Digital Equipment DEC 3000 700 AXP Kurzanleitung
DEC3000Model700AXP
UpgradeInformation
Order Number: EK–D37AX–UP. A01
Digital Equipment Corporation
Maynard, Massachusetts
Third Printing, July 1994
Digital Equipment Corporation makes no representations that the use of its
products in the manner described in this publication will not infringe on
existing or future patent rights, nor do the descriptions contained in this
publication imply the granting of licenses to make, use, or sell equipment or
software in accordance with the description.
Possession, use, or copying of the software described in this publication
is authorized only pursuant to a valid written license from Digital or an
authorized sublicensor.
© Digital Equipment Corporation 1993, 1994. All Rights Reserved.
The following are trademarks of Digital Equipment Corporation: Alpha AXP,
AXP, Bookreader, DEC, DECaudio, DECchip, DECconnect, DEC GKS, DEC
Open3D, DEC PHIGS, DECstation, DECsystem, DECwindows, DECwrite,
DELNI, Digital, MicroVAX, OpenVMS, RX, ThinWire, TURBOchannel, ULTRIX,
VAX, VAX DOCUMENT, VAXcluster, VAXstation, VMS, and the DIGITAL logo.
The following are third-party trademarks:
CD is a trademark of Data General Corporation.
Open Software Foundation is a trademark of Open Software Foundation, Inc.
OSF, OSF/1, and OSF/Motif are registered trademarks of Open Software
Foundation, Inc. Motif is a registered trademark of Open Software Foundtion,
Inc., licensed by Digital.
ISDN is a registered trademark of Fujitsu Network Switching of America.
Mylar is a registered trademark of E.I. DuPont de Nemours & Company, Inc.
Velcro is a registered trademark of Velcro USA, Inc.
All other trademarks and registered trademarks are the property of their
respective holders.
FCC Notice: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference, in which case users
will be required to correct the interference at their own expense.
S2621
This document was prepared using VAX DOCUMENT Version 2.1.
Contents
1 Options You Can Upgrade
Overview ................................................. 1–1
Chapter Overview ....................................... 1–1
Purpose of Manual ....................................... 1–1
Options You Can Upgrade . ................................... 1–2
Internal/External Options ................................. 1–2
External Options ........................................ 1–5
Warning ............................................... 1–8
Mounting Bracket ....................................... 1–8
What to Read Next ......................................... 1–8
Using This Manual . . . ................................... 1–8
2 Upgrading a VAXstation 4000 Model 60/90/90A
Topics Covered in This Chapter . . ........................... 2–1
Upgrade Procedure ......................................... 2–1
Step 1: If Your System Has Factory-Installed Drives . . .......... 2–1
Step 2: Shut Down System ................................ 2–3
Step 3: Disconnect Cables ................................. 2–3
Step 4: Remove System Cover . . . ........................... 2–3
Step 5: Remove H-Bracket................................. 2–4
Step 6: Remove Drives from the H-Bracket . ................... 2–5
Step 7: Remove SPXgt Graphics Module . . . ................... 2–6
Step 8: Remove Removable-Media Bracket . ................... 2–8
Step 9: Remove Drive from Bracket.......................... 2–9
Step 10: Set SCSI IDs on Drives . ........................... 2–10
Step 11: Install New Mounting Brackets . . . ................... 2–10
Note: Other Accessory Kit Brackets ......................... 2–11
Step 12: Complete the Upgrade . . ........................... 2–11
Step 13: Return Your VAXstation to Digital ................... 2–11
iii
3 Upgrading a DECstation 5000 Model 120/125/133/150
Topics Covered in This Chapter ............................. 3–1
Upgrade Procedure . ........................................ 3–1
Step 1: If Your System Has Factory-Installed Drives ............ 3–1
Step 2: Shut Down System ................................ 3–2
Step 3: Disconnect Cables . ................................ 3–2
Step 4: Remove System Cover .............................. 3–2
Step 5: Remove Front Drive Panel . . ........................ 3–4
Step 6: Remove Removable Media Drives ..................... 3–5
Step 7: Remove Fixed Disk Drives. . . ........................ 3–5
Step 8: Remove Modules . . ................................ 3–6
Step 9: Set the SCSI IDs on the Drives ....................... 3–7
Step 10: Install New Mounting Bracket ...................... 3–7
Step 11: Complete the Upgrade ............................. 3–7
Step 12: Return Your DECstation to Digital . . . ................ 3–8
4 Upgrading a DECstation 5000 Model 200/240/260
Topics Covered in This Chapter ............................. 4–1
Upgrade Procedure . ........................................ 4–2
Step 1: If Your System Has Factory-Installed Drives ............ 4–2
Step 2: Shut Down System ................................ 4–2
Step 3: Disconnect Cables . ................................ 4–3
Step 4: Remove System Cover .............................. 4–3
Step 5: Remove Option Modules ............................ 4–4
Step 6: Set the SCSI IDs on the Drives ....................... 4–5
Step 7: Complete the Upgrade .............................. 4–5
Step 8: Return Your DECstation to Digital .................... 4–5
5 Upgrading a DEC 3000 Model 400 AXP
Topics Covered in This Chapter ............................. 5–1
Upgrade Procedure . ........................................ 5–1
Step 1: Removing Options . ................................ 5–1
Mounting Brackets for Drives .............................. 5–1
Step 2: Set SCSI IDs on Drives ............................. 5–1
Step 3: Complete the Upgrade .............................. 5–2
Step 4: Return Your System to Digital ....................... 5–2
Step 5: Service Contract . . ................................ 5–2
iv
A SCSI ID Settings for Drives
Setting a Unique SCSI Address ................................ A–1
Selecting SCSI ADDRESS ................................. A–1
Changing the Setting . . ................................... A–2
Setting the Unit Select Switch . . . ........................... A–7
Remote SCSI Address Jumpers . . ........................... A–13
Figures
1–1 Upgrade Kit Contents . . . ........................... 1–7
2–1 SPXgt 24-Plane Graphics Module . . ................... 2–6
2–2 Removing the SPXgt 24-Plane Graphics Module .......... 2–7
A–1 TZK10/11 Tape Drive SCSI ID Settings ................. A–3
A–2 RRD42 Compact Disk Drive SCSI ID Settings . . .......... A–4
A–3 RRD43 Compact Disk Drive SCSI ID Settings . . .......... A–5
A–4 RX26 Diskette Drive SCSI ID Settings ................. A–6
A–5 RX26 Unit Select Switch . ........................... A–7
A–6 TZ30 SCSI Switches................................ A–8
A–7 TLZ06 Tape Drive SCSI ID Settings ................... A–9
A–8 RZ23L Fixed Disk Drive SCSI Settings ................. A–10
A–9 RZ24L/24 Fixed Disk Drive SCSI Settings ............... A–11
A–10 RZ25 Fixed Disk Drive SCSI Settings .................. A–12
A–11 RZ25 Secondary SCSI Address Port . ................... A–13
A–12 RZ25L Fixed Disk Drive SCSI Settings ................. A–14
A–13 RZ26 Fixed Disk Drive SCSI Settings .................. A–15
A–14 RZ26B Fixed Disk Drive SCSI Settings ................. A–16
A–15 RZ26L Fixed Disk Drive SCSI Settings ................. A–17
A–16 RZ28 Fixed Disk Drive SCSI Settings .................. A–18
A–17 RZ28B Fixed Disk Drive SCSI Settings ................. A–19
v
1
Options You Can Upgrade
Overview
Chapter
Overview This chapter contains the following topics:
• Options You Can Upgrade
• Upgrade kit contents
• Using the Manual
Purpose of
Manual The purpose of this guide is to tell customers and Digital
Services which options can be removed from the current system
and used, either internally or externally, in the DEC 3000 Model
700. Step-by-step instructions are provided for removing the
options.
Options You Can Upgrade 1–1
Options You Can Upgrade
Options You Can Upgrade
Internal/External
Options Options that are supported internally or externally on the DEC
3000 Model 700 are listed in the following tables:
Fixed Disk Drives Comment
RZ23L
RZ24L
RZ24
RZ25
RZ25L
RZ26
RZ26B OpenVMS support only
RZ26L
RZ28
RZ28B
Removable-Media
Drives Comment
RRD42 Including tabletop device
RRD43 Including tabletop device
TLZ06 Including tabletop device
TZK10
TZK11
RX26
TZ30
1–2 Options You Can Upgrade
Options You Can Upgrade
TURBOchannel
Options Comment
DEFTA–FA
Graphics Modules Comment
PMAGB–BA/BB
PMAGB–BC/BD
PMAGB–BE/BF
PMAGB–JA/JB OSF/1 AXP support only
PMAGB–DA/DB DEC Open3D required for software support
PMAGB–DC/DD DEC Open3D required for software support
PMAGB–EA/EB DEC Open3D required for software support
PMAGB–EC/ED DEC Open3D required for software support
PMAGB–FA/FB DEC Open3D required for software support
PMAG–DB/DA
PMAG–EA/EB
PMAG–FA/FB
PMAGC–AA
PMAGC–BA
PMAGD–AA
PMAGD–BA
PMAGD–CA
AV300–AA
PEXGA–AA OSF/1.3 AXP support and KWS 1.3 required
PEXGA–BA OSF/1.3 AXP support and KWS 1.3 required
PEXGA–CA OSF/1.3 AXP support and KWS 1.3 required
PEXGA–AB OSF/1.3 AXP support and KWS 1.3 required
PEXGA–AC OSF/1.3 AXP support and KWS 1.3 required
Options You Can Upgrade 1–3
Options You Can Upgrade
Memory Comment
MS15–BA
MS15–CA
MS15–DA
MS15–EA
MS15–FA
1–4 Options You Can Upgrade
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Digital Equipment Desktop Handbücher
Digital Equipment
Digital Equipment VAX-11/730 Installationshandbuch
Digital Equipment
Digital Equipment VAXft 810 Service-Handbuch
Digital Equipment
Digital Equipment DEC 3000 600 AXP Bedienungs- und Montageanleitung
Digital Equipment
Digital Equipment 7000 AXP System Bedienungsanleitung
Digital Equipment
Digital Equipment 600A Installations- und Betriebshandbuch
Digital Equipment
Digital Equipment VT78 Bedienungsanleitung
Digital Equipment
Digital Equipment STARION 200i Bedienungsanleitung
Digital Equipment
Digital Equipment VAX 4000 Model 300 Bedienungsanleitung
Digital Equipment
Digital Equipment DECstation 5000 Kurzanleitung
Digital Equipment
Digital Equipment DECpc AXP 150 Bedienungsanleitung
Digital Equipment
Digital Equipment Personal DECstation 5000 50 Handbuch
Digital Equipment
Digital Equipment AlphaStation 600 Series Bedienungsanleitung
Digital Equipment
Digital Equipment 900 AXP Betriebsanleitung
Digital Equipment
Digital Equipment VAX 4000 100A Service-Handbuch
Digital Equipment
Digital Equipment DECstation 2100 Handbuch
Digital Equipment
Digital Equipment DECstation 5000 Model 200 Bedienungsanleitung
Digital Equipment
Digital Equipment DECpc AXP 150 Bedienungsanleitung
Digital Equipment
Digital Equipment DECstation 212LP Bedienungsanleitung
Digital Equipment
Digital Equipment CELEBRIS Pentium PC Bedienungsanleitung
Digital Equipment
Digital Equipment DEC 3000 600 AXP Bedienungsanleitung
