Elation POWER SPOT 700CMY II Bedienungsanleitung

Revised 3/25/2008 visage Software version 1.5

POWER SPOT 700CMY II

User Manual

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 2 www.ElationLighting.com

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 3 www.ElationLighting.com

CONTENTS

1. General Information………………………………………………………………………4

a. Introduction……………………………………………………………………….4

b. Unpacking………………………………………………………..…………..….. 4

c. Customer Support…………………………………………….………………… 4

d. Warranty Registration……………………………………………………..…….5

e. Discharge Lamp Warning……………………………………………………… 5

2. Safety Instructions………………………………………………………........…………. 7

3. Features…………………………………………………………………………………...8

4. General Guidelines……………………………………………………………………….9

5. Fixture Overview………………………………………………………………………….11

6. Mounting and Installation………………………………………………………….……. 15

a. Mounting Positions……………………………………………………………… 15

b. Mounting Points………………………………………………………………….16

c. Securing…………………………………………………………………………..17

7. Understanding DMX……………………………………………………………………...18

a. DMX Cable Requirements……..………………………………………………. 18

b. DMX Terminator………………………………………………………………… 19

c. 3-Pin to 5-Pin Conversion……………………………………………………… 20

d. DMX Addressing…………………………………………………………………20

8. Fixture Menu………………………………………………………………………………22

a. Menu functions………………………………………………………………….. 23

9. Operation…………………………………………………………………………………. 34

10. DMX Channel Traits…...….…………………………………………………………….. 36

11. Lamp Installation………………………………………………………………………….43

a. Lamp optimization…………………………………………………..…………...44

12. Fuse Replacement………………………………………………………………………. 46

13. Optical Effects Module………………………………………………………………….. 47

14. Changing / Replacing Gobos & Colors………………………………………………... 50

a. Gobo Patterns…………………………………………………….…………….. 53

15. Animation Wheel………………………………………………………………………… 54

a. Animation Wheel Patterns..……………………………………………………. 56

16. Cleaning and Maintenance……………………………………………………………... 58

17. Warranty………………………………………………………………………………….. 60

18. Photometric Data………………………………………………………………………… 62

19. Dimensional Drawings………………………………………………….………………..63

20. Technical Specifications…………………………………………...………….…………64

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 4 www.ElationLighting.com

INTRODUCTION: Congratulations, you have just purchased one of the most innovative

and reliable lighting fixtures on the market today! The Power Spot 700CMY™, has been

designed to perform reliably for years when the guidelines in this booklet are followed.

Please read and understand the instructions in this manual carefully and thoroughly before

attempting to operate this unit. These instructions contain important information regarding

safety during use and maintenance.

UNPACKING: Thank you for purchasing the Power Spot 700CMY II™ by Elation

Professional®. Every Power Spot 700CMY II™ has been thoroughly tested and has been

shipped in perfect operating condition. Carefully check the shipping carton for damage that

may have occurred during shipping. If the carton appears to be damaged, carefully inspect

your unit for damage and be sure all accessories necessary to operate the unit have

arrived intact. In the event damage has been found or parts are missing, please contact

our customer support team for further instructions. Please do not return this unit to your

dealer without first contacting customer support at the number listed below.

CUSTOMER SUPPORT: Elation Professional® provides a customer support line, to

provide set up help and to answer any question should you encounter problems during

your set up or initial operation. You may also visit us on the web at

www.elationlighting.com for any comments or suggestions. For service related issue

please contact Elation Professional®. Service Hours are Monday through Friday 9:00 a.m.

to 5:00 p.m. Pacific Standard Time.

Voice: (866) 245-6726

Fax: (323) 832-9142

E-mail: [email protected]

Forum: www.ElationLighting.com/forum/

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to

rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself, doing so will void your manufactures warranty.

Please do not discard the shipping carton in the trash. Please recycle whenever possible.

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 5 www.ElationLighting.com

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 6 www.ElationLighting.com

WARRANTY REGISTRATION: The Power Spot 700CMY II™ carries a two-year (730

days) limited warranty. Please fill out the enclosed warranty card to validate your

purchase. All returned service items whether under warranty or not, must be freight pre-

paid and accompany a return authorization (R.A.) number. The R.A. number must be

clearly written on the outside of the return package. A brief description of the problem as

well as the R.A. number must also be written down on a piece of paper and included in the

shipping container. If the unit is under warranty, you must provide a copy of your proof of

purchase invoice. Items returned without a R.A. number clearly marked on the outside of

the package will be refused and returned at customers’ expense. You may obtain a R.A.

number by contacting customer support at (323) 582-3322.

DISCHARGE LAMP WARNING: This fixture is fitted with a

discharge lamp, which is highly susceptible to damage if

improperly handled. Never touch the lamp with your bare

hands, as the oil from your hands will shorten lamp life. Also,

never move the fixture until the lamps have had ample time to

cool. Remember, lamps are not covered under warranty

conditions.

This fixture emits intense UV radiation, which is harmful to the

eyes and skin. The intense luminance of the lamp can cause

severe damage to the retina. Never operate this fixture with the

protective covers removed, these covers have been specially designed to shield against

UV radiation.

Epileptic Warning: Those suffering from epilepsy should avoid looking directly into the

lamp at all times.

Avoid switching the fixture on and off repeatedly in short intervals, as this will reduce lamp

life and intensity.

To achieve the intensity associated with discharge lamps, these lamps use a gas sealed in

a high-pressure environment to emit a brilliant output. Due to the high pressure involved

with the construction of the lamp, the lamp may explode during prolonged extensive use.

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 7 www.ElationLighting.com

This risk is increased with age; added care is encouraged when dealing with older lamps.

Thus, lamp should always be replaced at the end of their recommended duty cycle.

Extreme caution should be used when operated this or any fixture fitted with a gas

discharge lamp.

Never open this fixture while in use!

During the initial operation of this fixture, a light smoke or smell may emit from the interior

of the fixture. This is a normal process and is caused by excess paint in the interior of the

casing burning off from the heat associated with the lamp.

This device falls under protection-class 1. Therefore it is essential that the device be

grounded properly.

Qualified personnel should perform all electrical connections.

Be sure the available voltage matches the voltage requirements of the unit.

Be sure the power cord is never crimped or damaged. If the power cord is damaged,

replace it immediately with a new one of similar power rating.

Always disconnect from main power before performing any type of service or any cleaning

procedure.

Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion

of the cord.

Please be aware that damages caused by modifications to the device are not subject

to warranty.

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 8 www.ElationLighting.com

2. SAFETY INSTRUCTIONS

The Power Spot 700CMY II™ is an extremely sophisticated

piece of electronic equipment. To guarantee a smooth operation,

it is important to follow the guidelines in this manual. The

manufacturer of this device will not accept responsibility for

damages resulting from the misuse of this fixture due to the

disregard of the information printed in this manual.

1. Always be sure that the fan and the air inlets remain clean and are never

blocked. Allow about 6” (15cm) between this fixture and other devices or a wall to

allow for proper cooling.

2. Never touch the fixture during normal operation. This can cause severe

personnel injuries and/or damage to the fixture.

3. Be sure to unplug the POWER SPOT 700CMY II™ from the power outlet before

performing any service related issues.

4. Lamp Replacement; Allow at least 15 minutes after disconnecting main power

before you open the POWER SPOT 700CMY II™. To prevent personal injury,

never touch the lamp if you are not absolutely sure it has cooled.

5. Never look directly into the lamp beam. You risk injury to your retina, which may

induce blindness.

6. Be sure to track and record the lamp running time. The lamp should be changed

at the end of the specified lamp life, regardless of lamp output. You may also

have to change the lamp if it shows any deformations or damage. The same is

with all glass components, color filters, lenses and mirrors.

7. For safe operation, follow the Installation guide described in chapter two of this

manual. Operating the POWER SPOT 700CMY II™ without suited safety aids

such as safety cables or clamps can increase the risk of damage and/or personal

injury.

8. Qualified and certified personnel should only perform installation.

9. When mounting this fixture, use only the original rigging parts included with this

fixture. Any structural modification will void the original manufactures warranty

and may increase the risk of damage and/or personal injury.

10. To reduce the risk of fire or shock, do not expose this unit to rain or moisture.

11. Do not attempt to operate this fixture if the power cord is frayed or damaged.

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 9 www.ElationLighting.com

3. FEATURES

•Pan 530° / Tilt 285°

•3 operation mode: DMX controlled, stand alone or sound activated

•Electronic Power Supply (100v~240v / 50Hz~60Hz)

•Control board with 4-digit display

•Digital display can be turned 180° to fit different installation position

•CMY Subtractive Color Mixing

•Additional Color Wheel: 8 User replaceable colors

•2 Gobo Wheels:

oFixed: 9 plus open

oRotating: 7 User replaceable plus open

•Auto test for all functions

•Automatic Pan/Tilt Correction

•Glass Dichroic Reflector for Even Lamp Output

•Anti-Reflective Coated Lenses

•Brilliant MSR700/2 Lamp (700w, 1000Hrs, 7200K)

•USITT DMX-512 Complaint (3-pin and 5-pin DMX Connections)

•Ethernet Jack for Acrnet Protocol

•Value of each DMX-channel can be displayed

•Uses 24 DMX Channels (16-bit mode)

•Variable Frost Filter for Soft and Hard Edge Spot

•Variable Color Correction Filter

•3-Facet Prism

•Variable Animation Wheel

•User Replaceable Color and Gobos

•Intergraded Tilt Lock System

•Modular Construction

•Variable Zoom: 14˚~32˚ (Beam Angle)

•Motor Driven Focus

•Variable Iris (4%~100%)

Power Spot 700CMY II™

©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com

4. GENERAL GUIDELINES

This fixture is a professional lighting effect designed for use on stage, in nightclubs, in

theatres, etc. Do not attempt operation or installation without a proper knowledge on how

to do so.

This fixture was designed for indoor use only.

Consistent operational breaks may ensure that the fixture will function properly for many

years to come.

Do not shake the fixture around. Avoid brute force when installing or operating the device.

While choosing an installation location, please be sure that the fixture will not be exposed

to extreme heat, moisture or dust. The minimum distance between the fixture and a wall or

flat surface should be at least 0.5 meter (about 1.5ft).

Always install the fixture with an appropriate safety cable. When installing the fixture in a

suspended environment always be to use mounting hardware no less than M10 x 25 mm,

also be sure the hardware is insert in the pre-arranged screw holes in the base of the

fixture.

When using the quick release “Omega” cam-lock system, be sure the four quick lock

fasteners are locked in the quick lock holes correctly, see page 17 for more information on

the proper mounting procedures.

Do not attempt to operate this fixture until you have familiarized yourself with its functions.

Do not permit operation by persons not qualified for operating this type of theatrical fixture;

most damages are the result of operation by person unfamiliar with the operation of this

type of fixture.

If service is ever required, please use the original packaging to transport the fixture in for

service.

Inhaltsverzeichnis

Andere Elation Scheinwerfer Handbücher

Elation

Elation Event Brick W System Bedienungsanleitung

Elation

Elation ELAR EXFLOOD Bedienungsanleitung

Elation

Elation EVC MH LED Bedienungsanleitung

Elation

Elation RAYZOR BEAM 2R Bedienungsanleitung

Elation

Elation VISION 575 Bedienungsanleitung

Elation

Elation VISION 250 Bedienungsanleitung

Elation

Elation Waterfall 250 Bedienungsanleitung

Elation

Elation PAR56 Bedienungsanleitung

Elation

Elation DESIGN PROMO 360 Bedienungsanleitung

Elation

Elation WW PROFILE Bedienungsanleitung

Elation

Elation KL FRESNEL 4 Bedienungsanleitung

Elation

Elation ACL 360 MATRIX Bedienungsanleitung

Elation

Elation VOLT Q5E SIX PACK Bedienungsanleitung

Elation

Elation TVL2000 II Bedienungsanleitung

Elation

Elation Professional SIXPAR 200IP Bedienungsanleitung

Elation

Elation DLED Par Zoom Bedienungsanleitung

Elation

Elation E Spot Led Bedienungsanleitung

Elation

Elation Design LED 108IP Bedienungsanleitung

Elation

Elation Design LED 36MH Bedienungsanleitung

Elation

Elation ELAR EX TRIFLOOD HP Bedienungsanleitung

Elation

Elation ACL PAR 200 Bedienungsanleitung

Elation

Elation Waterfall 250 Bedienungsanleitung

Elation

Elation CUEPIX BLINDER WW2 Bedienungsanleitung

Elation

Elation STAGE SETTER-24 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung