dji FC7BMC Bedienungsanleitung
Motion Controller
User Manual
v1.0 2021.03
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.
3
© 2021 DJI All Rights Reserved.
Download the DJI Virtual Flight App
Scan the QR code on the right to download DJI Virtual Flight.
The iOS version of DJI Virtual Flight is compatible with iOS v11.0 and later.
Download DJI Assistant 2 (DJI FPV series)
Download DJI ASSISTANTTM 2 (DJI FPV Series) at https://www.dji.com/dji-fpv/downloads.
Warnings
1. Use this product within the operating temperature range. Avoid any sudden or large movements when
handling the product.
2. Fly in an environment away from electromagnetic interference such as power lines and metal structures.
Using this Manual
Legend
Warning Important Hints and Tips Reference
Read Before the First Flight
Visit the address below or scan the QR code to watch the tutorial videos, which demonstrate how
to use the DJI Motion Controller safely:
https://www.dji.com/dji-fpv/video
Download the DJI Fly App
Scan the QR code on the right to download DJI Fly.
The Android version of DJI Fly is compatible with Android v6.0 and later. The iOS version of DJI
Fly is compatible with iOS v11.0 and later.
4
© 2021 DJI All Rights Reserved.
Using this Manual 3
Legend 3
Read Before the First Flight 3
Download the DJI Fly App 3
Download the DJI Virtual Flight App 3
Download DJI Assistant 2 (DJI FPV series) 3
Warnings 3
Product Prole 5
Introduction 5
Diagram 5
Operation 7
Powering On/O 7
Charging 7
Linking 8
Activation 8
Controlling the Aircraft 8
Controlling the Camera 11
Optimal Transmission Zone 11
Goggles Screen 12
Appendix 14
Specications 14
Motion Controller Calibration 14
Firmware Update 14
After-Sales Information 15
Contents
5
© 2021 DJI All Rights Reserved.
Product Prole
Introduction
When used with the DJI FPV Goggles V2, the DJI Motion Controller provides an immersive and intuitive ying
experience that allows users to easily control the aircraft using hand movements. Built into the DJI Motion
Controller is DJI's O3 transmission technology, oering a maximum transmission range of 6 mi (10 km). The
motion controller works at both 2.4 and 5.8 GHz and is capable of selecting the best transmission channel
automatically. The maximum runtime of the motion controller is approximately 5 hours.
The motion controller reaches its maximum transmission distance (FCC) in a wide-open area with no
electromagnetic interference when the aircraft is at an altitude of approximately 400 ft (120 m). The
maximum transmission distance refers to the maximum distance that the aircraft can still send and
receive transmissions. It does not refer to the maximum distance the aircraft can y in a single ight.
5.8 GHz is not supported in certain regions. Observe local laws and regulations.
Diagram
1. Battery Level LEDs
Indicates the battery level of the motion controller.
2. Lock Button
Press twice to start the motors of the aircraft.
Press and hold to make the aircraft automatically take o, ascend to approximately 1 m, and hover.
Press and hold again to make the aircraft automatically land and the motors stop.
Press once to cancel Low Battery RTH when the countdown appears in the goggles.
3. Mode Button
Press once to switch between Normal and Sport mode.
12
34
5
6
7
89
10
DJI Motion Controller User Manual
6
© 2021 DJI All Rights Reserved.
4. Brake Button
Press once to make the aircraft brake and hover in place (only when GPS or Downward Vision System is
available). Press again to unlock the attitude and record the current position as zero attitude.
Press and hold to initiate RTH. Press again to cancel RTH.
5. Gimbal Tilt Slider
Push up and down to adjust the tilt of the gimbal (only available before takeo).
6. Shutter/Record Button
Press once to take photos or start or stop recording. Press and hold to switch between photo and video
mode.
7. Accelerator
Press to fly the aircraft in the direction of the circle in the goggles. Apply more pressure to accelerate.
Release to stop and hover.
8. Lanyard Hole
9. USB-C Port
For charging or connecting the motion controller to a computer to update rmware.
10. Power Button
Press once to check the current battery level. Press once then again and hold to power the motion
controller on or o.
7
© 2021 DJI All Rights Reserved.
Operation
Powering On/O
Press the power button once to check the current battery level. Recharge before using if the battery level is too low.
Press once then press again and hold to power the motion controller on or o.
LED1 LED2 LED3 LED4 Battery Level
Battery Level > 80%
75% < Battery Level ≤ 80%
63% < Battery Level ≤ 75%
50% < Battery Level ≤ 63%
38% < Battery Level ≤ 50%
15% < Battery Level ≤ 38%
8% < Battery Level ≤ 15%
0% < Battery Level ≤ 8%
Charging
5V, 1A
The battery level LEDs display the power level of the battery during
charging and discharging. The statuses of the LEDs are dened below:
LED is on.
LED is ashing.
LED is o.
Use a USB-C cable to connect a charger to the USB-C port of
the motion controller. It takes approximately 2.5 hours to fully
charge the motion controller.
The table below shows the battery level during charging.
LED1 LED2 LED3 LED4 Battery Level
0% < Battery Level ≤ 50%
50% < Battery Level ≤ 75%
75% < Battery Level < 100%
Fully charged
DJI Motion Controller User Manual
8
© 2021 DJI All Rights Reserved.
Linking
Follow the steps below to link the motion controller and the aircraft.
The aircraft must be linked with the goggles before the motion controller.
2s 2s
Make sure that all devices are powered on before linking.
1. Press and hold the power button of the aircraft until the battery level LEDs start to blink in sequence.
2. Press and hold the power button of the motion controller until it beeps continually and the battery level
indicators blink in sequence.
3. The motion controller stops beeping when linking is successful and both the battery level indicators turn
solid and display the battery level.
Activation
The DJI Motion Controller must be activated before using for the rst time. Make sure all devices are linked after
powering on the aircraft, goggles, and motion controller. Connect the USB-C port of the goggles to the mobile
device, run DJI Fly, and follow the prompts to activate. An internet connection is required for activation.
DJI Fly
App
Controlling the Aircraft
The motion controller has two modes: Normal mode and Sport mode. Normal mode is selected by default.
Zero attitude: the initial position of the motion controller that is used as a reference point when
any movements are made with the motion controller.
Before using for the rst time, practice ying with the motion controller using DJI Virtual Flight.
DJI Motion Controller User Manual
9
© 2021 DJI All Rights Reserved.
Motion Controller Aircraft & Goggles Screen
(Indicates nose direction) Remarks
Rotate the motion controller to control the orientation
of the aircraft.
The orientation of the aircraft changes with the rotation
of the motion controller accordingly and is always
consistent with the orientation of the motion controller.
The circle in the goggles will move left and right and
the video transmission will change accordingly.
The orientation of the aircraft can also be controlled by
tilting the motion controller left and right.
Tilt left to rotate the aircraft counterclockwise and tilt
right to rotate clockwise. The aircraft hovers in place if
the motion controller is at zero attitude.
The tilt angle corresponds to the angular velocity of
the rotation of the aircraft. The greater the tilt angle of
the motion controller, the faster the aircraft will rotate.
The circle in the goggles will move left and right and
the video transmission will change accordingly.
Tilt the motion controller up and down to control the
tilt of the gimbal.
The tilt of the gimbal changes with the tilt of the motion
controller accordingly and is always consistent with
the orientation of the motion controller.
The circle in the goggles will move up and down and
the video transmission will change accordingly.
To control the ascent or descent of the aircraft, rst tilt
the motion controller 90° up or down. Once complete,
press the accelerator to make the aircraft ascend or
descend.
Press the accelerator to y in the direction of the circle
in the goggles.
Apply more pressure to accelerate. Release to stop
and hover.
DJI Motion Controller User Manual
10
© 2021 DJI All Rights Reserved.
Brake Button
Lock Button
Mode Button
Lock Button
Press twice to start the motors of the aircraft.
Press and hold to make the aircraft automatically take o, ascend to approximately 1 m, and hover.
Press and hold while hovering to make the aircraft automatically land and the motors to stop.
Press once to cancel Low Battery RTH when the countdown appears in the goggles.
Critical Low Battery RTH cannot be canceled.
Brake Button
Press once to make the aircraft brake and hover in place. The goggles will show . Press again to unlock the
attitude and record the current position as zero attitude. To record the zero attitude, the motion controller must
be held upright and the white dot must be inside the box of the motion controller movement display. The box
turns to when the white dot is inside.
If the aircraft is performing RTH or auto landing, press once to exit RTH.
Press and hold the brake button until the motion controller beeps to indicate that RTH has started. Press the
button again to cancel RTH and regain control of the aircraft.
If the aircraft brakes and hovers, the zero attitude may need to be reset before the ight can resume.
Mode Button
Press once to switch between Normal and Sport mode. The current mode is displayed in the goggles.
Motion Controller Alert
The motion controller sounds an alert during RTH. The alert cannot be cancelled.
The motion controller sounds an alert when the battery level is 6% to 15%. A low battery level alert can be
cancelled by pressing the power button. A critical battery level alert will sound when the battery level is less
than 5% and cannot be cancelled.
Andere Handbücher für FC7BMC
2
Inhaltsverzeichnis
Andere dji Drohnen- und Quadcopter-Zubehör Handbücher
dji
dji Osmo Z-Axis Bedienungsanleitung
dji
dji AGRAS T30 Bedienungsanleitung
dji
dji Ronin Series Battery Power Distributor Bedienungsanleitung
dji
dji Snail Bedienungsanleitung
dji
dji MATRICE 300 RTK Bedienungsanleitung
dji
dji Zenmuse X5 Bedienungsanleitung
dji
dji RC Plus Bedienungsanleitung
dji
dji TB47S Bedienungsanleitung
dji
dji Zenmuse X9 Bedienungsanleitung
dji
dji MG Bedienungsanleitung
dji
dji DF03 Bedienungsanleitung
dji
dji 1345 Bedienungs- und Wartungsanleitung
dji
dji S800 Bedienungsanleitung
dji
dji E800 Bedienungsanleitung
dji
dji MATRICE 30 Series Bedienungsanleitung
dji
dji ZENMUSE H20T Bedienungsanleitung
dji
dji ZENMUSE XT 2 Bedienungsanleitung
dji
dji E7000 Bedienungsanleitung
dji
dji Dropsafe Bedienungsanleitung
dji
dji E5000 PRO Bedienungsanleitung
Beliebte Drohnen- und Quadcopter-Zubehör Handbücher anderer Marken
Opale Parachutes
Opale Parachutes SAFETECH 3.2K ST60 Bedienungsanleitung
Flycolor
Flycolor X-Cross Mini 4in1 Bedienungsanleitung
ParaZero
ParaZero SafeAir Phantom Bedienungsanleitung
HOBBYEAGLE
HOBBYEAGLE A3 Mini Bedienungsanleitung
TCMM RC
TCMM RC AC 220 Bedienungsanleitung
iKarus
iKarus Profi Gyro Bedienungsanleitung
