Ekwb EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -... Bedienungsanleitung

USER GUIDE

MONOBLOCK

EK-Quantum

Momentum2Aorus Z690 Master D-RGB

This product is intended for installation only by expert users. Please

consult with a qualiﬁed technician for installation. Improper installation

may result in damage to your equipment. EK Water Blocks assumes no

liability whatsoever, expressed or implied, for the use of these products,

nor their installation. The following instructions are subject to change

without notice. Please visit our website at www. ekwb.com for updates.

Before installation of this product please read the important notice,

disclosure, and warranty conditions printed on the back of the box.

Before you start using this product, please follow these basic guidelines:

Please carefully read the manual thoroughly before beginning

the installation process!

Please remove your motherboard from the computer to

assure the safest mounting process in order to prevent any

possible damages to your CPU and/or motherboard’s circuit

board (PCB).

The EK-Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured by the

rubber o-ring gaskets.

The use of quality, market-proven corrosion inhibiting

coolants is always strongly recommended for any liquid

cooling system.

- 3 -

TABLE OF CONTENTS

BOX CONTENTS 4

WATER BLOCK DIMENSIONS 5

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS 6

PREPARING THE MOTHERBOARD 7

REMOVING THE BACKPLATE 7

REMOVING THE STOCK COOLER 8

CUTTING AND PLACING THERMAL PADS 9

APPLYING THERMAL COMPOUND 10

PREPARING THE WATER BLOCK FOR INSTALLATION 10

ATTACHING THE WATER BLOCK 11

CONNECTING THE D-RGB LED STRIP 13

TESTING THE LOOP 13

SUPPORT AND SERVICE 14

SOCIAL MEDIA 14

- 4 -

BOX CONTENTS

Allen Key 2 mm (1 pc)

Allen Key 2.5 mm (1 pc)

Thermal Pad F 1.0 mm (120x16) (4 pcs)

Thermal Grease (1 pc)

EK-Quantum Momentum2Aorus Z690 Master D-RGB

120 mm

16 mm

- 5 -

WATER BLOCK DIMENSIONS

39.4 mm

32.5 mm

93.2 mm

167.5 mm

142.6 mm

39.3 mm

67.3 mm

176.3 mm

134.5 mm

12.9 mm

119 mm

- 6 -

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS

Technical Speciﬁcation:

- Dimensions: (LxHxW) – 176.3 x 142.6 x 39.4 mm

- D-RGB cable length: 500 mm

- D-RGB LED count: 20

- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Position EAN Description Quantity

1104977 Top plate (Plexi) 1

2105225 Main O-ring 200 x 1.5 mm 1

3105251 Mid plate Assembly 1

48208 Screw M3 x 8 DIN7991 4

5104970 Mosfet (Black e.) 1

6105038 I/O Cover stand 1

7100258 Standoff M4/M2 x 2.5 5

8104771 M3 x 20 DIN7991 4

98201N Screw M3 x 10 DIN7991 8

10 104028 Coldplate (Nickel) 1

11 100500 M4 x 12 DIN7991 4

12 104650 Backplate Assebly 1

13 104773 Coldplate o-ring 1

14 104029 Jet plate 1

15 104974 Mosfet W (Nickel) 1

16 104972 Mosfet N (Nickel) 1

17 5163 OR 18 x 1.5 mm 1

18 5035 OR 26 x 1.5 mm 1

19 5158 OR 35 x 1.5 mm 1

20 10946 D-RGB Led strip 1

21 104976 Standout (Acetal) 1

22 100663 EK - Badge 1

23 104444 Mylar sticker 1

- 7 -

PREPARING THE MOTHERBOARD

STEP 1

REMOVING THE BACKPLATE

Important! Before starting, make sure to have a clean,

flat surface to work on. It is recommended to put foam

or soft material to lay the motherboard and the water

block on.

Remove the marked screws in order to detach the backplate from

the motherboard.

After monoblock installation, the backplate can be reused.

STEP 1

REMOVE

REMOVE FROM THE FRONT SIDE

OF THE MOTHERBOARD

- 8 -

STEP 2

REMOVING THE STOCK COOLER

Additional four(4) screws and three(3) standoffs must be removed

in order to remove the original stock cooler.

After removing the screws and standoffs, carefully detach

the stock cooler and pre-applied thermal pads. EK provides

replacement thermal pads with the water block (Chapter:

CUTTING AND PLACING THERMAL PADS).

Save the screws and standoffs for later use ( Chapter: ATTACHING

THE WATER BLOCK).

STEP 2

REMOVE

- 9 -

CUTTING AND PLACING THERMAL PADS

Thermal Pad F – 1.0 mm (120 x 16 mm)

120 mm

16 mm

1 mm

STEP 1

EK-Quantum Momentum2Aorus Z690 Master D-RGB water

block comes with Thermal Pads that have to be cut into smaller

pieces to cover all the regulation area (Mosfet) on the motherboard.

EK made sure to provide you with more than an adequate quantity of

Thermal Pads to complete this Step.

Please remove the protective foil from both sides of the

thermal pads prior to installation!

Replacement thermal pads:

Thermal Pad F 1.0 mm – (120 x 16 mm) EAN: 3830046996732

For this step, you will need:

Scissors

Thermal Pad - 120 x 16 x 1.0 mm

STEP 1

- 10 -

Thermal Grease

STEP 1

Apply the enclosed EK-TIM Ectotherm thermal grease (thermal

compound) on the CPU heat spreader – IHS – as shown in the

image. The layer of the thermal compound must be thin and even

in thickness over the entire surface of the IHS.

The excessive or uneven application of thermal grease

may lead to poor performance!

STEP 1

APPLYING THERMAL COMPOUND

For this step, you will need:

PREPARING THE WATER BLOCK FOR INSTALLATION

STEP 1

Unscrew four (4) Velocity2mounting nuts (turn them in an

anticlockwise direction to unscrew). Remove the backplate and

save it for later steps. After the backplate is removed, do not

forget to peel off the protective sticker.

STEP 1

PROTECTIVE

STICKER

BAC KP L ATE

Andere Handbücher für EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -...

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ekwb Computerhardware Handbücher

ekwb

ekwb EK-XRES DCP 4.0 Handbuch

ekwb

ekwb EK-FC560 GTX Handbuch

ekwb

ekwb EK-Quantum Vector Trinity RTX 3080/3090 Bedienungsanleitung

ekwb

ekwb EK-FC7990 Handbuch

ekwb

ekwb EK-FB KIT GA-X99 LE Leitfaden

ekwb

ekwb EK-Supremacy MX AMD Series Bedienungsanleitung

ekwb

ekwb EK-FC680 GTX SOC water block Leitfaden

ekwb

ekwb EK-Quantum Vector Trio RTX 2080 Ti Bedienungsanleitung

ekwb

ekwb Supremacy EVO Bedienungsanleitung

ekwb

ekwb EK-FC480 GTX Handbuch

ekwb

ekwb EK-Momentum MSI Z390 MEG GODLIKE Bedienungsanleitung

ekwb

ekwb EK-FB ASUS Strix X299-E RGB Monoblock Bedienungsanleitung

ekwb

ekwb EK-Quantum Reflection Uni 140 D5 PWM D-RGB Bedienungsanleitung

ekwb

ekwb EK-FB ASUS P7P55 KIT Leitfaden

ekwb

ekwb EK-RES X3 Series Handbuch

ekwb

ekwb EK-Quantum Momentum ROG Zenith II Extreme Bedienungsanleitung

ekwb

ekwb EK-KIT HT Series Bedienungsanleitung

ekwb

ekwb EK-Quantum Vector FE RTX 3090... Bedienungsanleitung

ekwb

ekwb EK-FB ASRock X399 RGB Monoblock Bedienungsanleitung

ekwb

ekwb EK-FC980 GTX Ti WF3 Handbuch

ekwb

ekwb MSI MPG Z490 Carbon EK X Bedienungsanleitung

ekwb

ekwb EK-Quantum Momentum VRM Bridge ROG Maximus XII Formula D-RGB -... Bedienungsanleitung

ekwb

ekwb EK-Quantum Velocity 2 D-RGB AM4 Bedienungsanleitung

ekwb

ekwb EK-Loop PCI Bracket Pass-Through Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

ekwb EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -... Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken