Elation E Spot Led Bedienungsanleitung

Rev. 6/22/2010 –visage Version 1.0

Elation Professional

6122 S Eastern Ave

Los Angeles, Ca 90040

www.elationlighting.com

E SPOT LED™

©Elation Professional, Los Angeles Ca. 2www.ElationLighting.com

E SPOT LED™

©Elation Professional, Los Angeles Ca. 3www.ElationLighting.com

CONTENTS

1. General Information……………………………………………………………………… 4

a. Introduction……………………………………………………………………….4

b. Unpacking………………………………………………………..…………..….. 4

c. Customer Support…………………………………………….………………… 4

d. Warranty Registration……………………………………………………..…….5

2. Safety Instructions………………………………………………………........………….6

3. Features……………………………………………………………………………………7

4. General Guidelines……………………………………………………………………….8

5. Fixture Overview………………………………………………………………………….9

6. Mounting and Installation………………………………………………………….……..12

a. Mounting Positions……………………………………………………………… 12

b. Mounting Points………………………………………………………………….13

c. Securing………………………………………………………………………….. 14

7. Understanding DMX……………………………………………………………………...15

a. DMX Cable Requirements……..……………………………………………….15

b. DMX Terminator………………………………………………………………….17

c. 3-Pin to 5-Pin Conversion……………………………………………………….17

8. Fixture Menu……………………………………………………………………………… 19

a. Menu functions………………………………………………………………….. 21

9. DMX Addressing..……………………………………………………………..………….37

10. DMX Channel Traits…...….…………………………………………………………….. 39

a. DMX Channel Values…………………………………………………………… 40

11. Error Codes……………………………………………………………………………….43

12. Cleaning and Maintenance………………………………………………………………45

13. Photometric Data………………………………………………………………………….46

14. Gobos……………………………………………………………………………………... 47

15. Dimensional Drawings………………………………………………….……………….. 48

16. Circuit Schematic………...……………………………………………………………….49

17. Warranty………………………………………………………………………………...… 50

18. Technical Specifications…………………………………………...………….………… 52

E SPOT LED™

©Elation Professional, Los Angeles Ca. 4www.ElationLighting.com

1. GENERAL INFORMATION

INTRODUCTION: Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The E Spot LED™has been designed to

perform reliably for years when the guidelines in this booklet are followed. Please read and

understand the instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information regarding safety during

use and maintenance.

UNPACKING: Thank you for purchasing the E Spot LED™by Elation Professional®. Every E

Spot Led™has been thoroughly tested and has been shipped in perfect operating condition.

Carefully check the shipping carton for damage that may have occurred during shipping. If

the carton appears to be damaged, carefully inspect your unit for damage and be sure all

accessories necessary to operate the unit have arrived intact. In the event damage has been

found or parts are missing, please contact our customer support team for further assistance.

Please do not return this unit to your dealer without first contacting customer support at the

number listed below.

Inside the box you should find: the E Spot LED, a DMX cable, a safety cable,two omega

clamps and this manual. Please contact customer support at the number listed below if any

items are missing.

During initial fixture start-up, the fixture may omit some light smoke or release a

slight burning smell. This is a normal process and should decrease gradually.

CUSTOMER SUPPORT: Elation Professional®provides a customer support line, to provide

set up help and to answer any question should you encounter problems during your set up

or initial operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation Professional®.

Service Hours are Monday through Friday 8:00 a.m. to 5:00 p.m. Pacific Standard Time.

Voice: (323)582-3322

Fax: (323)832-9142

E-mail: support@elationlighting.com

Forum: www.ElationLighting.com/forum

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

E SPOT LED™

©Elation Professional, Los Angeles Ca. 5www.ElationLighting.com

rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Please do not discard the shipping carton in the trash. Please save for return shipping in the

event service is ever needed or recycle the container whenever possible.

WARRANTY REGISTRATION: The E Spot LED™carries a two year (730 days) limited

warranty. Please fill out the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid and accompany a

return authorization (R.A.) number. The R.A. number must be clearly written on the outside

of the return package. A brief description of the problem as well as the R.A. number must

also be written down on a piece of paper and included in the shipping container. If the unit is

under warranty, you must provide a copy of your proof of purchase invoice. Items returned

without a R.A. number clearly marked on the outside of the package will be refused and

returned at customer’s expense. You may obtain a R.A. number by contacting customer

support at(323) 582-3322.

Epileptic Warning:Those suffering from epilepsy should avoid looking directly into the light

source at all times.

Never open this fixture while in use!

This device falls under protection-class 1. Therefore it is essential that the device be

grounded properly.

All electrical connections must be performed by qualified personal.

Be sure the available voltage matches the voltage requirements of the unit.

Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace

it immediately with a new one of similar power rating.

Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of

thecord.

E SPOT LED™

©Elation Professional, Los Angeles Ca. 6www.ElationLighting.com

2. SAFETY INSTRUCTIONS

The E Spot LED™is an extremely sop

histicated piece of

electronic equipment. To guarantee a trouble free operation, it is

important to follow the guidelines in this manual. Elation will not

accept responsibility for damages resulting from the misuse of

this fixture due to the disregard of t

he information printed in this

manual.

1. Always be sure that the fan and the air inlets remain clean and are never blocked.

Allow about 6” (15cm) between this fixture and other devices or a wall to allow for

proper cooling.

2. Never touch the fixture during normal operation. This can cause severe personnel

injuries and/or damage to the fixture.

3. Be sure to unplug the E Spot LED™from the power outlet before performing any

service or cleaning related issues.

4. Never look directly into the light source. You risk injury to your retina, which may

induce blindness.

5. For safe operation, follow the Installation guide described in chapter two of this

manual. Operating the E Spot LED™without suited safety aids such as safety

cables or clamps can increase the risk of damage and/or personal injury.

6. When mounting this fixture, use only the original rigging parts included with this

fixture. Any structural modification will void the original manufactures warranty and

may increase the risk of damage and/or personal injury.

7. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture.

8. Do not attempt to operate this fixture if the power cord has become damaged or

frayed.

9. Installation should only be performed by qualified and certified personal.

Important Notice: Damages resulting from the disregard of safety and general user

instructions found in this user manual are not subject to any warranty claims.

E SPOT LED™

©Elation Professional, Los Angeles Ca. 7www.ElationLighting.com

3. FEATURES

•Pan 540° or 630° (User selectable) / Tilt 270°

•15° BeamAngle

•Upgradeable Firmware via Elation E-Load Programmer

•Low Power Consumption

•60 WATT White LED Source (Over 2,200 lumens from a single chip)

•60,000 hoursratedLED life

•Color Wheel: 8colors plus white,withrainboweffect

•Rotating gobo wheel with 7 rotating gobos plus open, all gobos can be easily

replaceable and gobo indexing

•Prism and Prism Rotation,with 16 prism macros (Indexable)

•Flicker-free operation for television and film

•3 operation mode: DMX controlled, stand alone or sound activated

•Strobeeffect: 0~18 flashes per second or random strobe

•0%~100% Dimming (two dimming options; linear & standard)

•Control board with 4-digit display and foil-keyboard

•Digital display canbeturned 180°to fit different installation position

•RDMX (Remote DMX addressing from any DMX console)

•Auto test for all functions

•Automatic Pan/Tilt Correction

•USITT DMX-512 Complaint (3-pin and 5-pin DMX Connections)

•Value of each DMX-channel can be displayed

•Minimal heatemission

•Maintenance free operation

•Preprogrammed colored macros

•Electronic power supply (100v~240V50/60Hz)

•8 built-in programs accessed via DMX-controller or manually

•Built-in DMX recorder -via the control board or external controller, up to 64 scenes

can be saved and then can be run in Stand Alone or sound activated.

E SPOT LED™

©Elation Professional, Los Angeles Ca. 8www.ElationLighting.com

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in

theatres, etc. Do not attempt operation or installation without a proper knowledge on how to

do so.

This fixture was designed for indoor use only.

Consistent operational breaks may ensure that the fixture will function properly for many

years to come.

Do not shake the fixture around. Avoid brute force when installing or operating the device.

While choosing an installation location, please be sure that the fixture will not be exposed to

extreme heat, moisture or dust. The minimum distance between the fixture and a wall or flat

surface should be at least 0.5 meter (about 1.5ft).

Always install the fixture with an appropriate safety cable. When installing the fixture in a

suspended environment always be sure to use mounting hardware no less than M10 x 25

mm, also be sure the hardware is insert in the pre-arranged screw holes in the base of the

fixture.

When using the quick release “O mega” cam-lock system, be sure the four quick lock

fasteners are locked in the quick lock holes correctly.

Do not attempt to operate this fixture until you have familiarized yourself with its functions.

Do not permit operation by persons not qualified for operating this type of theatrical fixture;

most damages are the result of operations by nonprofessionals.

Please use the original packaging to transport the fixture in for service.

E SPOT LED™

©Elation Professional, Los Angeles Ca. 9www.ElationLighting.com

5. FIXTURE OVERVIEW

1. LEDAssembly

2. LCD Menu Display

3. Mode/Esc Button

4. Up Button

5. Down Button

6. EnterButton

7. Microphone

8. Carrying Handle

9. 3-Pin DMX Output

10. 3-Pin DMX Input

11. 5-Pin DMX Output

12. 5-Pin DMX Input

13. Power Switch

15. Fuse Holder

16. Power Cord

E SPOT LED™

©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com

1. LED–Extremely high optical LED output,Over2,200 lumens from a single chip (White)

2. LED Menu Display-4-segment menu display. Used to display the DMX address as well

as all other menu functions.

3. Mode/Esc Button -This button is used to access the menu functions.

4. Up Button –The up button is used to toggle forward through the menu functions and

settings.

5. Down Button –The down button is used to toggle backwards through the menu

functions and settings.

6. Enter Button –The enter button is used to enter in to a certain menu function or to lock

a function into memory.

7. Microphone–This microphone receives external low frequencies to trigger the unit in

Sound-Active mode. This microphone is designedto receive low frequency sounds only,

tapping on the microphone and high pitch sounds may not trigger the unit.

8. Carrying Handle –Please use this intergraded handled to move the fixture form

location to location. Never carry the fixture by the head.

9. 3-Pin DMX Output Jack –This jack is used to send an incoming DMX signal to the next

fixture in the DMX chain via a female, 3-pin XLR jack.

10. 3-PIN DMX Input Jack –This jack accepts an incoming DMX signal via a male, 3-pin

XLR jack.

11. 5-Pin DMX Output Jack –This jack is used to send an incoming DMX signal to the next

fixture in the DMX chain via a female, 3-pin XLR jack.

Andere Handbücher für E Spot Led

Inhaltsverzeichnis

Andere Elation Scheinwerfer Handbücher

Elation

Elation CUEPIX BLINDER WW2 Bedienungsanleitung

Elation

Elation Opti 30 RGB Bedienungsanleitung

Elation

Elation ELED DW PAR56 Bedienungsanleitung

Elation

Elation Active Scan 250 Bedienungsanleitung

Elation

Elation VISION 575 Bedienungsanleitung

Elation

Elation STAGE SETTER-24 Bedienungsanleitung

Elation

Elation ProTron LED Bedienungsanleitung

Elation

Elation SIXPAR 300IP Bedienungsanleitung

Elation

Elation EVENT BAR Bedienungsanleitung

Elation

Elation DLED Par Zoom Bedienungsanleitung

Elation

Elation Arena Par CW Bedienungsanleitung

Elation

Elation Design LED 108IP Bedienungsanleitung

Elation

Elation DLED 12 BRICK Bedienungsanleitung

Elation

Elation PALADIN Bedienungsanleitung

Elation

Elation Proteus Brutus Bedienungsanleitung

Elation

Elation Design LED 72MKII Bedienungsanleitung

Elation

Elation VISION 250 Bedienungsanleitung

Elation

Elation ELAR EXFLOOD Bedienungsanleitung

Elation

Elation EVC MH LED Bedienungsanleitung

Elation

Elation Waterfall 250 Bedienungsanleitung

Elation

Elation Waterfall 250 Bedienungsanleitung

Elation

Elation Professional SIXPAR 200IP Bedienungsanleitung

Elation

Elation ARENA PAR ZOOM Bedienungsanleitung

Elation

Elation KL FRESNEL 4 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung