Edelbrock 5280 Bedienungsanleitung

•INSTALLATION:

1. Place vehicle on level, stable ground (i.e. concrete driveway).

2. Raise vehicle and support under the frame so rear end can be raised and lowered if needed.

Removing rear wheels is not required, but can be helpful.

3. Unbolt front bushing bracket from transmission.

4. Unbolt rear of torque arm from rear end. To remove bolts, it may be necessary to raise or lower

rear end. Remove torque arm from chassis.

5. Remove front bushing and bushing bracket from O.E.M. arm.

TORQUE ARM #5280

For 1984-2002 Camaro/Firebird

INSTALLATION INSTRUCTIONS

Please read and study these instructions before installing your new torque arm. If you have any questions,

please contact us at our Technical Hotline: 1-800-416-8628, 7:00 am –5 pm, Monday through Friday, Pacific

Standard Time.

•NOTE:

This torque arm is designed to fit

1984-2000 Camaro/Firebird with

front torque arm locator lips

facing away from driveshaft. See

Figure 1.

•PREPARATION CHECKLIST: The following equipment is required:

üJack

üJack stands (4 required)

üDrill with 7/32 drill bit or grinder to remove rivets

ü13mm, 15mm, 21mm Socket and wrenches

üTorque wrench

üThread lock compound

•CAUTION:

Installation requires being under

raised vehicle. Support vehicle

on level and stable ground, using

proper load rated jack stands.

Viewed From Rear of Transmission

Lip

Correct Incorrect

Lip

Lips Facing Away

From Driveshaft Lips Facing

Towards Driveshaft

Fig. 1

•NOTE:

To further upgrade your suspension, use other Edelbrock suspension, components, such as: springs,

shocks, trailing arms, panhard rod, strut tower brace, and sub-frame connectors.

6. Drill or grind off rivet heads (Figure 2) and

disassemble bracket. Remove O.E.M.

bushing from bracket assembly.

7. Install inner bracket onto transmission.

8. Place the new torque arm under vehicle

and onto rear end with factory bolts and

washers. Use supplied washers between

rear end housing and torque arm bracket,

only if needed. Use thread-locking

compound. Leave bolt loose at this time.

9. Grease inside of new polyurethane bushing

with supplied grease, and install onto

torque arm with part number on bushing

facing rear of vehicle. Position in inner

bracket.

10. Install outer bracket and tighten at this

time.

11. Torque rear bolts to 97 ft./lbs.

12. After driving approximately 10 miles,

re-torque all bolts and check on regular

basis.

Inner/Outer Bracket

Fig. 2

Outer Bracket Inner Bracket

Edelbrock Corporation, 2700 California Street, Torrance, California 90503

Toll-Free Tech Line (800) 416-8628

Tech E-mail: edel[email protected]

2001 Edelbrock Corporation Revised 7/01 (R&D)

Rivet Rivet Rivet

Rivet

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock Pro-Flo Multi-Point Bedienungsanleitung

Edelbrock

Edelbrock 72310 Bedienungsanleitung

Edelbrock

Edelbrock 5772 Bedienungsanleitung

Edelbrock

Edelbrock 460 Ford Bedienungsanleitung

Edelbrock

Edelbrock Victor Glidden 18 2858 Bedienungs- und Wartungshandbuch

Edelbrock

Edelbrock Performer RPM 60219 Bedienungsanleitung

Edelbrock

Edelbrock 396-502 Bedienungsanleitung

Edelbrock

Edelbrock 63-0144 Bedienungsanleitung

Edelbrock

Edelbrock 67082 Bedienungsanleitung

Edelbrock

Edelbrock 5776 Bedienungsanleitung

Edelbrock

Edelbrock 2760 Bedienungsanleitung

Edelbrock

Edelbrock Turbocharger 15012 Bedienungsanleitung

Edelbrock

Edelbrock 6571 Bedienungsanleitung

Edelbrock

Edelbrock 63-65903 Bedienungsanleitung

Edelbrock

Edelbrock 17932 Bedienungsanleitung

Edelbrock

Edelbrock 8123 Bedienungsanleitung

Edelbrock

Edelbrock 3550 Bedienungsanleitung

Edelbrock

Edelbrock Performer-Plus 2172 Bedienungsanleitung

Edelbrock

Edelbrock 1901 Bedienungsanleitung

Edelbrock

Edelbrock 68952 Bedienungsanleitung

Edelbrock

Edelbrock 5253 Bedienungsanleitung

Edelbrock

Edelbrock 5204 Bedienungsanleitung

Edelbrock

Edelbrock 7788 Bedienungsanleitung

Edelbrock

Edelbrock PERFORMER-PLUS 2182 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung