Dji Phantom 4 RTK Bedienungsanleitung

Andere Handbücher für Phantom 4 RTK

7

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere dji Drohnen- und Quadcopter-Zubehör Handbücher

dji

dji CINESSD Station Bedienungsanleitung

dji

dji ZENMUSE XT S Bedienungsanleitung

dji

dji Smart Controller Enterprise Bedienungsanleitung

dji

dji E5000 ADVANCED Bedienungsanleitung

dji

dji DL LENS Bedienungsanleitung

dji

dji FC7BMC Bedienungsanleitung

dji

dji datalink 3 Bedienungsanleitung

dji

dji Aeroscope AS-F1800 Bedienungsanleitung

dji

dji Avata ND8 Bedienungsanleitung

dji

dji GOGGLES Racing Edition Bedienungsanleitung

dji

dji Motion Controller Combo Bedienungsanleitung

dji

dji GO 4 Bedienungsanleitung

dji

dji Snail Bedienungsanleitung

dji

dji TB47S Bedienungsanleitung

dji

dji Snail Bedienungsanleitung

dji

dji Zenmuse X9 Bedienungsanleitung

dji

dji Takyon Updater Bedienungsanleitung

dji

dji PHANTOM 2 VISION PLUS Bedienungsanleitung

dji

dji M200 Series Bedienungsanleitung

dji

dji OSMO X5 Adapter Bedienungsanleitung

dji

dji 1345s Bedienungsanleitung

dji

dji Osmo Z-Axis Bedienungsanleitung

dji

dji Aeroscope upgrade module Bedienungsanleitung

dji

dji ZENMUSE XT 2 Bedienungsanleitung

Beliebte Drohnen- und Quadcopter-Zubehör Handbücher anderer Marken

A2Z Drone Delivery

A2Z Drone Delivery RDS2 Bedienungsanleitung

ParaZero

ParaZero SafeAir Mavic Bedienungsanleitung

JT

JT SS125 Bedienungsanleitung

RunCam

RunCam Phoenix HD Bedienungsanleitung

DRS

DRS DRS-M210-V2 Bedienungsanleitung

Kogan

Kogan 4K GALAXY Bedienungsanleitung

Opale Parachutes

Opale Parachutes SAFETECH 3.2K ST60 Bedienungsanleitung

Flycolor

Flycolor X-Cross Mini 4in1 Bedienungsanleitung

ParaZero

ParaZero SafeAir Phantom Bedienungsanleitung

HOBBYEAGLE

HOBBYEAGLE A3 Mini Bedienungsanleitung

TCMM RC

TCMM RC AC 220 Bedienungsanleitung

iKarus

iKarus Profi Gyro Bedienungsanleitung

R2TECK

R2TECK NEXG1 Bedienungsanleitung

Hesai

Hesai Pandar40P Bedienungsanleitung

Flycolor

Flycolor X-Cross HV 2 Series Bedienungsanleitung

CZZN

CZZN GL60 ZOOM Bedienungsanleitung

PowerVision

PowerVision PowerEgg Bedienungsanleitung

A2Z Drone Delivery

A2Z Drone Delivery RDS1 Bedienungsanleitung

DJI Enterprise

June 2019

Phantom 4 RTK Network RTK Setup Guide

1. Insert a WB37 Intelligent battery into the Phantom 4 RTK remote controller, turn on the

remote controller by quickly press twice and then hold the power button. !

2. Insert a Phantom 4 Intelligent Flight Battery into the Phantom 4 RTK aircraft and turn on

the aircraft by quickly press twice and then hold the power button located on the battery.!

3. If aircraft and remote controller

are already linked, skip to step 4."

"

Please follow the instruction on

the right to bind the remote

controller with the Phantom 4 RTK

aircraft.!

4. Connect the linked remote

controller with internet via either

Wi-Fi or 4G LTE network:"

"

"

"

1

Wi-Fi Connection:"

On the home screen, scroll down from the top of the screen to show the notiﬁcation center,

enable Wi-Fi connection by tap on the “Wi-Fi” icon once, tap and hold the “W-Fi” icon to

enter the Wi-Fi setting page. Under Wi-Fi settings page you can connect the remote

controller with your local Wi-Fi network."

Test procedure: Press the remote controller power button once, then press again and hold

to turn the remote controller on. In the DJI GS RTK app tap and select Network

Diagnostics. If the statuses of all the devices in the network chain are shown in green, the

dongle and the SIM card are functioning properly."

"

4G LTE Connection:"

Install a compatible 4G LTE Dongle* as follow: !

2

Passed

Failed

Test procedure: Press the remote controller power button once, then press again and hold to

turn the remote controller on. In the DJI GS RTK app tap and select Network

Diagnostics. If the statuses of all the devices in the network chain are shown in green the

dongle and SIM card are functioning properly.!

* LTE FDD B1/2/3/4/5/7/8/12&B17/20, UMTS B1/2/4/5/8, GSM 850/900/1800/1900 supported

is recommended in North America.!

5. Check if both aircraft and the remote controller is running the latest oﬃcial ﬁrmware. Then

select “Fly” on the main screen to enter the camera view of the Phantom 4 RTK.!

3

Failed

Passed

6. Under camera view window, tap the on the upper right corner of the screen to enter

the main settings menu, and then select to enter RTK setting page. Turn on the RTK

function and select “Custom network RTK” as RTK Service Type. !

4

1

2

3

4

7. Input your NTRIP Host name, Port number, User account, Password and Mountpoint

provided by the network RTK provider under RTK settings to conﬁg the Ntrip. Then tap

“Connect” to proceed: "

(We recommend to select the closest mount-point for better data accuracy)!

8. Check if the page shows the “Connection Success” message next to “Custom network

RTK Status” and the ﬁxed GPS coordinate of the station shows under “RTK Settings” page:!

5

9. If position shows “FLOAT” under RTK status list and error (“Cannot take oﬀ. -Weak RTK

Signal”) shows up on the camera view, reposition the Phantom 4 RTK aircraft on a ﬂat ﬁeld with

minimal surrounding obstacles and then wait for few minutes to gain more GPS/GNSS satellite

signal:!

Once the GPS/GNSS signal is suﬃcient for operation, the error would automatically disappear,

the aircraft position status would be changed to “FIX” on the status bar and “RTK Settings”

page:

6

Network RTK is now connected, and the Phantom 4 RTK should be ready for operation.

7