Danfoss Icon Master Bedienungsanleitung

VUMBB102 © Danfoss | FHH | 2016.09 | 1

User Guide

Danfoss Icon™Display

Room Thermostat, 230 V

Danfoss Icon™ Display is a room thermostat especially designed for ﬂoor heating systems. It comes in

four diﬀerent designs to suit markets worldwide.

Danfoss Icon™ Display is very intuitive and easy to use. Just set your desired comfort temperature, and

the thermostat will control the room temperature in accordance with your setting.

Introduction

Wake up

the thermostat

Touch the screen to wake up Danfoss Icon™ Display.

The actual room temperature is displayed. The Heating icon is dis-

played, if the thermostat has turned on the heat.

Touch to return to the previous screen.

The screen turns oﬀ after 10 seconds without any action.

Set the temperature Wake up the thermostat

Touch or to set the desired room temperature.

The temperature ﬂashes to indicate setting is in progress.

Conﬁrm your setting by touching .

Reset to default

factory settings

Press and simultaneously for at least 3 seconds to reset Danfoss Icon™ Display to the default

factory settings.

The display toggles between and .

Conﬁrm by touching .

2 | © Danfoss | FHH | 2016.09 VUMBB102

Danfoss A/S

Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501

heating@danfoss.com • www.ﬂoorheating.danfoss.com

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alterations can be made without subsequential changes being necessary in speciﬁcations already agreed.

Wake up the thermostat.

Press for 3 seconds to open the User menus and .

Toggle the menus with or .

Choose menu with .

(To open the Installer menus and , press again for 3 seconds).

Temperature limitation

and toggles with the temperature on the screen. Set highest temperature with or .

and toggles with the temperature on the screen. Set lowest temperature with or .

Conﬁrm your choice with .

Default temperature range: 5 to 35° C.

Product ID

Production code.

Menu 3 and 4 are only relevant for the installer

Set actuator type

Choose between Normally Closed or Normally Open with or .

Conﬁrm with .

Set heat emission characteristics of the ﬂoor

Choose Fast , Medium or Slow heat emission characteristics with or .

Conﬁrm with .

Menus

Andere Handbücher für Icon Master

Inhaltsverzeichnis

Andere Danfoss Thermostat Handbücher

Danfoss

Danfoss TP5000-RF Betriebsanleitung

Danfoss

Danfoss DEVI DEVIreg 532 Bedienungsanleitung

Danfoss

Danfoss RET2000 M Bedienungsanleitung

Danfoss

Danfoss 140F1080 Bedienungsanleitung

Danfoss

Danfoss HP75-1 Bedienungsanleitung

Danfoss

Danfoss living connect Z Bedienungsanleitung

Danfoss

Danfoss TPONE-RF Bedienungsanleitung

Danfoss

Danfoss FH-CWT Bedienungsanleitung

Danfoss

Danfoss TP5000 RF Si Leitfaden

Danfoss

Danfoss FMT230D Betriebsanleitung

Danfoss

Danfoss HC6000 Bedienungsanleitung

Danfoss

Danfoss Icon Master Bedienungsanleitung

Danfoss

Danfoss ECtemp 330 Bedienungsanleitung

Danfoss

Danfoss living connect Bedienungsanleitung

Danfoss

Danfoss Icon Master Controller 24 V Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 310, A376 Bedienungsanleitung

Danfoss

Danfoss RET B Betriebsanleitung

Danfoss

Danfoss RAS-D2 Combi Bedienungsanleitung

Danfoss

Danfoss TP9000 Leitfaden

Danfoss

Danfoss REP24CO Bedienungsanleitung

Danfoss

Danfoss TP9 Bedienungsanleitung

Danfoss

Danfoss HC75-1 Betriebsanleitung

Danfoss

Danfoss DEVI DEVIreg 530 Bedienungsanleitung

Danfoss

Danfoss FH-CWP Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung