Emerson Rosemount 3814 Programmierhandbuch
Maintenance and Troubleshooting Manual
00809-0100-3814, Rev AB
January2023
Rosemount ™ 3814 Liquid Ultrasonic Flow
Meter
Safety and approval information
This Rosemount product complies with all applicable European directives when properly installed in accordance with
the instructions in this manual. Refer to the EU declaration of conformity for directives that apply to this product. The
EU declaration of conformity, with all applicable European directives, and the complete ATEX Installation Drawings
and Instructions are available on the internet at www.emerson.com or through your local Emerson support center.
Information affixed to equipment that complies with the Pressure Equipment Directive, can be found on the internet
at www.emerson.com.
For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the
user manual. Product data sheets and manuals are available from the Emerson website at www.emerson.com.
Return policy
Follow Emerson procedures when returning equipment. These procedures ensure legal compliance with government
transportation agencies and help provide a safe working environment for Emerson employees. Emerson will not
accept your returned equipment if you fail to follow Emerson procedures. Return procedures and forms are available
on our web support site at www.emerson.com, or by phoning the Emerson Customer Service department.
Emerson Flow customer service
Email:
•Worldwide: [email protected]
•Asia-Pacific: [email protected]
Telephone:
North and South America Europe and Middle East Asia Pacific
United States 800 522 6277 U.K. 0870 240 1978 Australia 800 158 727
Canada +1 303 527 5200 The
Netherlands
+31 (0) 704 136 666 New Zealand 099 128 804
Mexico +41 (0) 41 7686 111 France 0800 917 901 India 800 440 1468
Argentina +54 11 4837 7000 Germany 0800 182 5347 Pakistan 888 550 2682
Brazil +55 15 3413 8000 Italy 8008 77334 China +86 21 2892 9000
Central &
Eastern
+41 (0) 41 7686 111 Japan +81 3 5769 6803
Russia/CIS +7 495 981 9811 South Korea +82 2 3438 4600
Egypt 0800 000 0015 Singapore +65 6 777 8211
Oman 800 70101 Thailand 001 800 441 6426
Qatar 431 0044 Malaysia 800 814 008
Kuwait 663 299 01
South Africa 800 991 390
Saudi Arabia 800 844 9564
UAE 800 0444 0684
2
Contents
Chapter 1 Routine Maintenance................................................................................................ 5
1.1 Meter maintenance.....................................................................................................................5
1.2 Field hydrostatic pressure testing procedures........................................................................6
1.3 Routine maintenance..................................................................................................................7
Chapter 2 Troubleshooting.......................................................................................................13
2.1 Meter status alarms.................................................................................................................. 13
2.2 Troubleshooting the meter......................................................................................................16
2.3 Troubleshoot Maintenance log files and trend files............................................................. 34
2.4 Meter reset mode......................................................................................................................36
Chapter 3 Meter maintenance................................................................................................. 39
3.1 Important safety information..................................................................................................39
3.2 Transducer field removal and installation............................................................................. 42
3.3 Transducer housing removal and installation.......................................................................46
3.4 Transducer cable removal and installation............................................................................55
3.5 Replace the meter electronics................................................................................................. 61
Appendix A Conversion factors...................................................................................................77
A.1 Conversion factors per units of measurement..................................................................... 77
A.2 K-Factor and inverse K-Factor..................................................................................................78
Appendix B Engineering drawings............................................................................................. 79
B.1 Rosemount 3810 Series Ultrasonic Flow Meter Drawings...................................................79
Maintenance and Troubleshooting Manual Contents
00809-0100-3814 January2023
Rosemount 3814 Liquid Ultrasonic Flow Meter 3
Contents Maintenance and Troubleshooting Manual
January2023 00809-0100-3814
4 Emerson.com/Rosemount
1 Routine Maintenance
1.1 Meter maintenance
This section includes discussion of the maintenance of Rosemount 3814 Liquid
Ultrasonic Flow Meters.
For reference, you may download the MeterLink Quick Start Manual from:
www.emerson.com/meterlink
CAUTION
SURFACE TEMPERATURE HAZARD
Meter body and piping may be extremely hot or cold.
Wear appropriate personal protective equipment when coming in contact with
the meter.
Failure to comply may result in injury.
CAUTION
TRANSPORTATION HAZARD
When moving the meter, do not insert the forks of a forklift into the bore.
Inserting the forks may cause the meter to become unstable, resulting in injury to
personnel or damage to the bore and sealing face.
NOTICE
Prior to lifting the unit, refer to the flow meter nameplate or outline dimensional
(general arrangement) drawing for the assembled weight.
CAUTION
TRIPPING HAZARD
Clear all obstacles or obstructions from the work area when transporting,
installing or removing the meter.
Failure to comply may cause injury to personnel.
Maintenance and Troubleshooting Manual Routine Maintenance
00809-0100-3814 January2023
Rosemount 3814 Liquid Ultrasonic Flow Meter 5
WARNING
CRUSHING HAZARD
Do not remove flange stabilizers.
Attempting to do so may allow the meter to roll, resulting in serious injury or
equipment damage.
Figure 1-1: Flange stabilizers
A. Flange stabilizers
CAUTION
ESCAPING FLUIDS HAZARD
The purchaser of the meter is responsible for the selection of Emerson
components/seals and materials compatible with the chemical properties of the
measurement fluid.
Failure to select suitable meter components/seals may cause escaping fluids,
resulting in injury to personnel or equipment damage.
1.2 Field hydrostatic pressure testing
procedures
The Rosemount 3814 Liquid Ultrasonic Flow Meter can be hydro-tested without
any special preparations. The transducers are not exposed to the process
pressure and can remain installed in the meter.
Routine Maintenance Maintenance and Troubleshooting Manual
January2023 00809-0100-3814
6 Emerson.com/Rosemount
The liquid ultrasonic meter pressure containing parts include but are not limited
to the transducer housings. These pressure containing parts are pressure tested
while attached to the meter body as a completed ultrasonic meter assembly. The
hydrostatic test is verification of the pressure containing capability of the liquid
ultrasonic meter pressure containing parts and the seals that seal them.
CAUTION
LEAKAGE OR PRESSURE CONTAINING PARTS FAILURE
Use precautions to eliminate hazards to personnel in the event of leakage or
failure of the liquid ultrasonic meter pressure containing parts or failure of the
test equipment and to prevent over-pressurization during the test procedure.
Failure to comply may result in injury to personnel or cause damage to the
equipment.
1.3 Routine maintenance
Routine maintenance operations requires adherence to all applicable regulations
and laws and safety training for personnel to perform the maintenance
operations. Review your organization’s best practices procedures before
performing routine maintenance.
1.3.1 Maintenance logs and reports
To monitor the performance health of the meter, and ensure it is operating within
acceptable specifications, routine diagnostics should be performed. Collecting a
maintenance log gives you a snapshot of the current health of the meter and
you can compare the inspection reports from previously saved logs. Use the Logs/
Reports menu and click Maintenance Logs and Reports. MeterLink displays the
Maintenance Logs and Reports dialog. Choose the time duration, log format and
collection rate for the output file and click the Start button. You can open the file
immediately after it is generated or view it at a later time. It is recommended that
a Maintenance log be collected after an upset in the system.
In establishing a baseline to be used for the trending of the meter diagnostics,
it is very helpful if a set of log files are collected immediately after the meter
has been installed in the field. Preferably, collect the log files at several velocities
within the operating range of the meter. This helps establish that the flow profile
is relatively constant throughout the meters operating range (except velocities
below 3 ft/sec where the profile may vary).
Maintenance and Troubleshooting Manual Routine Maintenance
00809-0100-3814 January2023
Rosemount 3814 Liquid Ultrasonic Flow Meter 7
Maintenance log collection
Figure 1-2: Maintenance log collection parameters
Trend maintenance log collection
Merging the results of two or more Maintenance logs into a single file, allows
you to build a historical database of the meter’s performance. Trending the
logs indicates changes from the original installation of the meter, or over time.
Looking at a single inspection report, that is either collected monthly or quarterly,
can give you an indication of the meter's health.
Routine Maintenance Maintenance and Troubleshooting Manual
January2023 00809-0100-3814
8 Emerson.com/Rosemount
Figure 1-3: Trend log collection
This is important since many diagnostics change slowly over time. Trending the
maintenance logs helps identify these changes and makes problems much more
obvious than merely viewing a single inspection report. The Trending feature
is integral to MeterLink which allows all important parameters to be trended.
MeterLink supports trending files in a Microsoft® Excel® workbook from multiple
3814 meter maintenance logs. Some parameters like gain, signal level, and noise
level may show a shift over time which can be useful in detecting changes in the
meter and the installation.
Maintenance logs or Trend files to be trended must all have matching column
headings. This means the logs must be in the same units (i.e. U.S. Customary or
Metric), must have the same pressure type (i.e. gauge or absolute), and must have
the same time base (1/second, 1/minute, 1/hour, 1/day). If not, an error message
will be displayed stating the column headings do not match and the file will not be
added to the Workbook to trend list.
Archive log collection
Archive logs that may be collected and the options include:
•Daily log - generated every 24 hours on the Contract Hour.
•Hourly log - generated every hour at the top of the hour.
•Event log - collects the alarm and event log records.
Maintenance and Troubleshooting Manual Routine Maintenance
00809-0100-3814 January2023
Rosemount 3814 Liquid Ultrasonic Flow Meter 9
Figure 1-4: Archive log collection parameters
The logs may be collected in a single file or you can choose to collect one type of
log. Each of the Meter Archive logs include the Meter Configuration file.
Routine Maintenance Maintenance and Troubleshooting Manual
January2023 00809-0100-3814
10 Emerson.com/Rosemount
Andere Handbücher für Rosemount 3814
1
Inhaltsverzeichnis
Andere Emerson Messgerät Handbücher
Emerson
Emerson 2130 RBM Consultant Pro Bedienungsanleitung
Emerson
Emerson Rosemount 3051S Series Bedienungsanleitung
Emerson
Emerson Micro Motion 782791**B Series Bedienungsanleitung
Emerson
Emerson Daniel Senior Orifice Fitting Series Bedienungsanleitung
Emerson
Emerson Rosemount OPM3000 Bedienungsanleitung
Emerson
Emerson Klauke UAP432CFM Bedienungsanleitung
Emerson
Emerson daniel 1500 series Bedienungsanleitung
Emerson
Emerson Rosemount 3051 Bedienungsanleitung
Emerson
Emerson Rosemount 3410 Series Bedienungsanleitung
Emerson
Emerson Rosemount Clarity II T56 Bedienungsanleitung
Emerson
Emerson R&S SGT100A Bedienungsanleitung
Emerson
Emerson FB2100 Bedienungsanleitung
Emerson
Emerson Rosemount Analytical 400A Bedienungsanleitung
Emerson
Emerson Rosemount Analytical 385+ Bedienungsanleitung
Emerson
Emerson Rosemount 3812 Bedienungsanleitung
Emerson
Emerson Micro Motion TA Series Bedienungsanleitung
Emerson
Emerson Micro Motion 7829 Visconic Series Betriebshandbuch
Emerson
Emerson Rosemount 2051CF series Bedienungsanleitung
Emerson
Emerson FloBoss 103 Kurzanleitung
Emerson
Emerson TopWorx 4310 Bedienungsanleitung
