Danfoss TP9 Bedienungsanleitung

Danfoss

Danfoss TP4 Betriebsanleitung

Danfoss

Danfoss HC8000 Series Bedienungsanleitung

Danfoss

Danfoss CF-RP 088U0211 Bedienungsanleitung

Danfoss

Danfoss DEVIreg 532 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 110 Bedienungsanleitung

Danfoss

Danfoss 088L5133 Bedienungsanleitung

Danfoss

Danfoss FH-CWD Bedienungsanleitung

Danfoss

Danfoss MBC 8000 Bedienungsanleitung

Danfoss

Danfoss living connect Bedienungsanleitung

Danfoss

Danfoss TPONE-RF Bedienungsanleitung

Danfoss

Danfoss HC75A-1 Betriebsanleitung

Danfoss

Danfoss DEVIreg Touch Bedienungsanleitung

Danfoss

Danfoss TP4000 Range Bedienungsanleitung

Danfoss

Danfoss RET2000 B Bedienungsanleitung

Danfoss

Danfoss GET B-RF Leitfaden

Danfoss

Danfoss 140F1143 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss TP7000 Series Bedienungsanleitung

Danfoss

Danfoss Icon Master Bedienungsanleitung

Danfoss

Danfoss DEVI DEVIreg Opti Bedienungsanleitung

Danfoss

Danfoss RET2000B-RF Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung