STEP TWO:
INSTALL TWO SIDE UPRIGHTS BETWEEN TWO SIDE PLATESAS
SHOWN USING (4X) MATING BOLTS PER SIDE. MAKE SURE
DYNAMIC LABEL IS FACING OUTWARDS ON BOTH UPRIGHTS.
KEEP BOLTS SLIGHTLY LOOSE.
STEP ONE:
INSTALL CENTER CROSSBAR INBETWEEN TWO BASE TUBES
USING (4X) MATING BOLTS AS SHOWN.
KEEP BOLTS SLIGHTLY LOOSE.
CUSTOMER SERVICE: 844-678-7447
WWW.MYDYNAMICFITNESS.COM
