Dji BTU Bedienungsanleitung

BTU (Bluetooth Unit) Manual V1.04

BTU Bluetooth Unit is used with NM Assistant for wireless communication between

the autopilot system and mobile device. For NAZA-M Firmware V3.16 or above.

Supported Mobile devices

iPhone 4s、iPhone 5、iPod touch5、iPad mini、iPad3、iPad4

Specifications

Bluetooth version

4.0 or above

Weight

17g

Communication distance

50m

Consumption

240mw(0.04A@6V)

Environment temperature

-10℃~+50℃

Dimensions

25.4mm×25.4mm×7.2mm

Step 1: Connection

Connect the BTU to NAZA PMU V2 (Accessory of NAZA-M V2)

CAN-Bus port，for power

supply and communication

Antenna, the side

with LOGO should

be facing upwards

when mounting, and

avoid blocking.

BTU Status Indicator

Abnormal

Normal

Data communicating

Step 2: Usage of NM Assistant

1. Search the NM Assistant in App store on mobile device, or scan the

QR code on package to download the App and install it.

2. Enable the Bluetooth function on the mobile device.

3. Power on the autopilot system, make sure the BTU Status Indicator is

solid Green.

4. Run the NM Assistant. You may be asked to register through internet

when first login (the account of PC Assistant software is OK for login);

follow the tips to set Main Controller name and password.

5. Make sure NM Assistant and autopilot system connect successfully.

6. Set flying parameters in NM Assistant.

Step3: Flying test

Prepare the aircraft and make sure all connections are ok. Start Motors to takeoff the

aircraft.

View flying parameters.

Set gain value.

Set gimbal parameters.

Only gain value and gimbal parameter are available to configure during

flying; other parameters can be set only after landing.

FAQ

Problems

Reasons

Solutions

Status Indicator of

BTU is not solid

Green on.

Firmware of MC is out of date.

Please update firmware.

BTU and autopilot system

connection failure.

Please check the connection.

BTU damage.

Please contact your dealer.

CE Statement

Hereby, SZ DJI TECHNOLOGY CO. LTD declares that this device is in compliance

with the essential requirements and other relevant provisions of Directive 1999/5/EC.

FCC Statement：

This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment.

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused

by unauthorized modifications or changes to this equipment. Such modifications or

changes could void the user’s authority to operate the equipment.

DJI Statement

(1) Before use of the product, please accept some flight training (Using a simulator

to practice flying, getting instruction from a professional person, etc.).

(2) Check that all parts of the multi-rotor are in good condition before flight. Do not

fly with aging or broken parts.

(3) Check that the propellers and the motors are installed correctly and firmly before

flight. Make sure the rotation direction of each propeller is correct. Do not get

close to or even touch the working motors and propellers to avoid serious injury.

(4) Do not over load the aircraft.

(5) Make sure that the transmitter battery and flight battery are fully charged.

(6) Try to avoid interference between the remote control transmitter and other

wireless equipment.

(7) The fast rotating propellers of aircraft will cause serious damage and injury.

Always fly the aircraft 3m or above away from you and unsafe conditions, such as

obstacles, crowds, high-voltage lines, etc. FLY RESPONSIBLY.

(8) All parts must be kept out of the reach of children to avoid CHOKE HAZARD; if a

child accidentally swallows any part you should immediately seek medical

assistance.

Inhaltsverzeichnis

Andere dji Drohnen- und Quadcopter-Zubehör Handbücher

dji

dji GOGGLES Racing Edition Bedienungsanleitung

dji

dji 5048S Bedienungsanleitung

dji

dji E800 Bedienungsanleitung

dji

dji RC 2 Bedienungsanleitung

dji

dji E7000 Bedienungsanleitung

dji

dji Inspire 1 1345LS Bedienungsanleitung

dji

dji OSMO ACTION 3 Bedienungsanleitung

dji

dji TB60 Betriebsanleitung

dji

dji MATRICE 300 RTK Bedienungsanleitung

dji

dji Zenmuse X5 Bedienungsanleitung

dji

dji M200 Series Bedienungsanleitung

dji

dji OSMO X5 Adapter Bedienungsanleitung

dji

dji ZENMUSE L2 Bedienungsanleitung

dji

dji E5000 ADVANCED Bedienungsanleitung

dji

dji RC Plus Bedienungsanleitung

dji

dji PHANTOM 2 VISION PLUS Bedienungsanleitung

dji

dji SNAIL 2305 Bedienungsanleitung

dji

dji datalink 3 Bedienungsanleitung

dji

dji ZENMUSE L1 Bedienungsanleitung

dji

dji Snail Bedienungsanleitung

dji

dji ZENMUSE XT S Bedienungsanleitung

dji

dji AGRAS T50 Bedienungsanleitung

dji

dji RD2412R Bedienungsanleitung

dji

dji Transmission Standard Combo Bedienungsanleitung

Beliebte Drohnen- und Quadcopter-Zubehör Handbücher anderer Marken

A2Z Drone Delivery

A2Z Drone Delivery RDS2 Bedienungsanleitung

ParaZero

ParaZero SafeAir Mavic Bedienungsanleitung

JT SS125 Bedienungsanleitung

RunCam

RunCam Phoenix HD Bedienungsanleitung

DRS

DRS DRS-M210-V2 Bedienungsanleitung

Kogan

Kogan 4K GALAXY Bedienungsanleitung

Opale Parachutes

Opale Parachutes SAFETECH 3.2K ST60 Bedienungsanleitung

Flycolor

Flycolor X-Cross Mini 4in1 Bedienungsanleitung

ParaZero

ParaZero SafeAir Phantom Bedienungsanleitung

HOBBYEAGLE

HOBBYEAGLE A3 Mini Bedienungsanleitung

TCMM RC

TCMM RC AC 220 Bedienungsanleitung

iKarus

iKarus Profi Gyro Bedienungsanleitung

R2TECK

R2TECK NEXG1 Bedienungsanleitung

Hesai

Hesai Pandar40P Bedienungsanleitung

Flycolor

Flycolor X-Cross HV 2 Series Bedienungsanleitung

CZZN

CZZN GL60 ZOOM Bedienungsanleitung

PowerVision

PowerVision PowerEgg Bedienungsanleitung

A2Z Drone Delivery

A2Z Drone Delivery RDS1 Bedienungsanleitung

dji BTU Bedienungsanleitung

Beliebte Drohnen- und Quadcopter-Zubehör Handbücher anderer Marken