Endress+Hauser Indumax CLS54 Bedienungsanleitung

Products Solutions Services

Operating Instructions

Indumax CLS54

Conductivity sensor

BA01591C/07/EN/03.17

71377428

AUTHORIZED DISTRIBUTOR:

InstrumentsAndControl.com

Houston, Texas USA

sales@InstrumentsAndControl.com

281-609-7170

EU declaration of conformity Indumax CLS54

2 Endress+Hauser

EU declaration of conformity

Indumax CLS54 Table of contents

Endress+Hauser 3

Table of contents

1 Document information ......... 4

1.1 Warnings ........................... 4

1.2 Symbols used ........................ 4

1.3 Symbols on the device ................ 5

2 Basic safety instructions ....... 6

2.1 Requirements for the personnel ........ 6

2.2 Designated use ...................... 6

2.3 Occupational safety .................. 6

2.4 Operational safety ................... 7

2.5 Product safety ....................... 7

3 Incoming acceptance and

product identification .......... 8

3.1 Incoming acceptance ................. 8

3.2 Scope of delivery ..................... 8

3.3 Product identification ................. 9

3.4 Certificates and approvals ............ 10

4 Installation .................... 11

4.1 Installation conditions ............... 11

4.2 Installing the sensor ................. 14

4.3 Dimensions ........................ 15

4.4 Post-installation check ............... 17

5 Electrical connection .......... 18

5.1 Connection conditions ............... 18

5.2 Connecting to the transmitter ......... 19

5.3 Ensuring the degree of protection ..... 19

5.4 Post-connection check ............... 20

6 Maintenance .................. 20

7 Repairs ......................... 21

7.1 Return ............................ 21

7.2 Disposal ........................... 21

8 Accessories .................... 21

8.1 Cable extension ..................... 21

8.2 Calibration solutions ................ 22

9 Technical data ................. 22

Index ................................. 26

Document information Indumax CLS54

4 Endress+Hauser

1 Document information

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of non-

compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols used

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

Indumax CLS54 Document information

Endress+Hauser 5

1.3 Symbols on the device

Symbol Meaning

Reference to device documentation

Basic safety instructions Indumax CLS54

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance of the measuring system may be

carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Designated use

Indumax CLS54 is designed for the inductive measurement of the conductivity of liquids. The

sensor is particularly suitable for use in hygienic applications in the food, beverage,

pharmaceutical and biotech industry.

Use with Liquiline CM42, and Liquisys CLM223/253 transmitters; part of the Smartec

CLD134 measuring system.

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Occupational safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

• Regulations for explosion protection

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable European standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

Indumax CLS54 Basic safety instructions

Endress+Hauser 7

2.4 Operational safety

1. Before commissioning the entire measuring point, verify that all connections are

correct. Ensure that electrical cables and hose connections are undamaged.

2. Do not operate damaged products, and safeguard them to ensure that they are not

operated inadvertently. Label the damaged product as defective.

3. If faults cannot be rectified:

Take the products out of operation and safeguard them to ensure that they are not

operated inadvertently.

2.5 Product safety

2.5.1 State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

2.5.2 Electrical equipment in hazardous areas

The sensor may be connected to the following transmitters:

• Liquiline M CM42, EC type-examination certificates TÜV 13 ATEX 7459 X, TÜV 14 ATEX

7510 X, TÜV 14 ATEX 7509 X, EX5 05 03 30266 012

• Mycom S CLM153-G, EC type-examination certificate DMT 01 ATEX E 174

CLS54-G****** and CLS54-K******

• The sensor has been developed and manufactured in accordance with the applicable

European standards and guidelines and is suitable for use in hazardous areas.

• The Declaration of Conformity confirms compliance with the harmonized European

standards for using the sensor in hazardous areas and is included in the Operating

Instructions.

• The sensor must be connected and operated in accordance with the associated Operation

Instructions. All sensor operating data must be observed.

• Ensure that it is professionally installed in order to achieve the degree of protection (IP65)

for the housing. Use the original seal, and install the cable entry properly.

• Compliance with the specified ambient and process temperature ranges is a prerequisite for

safe use of the device!

• The sensors may only be used in liquid media with a conductivity >10 nS/cm.

• To avoid electrostatic charges, all CLS54 versions with metal surfaces (depends on process

connection) must be electrostatically connected in such a way that R ≤1 MΩ.

• The maximum permitted length of the measuring cable is 50 m.

• Full compliance with regulations for electrical systems in hazardous areas (EN 60079-14) is

mandatory when using the devices and sensors.

Incoming acceptance and product identification Indumax CLS54

8 Endress+Hauser

Temperature classes

Temperature class Ambient temperature range TaMedium temperature range Tmed

T6 -20 °C to +60 °C -10 °C ≤ Tmed ≤ + 55 °C

T4 -10 °C ≤ Tmed ≤ + 105 °C

T3 -10 °C ≤ Tmed ≤ + 125 °C 1)

1) 150 °C for maximum 60 min

Sensors with CSA approval (CLS504-O******)

Observe the documentation and the control drawings of the transmitter.

3 Incoming acceptance and product identification

3.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify your supplier of any damage to the packaging.

Keep the damaged packaging until the matter has been settled.

2. Verify that the contents are undamaged.

 Notify your supplier of any damage to the delivery contents.

Keep the damaged products until the matter has been settled.

3. Check the delivery for completeness.

 Check it against the delivery papers and your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

The permitted ambient conditions must be observed (see "Technical data").

If you have any questions, please contact your supplier or your local sales center.

3.2 Scope of delivery

The scope of delivery includes:

• Sensor in the version ordered

• Operating Instructions

Indumax CLS54 Incoming acceptance and product identification

Endress+Hauser 9

3.3 Product identification

3.3.1 Type code for versions with explosion protection

Name Type Version

Indumax CLS54 - G xxx x x x + x

for use in hazardous areas, ATEX II 1G

Ex ia IIC T3/T4/T6 Ga

Process connections, additional options,

cable connection, temperature sensor,

identification

No Ex relevance

Name Type Version

Indumax CLS54 - O xxx x x x + x

For use in hazardous areas, CSA IS NI

Cl.I Div.1&2,Gr. A-D

Process connections, additional options,

cable connection, temperature sensor,

identification

No Ex relevance

Name Type Version

Indumax CLS54 - K xxx x x x + x

For use in hazardous areas, EAC Ex, 0Ex

ia IIC T6/T4 Ga X

Process connections, additional options,

cable connection, temperature sensor,

identification

No Ex relevance

3.3.2 Nameplate

The nameplate can be found on the sensor.

The following information is provided on the nameplate:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Cell constant (nominal value)

• Protection class

• Pressure specification at 20 °C

• Continuous service temperature

Compare the data on the nameplate with your order.

3.3.3 Product identification

Product page

www.endress.com/cls54

Incoming acceptance and product identification Indumax CLS54

10 Endress+Hauser

Interpreting the order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to the product page for your product on the Internet.

2. At the bottom of the page, click the link Online Tools and then select Access device

specific information.

 An additional window opens.

3. Enter the order code from the nameplate into the search field and then select Show

details.

 You will receive information on each feature (selected option) of the order code.

Manufacturer's address

Endress+Hauser Conducta GmbH+Co. KG

Dieselstraße 24

D-70839 Gerlingen

3.4 Certificates and approvals

3.4.1 Hygiene

FDA

All materials in contact with the product are listed by the FDA.

EHEDG

Certified cleanability according to EHEDG TYPE EL-class I.

When using the sensor in hygienic applications, please note that the cleanability of the

sensor also depends on the way the sensor is installed. To install the sensor in a pipe, use

the appropriate and EHEDG-certified flow vessels for the particular process connection.

3-A

Certified according to 3-A Standard 74- ("3-A Sanitary Standards for Sensor and Sensor

Fittings and Connections Used on Milk and Milk Products Equipment").

Biological reactivity (USP class VI) (option)

Biological reactivity test certificate (Certificate of Compliance) according to USP (United States

Pharmacopoeia) part<87> and part <88> class VI with lot number traceability of materials in

contact with the medium.

Inhaltsverzeichnis

Andere Endress+Hauser Zubehör Handbücher

Endress+Hauser

Endress+Hauser Deltapilot S FMB70 Montageanleitung

Endress+Hauser

Endress+Hauser Proline 200 PROFIBUS PA Technische Daten

Endress+Hauser

Endress+Hauser Proline 800 Technische Daten

Endress+Hauser

Endress+Hauser Waterpilot FMX21 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar S FMD 77 Handbuch

Endress+Hauser

Endress+Hauser Memosens COS81D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Oxymax COS22D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Memosens COS81E Technische Daten

Endress+Hauser

Endress+Hauser Liquiphant Bedienungsanleitung

Endress+Hauser

Endress+Hauser CCS240 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivector FTI26 Technische Daten

Endress+Hauser

Endress+Hauser Micropilot M FMR230 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline 200 FOUNDATION Fieldbus Technische Daten

Endress+Hauser

Endress+Hauser Memosens COL37E Bedienungsanleitung

Endress+Hauser

Endress+Hauser Oxymax COS22D Technische Daten

Endress+Hauser

Endress+Hauser Oxymax W COS51D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Dipfit W CLA111 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline 800 Technische Daten

Endress+Hauser

Endress+Hauser Deltabar FMD71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser OUSAF44 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Oxymax COS61 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag H Technische Daten

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung