Datalogic Magellan 9800i Bedienungsanleitung

MagellanTM 9800i

Scanner and Scanner-Scale with Imaging Technology

Quick Reference Guide

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

described therein may be reproduced or transmitted in any form or by any means without prior written permission

of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products

are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the pur-

chaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including

the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic

representative. Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com)

or provided on appropriate media. If you visit our website and would like to make comments or suggestions about

this or other Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate,

however, Datalogic reserves the right to change any specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the

U.S.A. and the E.U. All other brand and product names may be trademarks of their respective owners.

Magellan is a registered trademark of Datalogic ADC, Inc. in many countries, including the U.S.A. and All-Weighs,

FirstStrike, SmartSentry and SurroundScan are registered trademarks of Datalogic ADC, Inc. in the U.S.A. Ome-

gaTek, Produce Rail, Productivity Index Reporting, and ScaleSentry are all trademarks of Datalogic ADC, Inc.

Patents

See www.patents.datalogic.com for patent list.

See the Regulatory Addendum included with your product

for additional regulatory, safety and legal information.

Table of Contents

Introduction .............................................................................................................................. 1

Operation .................................................................................................................................. 1

Certification Label .............................................................................................................. 2

Scanning Items ......................................................................................................................... 3

Scan Motion ....................................................................................................................... 4

Cleaning ..................................................................................................................................... 5

Weighing Items Using the All-Weighs® Platter

(Scale Models) ........................................................................................................................... 6

Scale Sentry™ Option ................................................................................................................ 6

Top Down Reader (TDR) Option ............................................................................................... 7

Electronic Article Survellance (EAS) Deactivation Options .................................................. 8

Sensormatic Coupled Mode ....................................................................................... 8

Sensormatic Decoupled Mode................................................................................... 8

Controls and Indicators ........................................................................................................... 8

LED and Beeper Indications .................................................................................................. 10

Error Codes ....................................................................................................................... 11

Label Programming Mode Indications .......................................................................... 11

Sensormatic® EAS Indications ....................................................................................... 11

NOTES

Quick Reference Guide 1

Magellan 9800i

Introduction

The MagellanTM 9800i is a multi-plane imaging bar code scanner with an optional integrated

scale, designed to serve in supermarket peripheral lanes. This manual describes its basic

operation. For more detailed information about setup, installation and programming, see

the Product Reference Guide for this product. These manuals are provided in Portable Docu-

ment Format (PDF) for viewing and printing from the website listed on the back cover of this

manual. Additionally, printed manuals can be ordered from your dealer/distributor.

Operation

CAUTION

If applicable, apply power to the EAS Controller box before pow-

ering on the scanner.

2Magellan

TM 9800i

Certification Label

At the time the local scale regulatory authority certifies the scanner/scale for use, a certifi-

cation label is affixed to the unit. Depending upon the size and shape of the label, placement

can be made in one of the locations shown.

Figure 1. Affixing the Scale Certification Label

Left end of Scanner Bonnet

Right end of

Scanner Bonnet

Back of Remote

Display Head

Remote

Display Post

Atop the Bonnet underneath the Platter

Quick Reference Guide 3

Scanning Items

Slide or push items through the SurroundScanTM scan zone in a right-to-left or left-to-right

movement. The scanner is equally efficient at scanning items in either direction. It is unnec-

essary to shift the position of the bar code, as the scanner can “read” it from the bottom,

top, left, right, front and back side of an item, as long as it is fully within the scan zone.

Figure 2. Scan Zones

For best scanning results...

• Keep items in their natural orientation. Don’t favor any of the scan windows.

• Push or slide items instead of lifting them. Avoid unnecessary hand and wrist

movements such as rotation, gripping or twisting, as this can cause repetitive

motion injuries. This helpful technique can also allay the possibility of lifting thou-

sands of pounds per day

NOTE

If a POS terminal holds the scanner in a disabled state,

the scanner enters limited scanning mode which

allows reading of programming labels but ‘chirps’

other labels.

Scan Zone for Main Scanner

Optional Top Down

Reader (TDR) Scan

Zone

Slide items over the center of the

horizontal window for best scan

coverage

4Magellan

TM 9800i

Scan Motion

The SurroundScan™ scan pattern and advanced FirstStrike™ decoding software ensures the

scanner will read most hard-to-read codes quickly and without a need to particularly reori-

ent items.

It is important to verify that the platter has been installed flush with the countertop to

enhance slide-through scanning (see Figure 1). If the platter is not flush with the counter,

contact the installer or your technical support team for assistance.

Figure 3. Verify Flush Installation

Scanner Mounted Flush — Correct

Scanner Mounted

Above Flush — Incorrect

Scanner Mounted

Below Flush — Incorrect

Quick Reference Guide 5

Cleaning

Exterior surfaces and scan windows exposed to spills, smudges or debris accumulation

require periodic cleaning to assure best performance during scanning and weighing opera-

tions. Use a clean, lint-free cloth or paper towel dampened with a nonabrasive, mild, water-

based window cleaner to wipe away stains, smudges, fingerprints, spills, etc. from the scan

window and exterior surfaces.

Figure 4. Cleaning the Scanner

Daily, clean the debris chutes between the platter and the outer housing. Most items can be

cleared from the debris chutes by carefully running a thin, stiff object like a credit card along

all sides of the weighing surface. If necessary, remove the platter to clean the debris chutes

and drip rail.

CAUTION

DO NOT use abrasive cleaning agents or abrasive pads

to clean this product. Harsh chemicals, disinfectants,

and cleansers can cause damage which will adversely

affect scanning and weighing performance.

(Models vary)

CAUTION

DO NOT spray

cleaners directly

on the scanner!

6Magellan

TM 9800i

Weighing Items Using the All-Weighs® Platter

(Scale Models)

Items to be weighed can be placed anywhere on the L-shaped All-Weighs® platter (weigh

platter) surface. The unique platter design allows you to place items anywhere on its sur-

face. Oversized items can even be accurately weighed while leaned against the center of its

vertical section.

In addition, the Produce RailTM allows items to rest above the counter and other non-weigh-

ing surfaces. Once weighed items have been positioned, enter PLU (Price Look-Up) data as

described in your POS system instructions. Item weight is displayed on the Remote Display

and/or the host display.

Figure 5. Weighing Items

Scale Sentry™ Option

The optional ScaleSentry feature monitors items placed on the platter to detect and indicate

if they are overhanging non-weighing surfaces. If the system’s infrared (IR) beams sense

items encroaching past the sides of the weigh platter, the speaker will sound a unique tone

and/or the ScaleSentry LED indicator will illuminate to indicate a ScaleSentry error condi-

tion. A scale transaction cannot be completed until the item(s) are repositioned to rest fully

on the platter (move them towards the center), clearing the condition. Reference the PRG for

more ScaleSentry options and details.

Andere Handbücher für Magellan 9800i

Inhaltsverzeichnis

Andere Datalogic Scanner Handbücher

Datalogic

Datalogic Heron D140 Bedienungsanleitung

Datalogic

Datalogic Matrix 450 Bedienungsanleitung

Datalogic

Datalogic MAGELLAN 3510HSi Bedienungsanleitung

Datalogic

Datalogic Gryphon I GPS4400 Bedienungsanleitung

Datalogic

Datalogic Magellan 1100i Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Datalogic

Datalogic HS7500 Bedienungsanleitung

Datalogic

Datalogic AREX Bedienungsanleitung

Datalogic

Datalogic MAGELLAN 3410VSi Kurzanleitung zur Einrichtung

Datalogic

Datalogic TC1100 Bedienungsanleitung

Datalogic

Datalogic DS1100 SH2347 Bedienungsanleitung

Datalogic

Datalogic MAGELLAN 3200VSI Installations- und Betriebshandbuch

Datalogic

Datalogic DS2100N Bedienungsanleitung

Datalogic

Datalogic DS1500-1100 Bedienungsanleitung

Datalogic

Datalogic Magellan 9800i Bedienungsanleitung

Datalogic

Datalogic DS1100 SH2347 Bedienungsanleitung

Datalogic

Datalogic Magellan 1100i Bedienungsanleitung

Datalogic

Datalogic Magellan 3300HSi Installations- und Betriebshandbuch

Datalogic

Datalogic LS2200-1 Series Bedienungsanleitung

Datalogic

Datalogic Magellan CSS4400 Bedienungsanleitung

Datalogic

Datalogic Magellan 9800i Installations- und Betriebshandbuch

Datalogic

Datalogic HandScanner MR Bedienungsanleitung

Datalogic

Datalogic DS2100 Bedienungsanleitung

Datalogic

Datalogic DS1500 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung