Elation Event Brick W System Bedienungsanleitung

Rev. 5/01/2009 Software Ver 1.0

Event Brick W System

Elation Professional

6122 S. Eastern Ave.

Los Angeles, Ca. 90040

www.elationlighting.com

Event Brick System™

©Elation Professional® 2 Event Brick System™

Event Brick System™

©Elation Professional® 3 Event Brick System™

CONTENTS

1. General Information……………………………………………………………………… 4

a. Introduction………………………………………………………………………. 4

b. Unpacking………………………………………………………..………..…..… 4

c. Customer Support…………………………………………….………………… 4

d. Warranty Registration……………………………………………….……..…… 5

2. Safety Instructions………………………………………………………........…………. 6

3. Features……………………………………………………………………………………8

4. General Guidelines………………………………………………………………………. 9

5. Fixture Overview…………………………………………………………….…………… 10

6. Mounting and Installation………………………………………………………….……. 14

a. Yoke Assembly….……………………………………………..………………… 14

b. Mounting Points…………………………………………………………………. 16

c. Securing………………………………………………………………………….. 18

7. Understanding DMX……………………………………………………………………... 19

a. DMX X Cable Requirements...………………………………………………….19

b. DMX Terminator…………………………………………………………………. 21

c. 3-Pin to 5-Pin Conversion……………………………………………………….21

8. Fixture Menu……………………………………………………………………………… 23

a. Menu functions………………………………………………………………….. 23

9. DMX Addressing……...………………………………………………………………….. 26

10. Operation…………………………………………………………………………………. 28

11. Built-In Wireless Receiver……………………………………………………………… 30

12. Working with Built-In Programs……………………………………….……………….. 32

13. DMX Channel Traits…………………………………………………………………….. 38

14. Lens Replacement………………………………………………………………………..47

15. Cleaning and Maintenance……………………………………………………………… 48

16. Photometric Data………………………………………………………………………… 49

17. Dimensional Drawings………………………………………………….……………….. 50

18. Circuit Schematic………...……………………………………………………………….51

19. Battery Pack……………………………………………………………………………….52

20. Warranty…………………………………………………………………………………... 53

21. Technical Specifications…………………………………………...………….………… 55

Event Brick System™

©Elation Professional® 4 Event Brick System™

1. GENERAL INFORMATION

INTRODUCTION: Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The Event Brick System™ has been designed

to perform reliably for years when the guidelines in this booklet are followed. Please read

and understand the instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information regarding safety during

use and maintenance.

UNPACKING: Thank you for purchasing the Event Brick System™ by Elation Professional®.

Every unit has been thoroughly tested and has been shipped in perfect operating condition.

Carefully check the shipping carton for damage that may have occurred during shipping. If

the carton appears to be damaged, carefully inspect your unit for damage and be sure all

accessories necessary to operate the unit have arrived intact. In the event damage has been

found or parts are missing, please contact our customer support team for further instructions.

Package contents included; 1 Event Brick, 1 battery pack, 1 battery Omega-clamp, 1 3-Pin

DMX cable, 1 safety cable, warranty card, and this user manual.

CUSTOMER SUPPORT: Elation Professional® provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up

or initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional®.

Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.

Please do not return this unit to your dealer without first contacting customer support at the

number listed below.

Voice: (323) 582-3322

Fax: (323) 832-9142

E-mail: [email protected]

Forum: www.ElationLighting.com/forum

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Event Brick System™

©Elation Professional® 5 Event Brick System™

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Elation Encourages Recycling: Please do not discard the shipping carton in the trash.

Please recycle whenever possible.

WARRANTY REGISTRATION: The Event MH™ carries a two year (730 days) limited

warranty. Please fill out the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid and accompany a

return authorization (R.A.) number. The R.A. number must be clearly written on the outside

of the return package. A brief description of the problem as well as the R.A. number must

also be written down on a piece of paper and included in the shipping container. If the unit is

under warranty, you must provide a copy of your proof of purchase invoice. Items returned

without a R.A. number clearly marked on the outside of the package will be refused and

returned at customer’s expense. You may obtain a R.A. number by contacting customer

support at (323) 582-3322.

Never open this fixture while in use!

This device falls under protection-class 1. Therefore it is essential that the device be

grounded properly.

Be sure the available voltage matches the voltage requirements of the unit.

Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace

it immediately with a new one of similar power rating.

Always disconnect from main power before performing any type of service or any cleaning

procedure.

Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of

the cord.

Please be aware that damages caused by manual modifications to the device are not

subject to warranty.

Event Brick System™

©Elation Professional® 6 Event Brick System™

2. SAFETY INSTRUCTIONS

The Event MH™ is an extremely sophisticated piece of electronic

equipment. To guarantee a smooth operation, it is important to

follow the guidelines in this manual. The manufacturer of this

device will not accept responsibility for damages resulting from

the misuse of this fixture due to the disregard of the information

printed in this manual.

1. In the event the main power cord to this fixture becomes damaged, it should only be

repaired or replaced by Elation Professional, an authorized Elation service center,

or a similar qualified technician to prevent electrical hazard.

2. Always be sure that the fan and the air inlets remain clean and are never blocked.

Allow about 6” (15cm) between this fixture and other devices or a wall to allow for

proper cooling.

3. Never touch the fixture during normal operation. This can cause severe personal

injuries and/or damage to the fixture.

4. Be sure to unplug the EVENT BRICK™ from the power outlet before performing any

service related issues.

5. Never look directly into the light source. You risk injury to your retina, which may

induce blindness.

6. For safe operation, follow the Installation guide described in chapter two of this

manual. Operating the EVENT BRICK™ without suited safety aids such as safety

cables or clamps can increase the risk of damage and/or personal injury.

7. Installation should only be performed by qualified and certified personnel.

8. When mounting this fixture, use only the original rigging parts included with this

fixture. Any structural modification will void the original manufactures warranty and

may increase the risk of damage and/or personal injury.

9. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture.

10. Do not attempt to operate this fixture if the power cord has become damaged or

frayed.

Event Brick System™

©Elation Professional® 7 Event Brick System™

11. Never charge the Battery and run the fixture on battery power at the same time.

This will damage the battery pack.

12. Never dispose of the battery pack in fire or incinerate, doing so may lead to

explosion.

13. When running the fixture with line voltage, be sure to disconnect the battery lead.

14. It is important to avoid overcharging and/or discharging. Be sure to charge the

battery immediately after use.

15. Charge the batteries, at least once, every six months during storage below 25˚C.

The period of this charge must be shortened to half by temperature rising in every

10˚C.

16. Avoid locating the batteries near a heat-generating device (such as a transformer)

or near fire. Do not locate the batteries near a device that may cause sparks, and

keep open flames from the battery at all times.

17. Do not place the batteries in an atmosphere of organic solvent or adhesive

materials.

18. Dismantling the battery is not advisable. If sulfuric acid is deposited on skin or

clothes, please wash well with sufficient amount of fresh water and obtain

immediate medical attention.

19. Fasten the batteries securely to protect it from abnormal vibration and shocks

during service.

20. Check the batteries for any sign of irregularities in appearance. If any damage such

as a crack and deformation, or electrolyte leakage is found on the case, cover, etc.,

the batteries must be replaced.

21. Do not short batteries. Do not attempt to disassemble the batteries. Avoid contact

with sulfuric acid leaked from the broken batteries.

Important Notice: Damages resulting from the disregard of safety and general user

instructions found in this user manual are not subject to any warranty claims.

Event Brick System™

©Elation Professional® 8 Event Brick System™

3. FEATURES

•Low power consumption

•Runs on Battery or Wall Voltage

•Wireless DMX Receiver Built-in

•Minimal heat emission

•Equipped with 12 one-watt LEDs: (4 red, 4 blue, 4 green)

•High quality Luxeon LEDs manufactured by Lumileds, USA

•100,000 hours RATED LEDs

•Smooth RGB additive color mixing, 16.7 million colors (24bit)

•Preprogrammed colored macros

•Strobe-effect with a maximum flash rate of 18fps (white or color)

•3, 4, 6, 12, or 15 DMX-channel operation

•Flicker-free operation for television and film

•Brilliant light output

•3 operation mode: DMX controlled, stand alone or sound activated (via internal

microphone)

•Dimmer intensity from 0%~100%

•Control board with 4-digit display and foil-keyboard

•Digital display can be turned 180° to fit different installation position

•RDMX (Remote DMX addressing from any DMX console)

•USITT DMX-512 Complaint

•Value of each DMX-channel can be displayed

•8 User Assignable Program Presets - Internal Program: Edit and save programs to

the incorporated EEPROM through the front control panel or external controller; you

can save a maximum of 48 scenes, and run the saved programs by using the “run”

menu on the front control panel

Event Brick System™

©Elation Professional® 9 Event Brick System™

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in

theatres, etc. Do not attempt operation or installation without a proper knowledge on how to

so.

This fixture was designed for indoor use only, use of this product outdoors will void all

warranties written or implied.

Although this fixture has not duty cycle, consistent operational breaks will ensure that the

fixture will function properly for many years to come.

Do not shake the fixture around. Avoid brute force when installing or operating the device.

When choosing an installation location, please be sure the fixture will not be exposed to

extreme heat, moisture, or dust. The minimum distance between the fixture and a wall or flat

surface should be at least .5 meter (about 1.5ft).

Always install the fixture with an appropriate safety cable. When installing the fixture in a

suspended environment always be to use mounting hardware no less than M10 x 25 mm,

also be sure the hardware is insert in the pre-arranged mounting holes in the bracket (see

page 17).

Do not attempt to operate this fixture until you have familiarized yourself with its functions.

Do not permit operation by persons not qualified for operating this type of theatrical fixture;

most damages are the result of operations by persons unfamiliar with this type of product.

Event Brick System™

©Elation Professional® 10 Event Brick System™

5. FIXTURE OVERVIEW

1. Hanging Bracket – The unit uses a unique sectional bracket that allows the unit to

be hung, mounted, or stood straight up.

2. LED Assembly/Diffusion Lens – One-watt Lumileds LED’s by Luxeon rated at

100,000 hours (4 red, 4 green, 4 blue). This lens is used to both protect the LEDs as

Inhaltsverzeichnis

Andere Elation Scheinwerfer Handbücher

Elation

Elation CMY Zoom 250 Bedienungsanleitung

Elation

Elation VISION 575 Bedienungsanleitung

Elation

Elation ELAR EXFLOOD Bedienungsanleitung

Elation

Elation CUEPIX BLINDER WW2 Bedienungsanleitung

Elation

Elation EVENT BAR Bedienungsanleitung

Elation

Elation POWER SPOT 700CMY II Bedienungsanleitung

Elation

Elation ELED DW PAR56 Bedienungsanleitung

Elation

Elation PALADIN Bedienungsanleitung

Elation

Elation E Spot Led Bedienungsanleitung

Elation

Elation RAYZOR BEAM 2R Bedienungsanleitung

Elation

Elation EVC MH LED Bedienungsanleitung

Elation

Elation DESIGN SPOT 575E Bedienungsanleitung

Elation

Elation DLED Par Zoom Bedienungsanleitung

Elation

Elation DW CHORUS 24 Bedienungsanleitung

Elation

Elation Active Scan 250 Bedienungsanleitung

Elation

Elation ACL PAR 200 Bedienungsanleitung

Elation

Elation TVL2000 II Bedienungsanleitung

Elation

Elation VISION 250 Bedienungsanleitung

Elation

Elation Waterfall 250 Bedienungsanleitung

Elation

Elation VISION 250 Bedienungsanleitung

Elation

Elation ACL 360 MATRIX Bedienungsanleitung

Elation

Elation DESIGN PROMO 360 Bedienungsanleitung

Elation

Elation KL FRESNEL 4 Bedienungsanleitung

Elation

Elation DLED 12 BRICK Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung