Endress+Hauser Oxymax COS61 Handbuch

TI00387C/07/EN/13.12

71162643

Technical Information

Oxymax COS61/ COS61D

Dissolved oxygen measurement

Optical sensor acc. to the fluorescence quenching principle, with or

without Memosens protocol

Application

The continuous measurement of the dissolved oxygen

concentration is very important in many areas of water

management:

• Sewage treatment plants:Oxygen measurement and

regulation in the activated sludge basin for a highly efficient

biological cleaning process

• Water monitoring:

Oxygen measurement in rivers, lakes or seas as an indicator of

the water quality

• Water treatment:

Oxygen measurement for status monitoring of drinking water

for example (oxygen enrichment, corrosion protection etc.)

• Fish farming:

Oxygen measurement and regulation for optimum living and

growth conditions

Your benefits

• Optical technology:

– Minimum maintenance

– Maximum availability

• Sensor with digital signal processing:

– Calibration data saved in sensor

– High degree of EMC protection thanks to digital

communication with the transmitter

• Extended maintenance intervals and a high degree of long-

term stability

• Intelligent self-monitoring guarantees reliable measured

values

• No flow needed - measurement possible in still water

• COS61D - the Liquiline sensor

– Plug&Play:

Safe communication based on Memosens protocol

– Optionally with M12 plug for fast connection to the

transmitter

• COS61 - the Liquisys sensor

– Compatible with tried-and-tested COS31 with

COM2x3W:

Easy measuring point changeover to optical technology

– Compatible with COS41 with COM2x3D with conversion

kit

Oxymax COS61/COS61D

2Endress+Hauser

Function and system design

Measuring principle • Sensor design:

– Oxygen-sensitive molecules (markers) are integrated in an optically active layer (fluorescence layer).

– The surface of the fluorescence layer is in contact with the medium.

– The sensor optics are directed at the underside of the fluorescence layer.

• There is an equilibrium between the oxygen partial pressure in the medium and that in the fluorescence

layer:

– If the sensor is immersed in the medium, the equilibrium is established very quickly.

• Measuring process:

– The sensor optics send green light pulses to the fluorescence layer.

– The markers "answer" (fluoresce) with red light pulses.

– The duration and intensity of the response signals is directly dependent on the oxygen contents and the

partial pressure.

– If the medium is free from oxygen, the response signals are long and very intense.

– Oxygen molecules quench the marker molecules. As a result, the response signals are shorter and less

intense.

• Measurement result:

– The sensor returns a signal that is in proportion to the oxygen concentration in the medium.

– The medium temperature and air pressure are already taken into account calculated in the sensor.

– In addition to the standard values of concentration, saturation index and partial pressure, the sensor also

returns a raw measured value in μs. The value corresponds to the decay time of the fluorescence and is

approx. 20 μs in air, and approx. 60 μs in media free from oxygen.

Sensor monitoring The optical signals are continuously monitored and analyzed for plausibility.

If inconsistencies occur, an error message is output via the transmitter.

Ageing of the sensor cap is detected. The transmitter first displays a warning for predictive maintenance and

later generates an error message.

In addition, the following fault conditions are detected in conjunction with the sensor check system of the

transmitter:

• Implausibly high or low measured values

• Disturbed regulation due to incorrect measured values

Oxymax COS61/COS61D

Endress+Hauser 3

Measuring system COS61D

A complete measuring system comprises:

• Oxygen sensor Oxymax COS61D

• Multi-channel transmitter Liquiline CM44x

• Sensor cable, optionally with M12 plug

• Assembly, e.g. COA250 flow assembly, CYA112 immersion assembly or COA451 retractable assembly

Optional:

• CYH112 assembly holder for immersion operation

• RM junction box (for cable extension)

• Cleaning system

a0012882

Measuring system (example)

Sensor cable

Transmitter Liquiline CM44x

Flexdip CYH112

Basin rim with rail

Oxygen sensor Oxymax COS61D

Flexdip CYA112

Oxymax COS61/COS61D

4Endress+Hauser

COS61

A complete measuring system comprises:

• Oxygen sensor Oxymax COS61

• Transmitter, e.g. Liquisys COM2x3-W

• Special measuring cable

• Assembly, e.g. COA250 flow assembly, CYA112 immersion assembly or COA451 retractable assembly

Optional:

• CYH112 assembly holder for immersion operation

• VS junction box (for cable extension)

• Cleaning system

Input

Measured variable Dissolved oxygen [mg/l, % SAT, hPa]

Temperature [˚C, ˚F]

Measuring range With Liquisys COM 2x3-W or Liquiline CM44x:

0 to 20 mg/l (0 to 20 ppm)

0 to 200 % SAT

0 to 400 hPa

a0012885

Measuring system (example)

Liquisys COM253 transmitter

COS61 oxygen sensor

Pipework (ascending pipe)

Medium flow direction

Retractable assembly Cleanfit COA451

Sensor cable

Oxymax COS61/COS61D

Endress+Hauser 5

Power supply

Electrical connection COS61D

Connection methods

• Sensor cable directly connected to the terminal connector of the basic module

• Optional: Sensor cable plug connected to the M12 sensor socket on the underside of the device. With this

type of connection, the device is already wired at the factory.

COS61 connected to field device

Connect the sensor directly to the transmitter by using the special measuring cable with SXP plug.

COS61 connected to panel mounting device

• Remove the SXP connector (transmitter side!) from the cable.

• Refer to the following table for the cable assignment and the assigned terminals for Liquisys COM223-WX/

WS.

• Please note that the cable assignment varies depending on the sensor version (fixed cable or TOP68

connection).

a0013305

Sensor cable with terminated cable cores

a0004118

SXP plug

Terminal

COM223

Sensor with fixed cable (OMK) Sensor with TOP68 connection

(CYK71)

Core Assignment Core Assignment

87 YE +UBYE +UB

0GY0V WH0V

96 PK Com. (digital) GN Communication (digital)

97 BU Com. (digital) BN Communication (digital)

88 BN –UBKoax innen –UB

Oxymax COS61/COS61D

6Endress+Hauser

Installation conditions

Installation instructions Retractable assembly COA451

Wastewater assembly CYA112

Flow assembly COA250

a0013009

Installation with retractable assembly

Arrow 1 shows the flow direction.

The installation angle αmust not exceed 90˚.

The recommended installation angle is 75˚.

The optical windows of the sensor have to be aligned parallel to

the flow direction (α= 90˚) or face the flow direction (α<90˚).

For manual insertion/retraction of the assembly the medium

pressure may not exceed 2 bar (29 psi).

a0013010

Installation with wastewater assembly

The arrow shows the flow direction.

The installation angle is 45˚(recommended) or 90˚.

If you use the sensor in open basins, install the sensor in a way

no bubbles can build up around the optical windows.

If you use the sensor in strong aerated basins install the sensor

in an installation angle of 90˚to minimize the influence of

bubbles.

a0013319

Flow assembly

The arrow on the assembly shows the flow direction.

Oxymax COS61/COS61D

Endress+Hauser 7

Environment

Ambient temperature range –20 to +60 ˚C (0 to 140 ˚F)

Storage temperature –20 to +70 ˚C (0 to 160 ˚F)

at 95% relative humidity, non condensing

Ingress protection COS61D

• Fixed cable with terminated cable cores:

IP 68 (test conditions: 10 m (33 ft) water column at 20 ˚C (68 ˚F) in 7 days)

• Fixed cable with M12 plug:

IP 68 (test conditions: 1 m (3.3 ft) water column, 3N KCl at 50 ˚C (122 ˚F) in 30 days)

COS61

• Fixed cable versions:

IP 68 (test conditions: 10 m (33 ft) water column at 25 ˚C (77 ˚F) in 30 days)

• Top 68 plug-in head versions:

IP 68 (test conditions: 1 m (3.3 ft) water column at 50 ˚C (122 ˚F) in 7 days)

Process

Process temperature –5 to 60 ˚C (20 to 140 ˚F)

Process pressure max. 10 bar (145 psi) abs.

Performance characteristics

Response time t90 t90: 60 s

Maximum measured error1) COS61D

0.01 mg/l or ±1 % of measured value (< 12 mg/l)

±2 % of measured value (from 12 to 20 mg/l)

COS61

0.02 mg/l or ±1 % of measured value (< 12 mg/l)

±2 % of measured value (from 12 to 20 mg/l)

Repeatability ±0.5 % of measuring range end

Life time of the sensor cap >2 years (under reference operating conditions, protect against direct sun light)

1) at 20 °C (68 °F)

Oxymax COS61/COS61D

8Endress+Hauser

Mechanical construction

Design, dimensions COS61D

Design, dimensions COS61

a0013311

With optional M12 plug

a0013312

With optional cleaning unit

* depending on cleaning unit version

a0004083-en

Fixed cable version

a0004084-en

TOP68 version

Oxymax COS61/COS61D

Endress+Hauser 9

Optional cleaning unit

Weight With cable length 7 m (23 ft): 0.7 kg (1.5 lbs.)

With cable length 15 m (49 ft): 1.1 kg (2.4 lbs.)

With TOP68 plug-in connection: 0.3 kg (0.66 lbs.)

Materials

Process connection COS61D

G1, NPT 3/4"

COS61

Sensor cable COS61D

shielded 4-core fixed cable

COS61

shielded 7-core fixed cable or double-shielded coaxial cable with 4 pilot wires (with TOP68 plug connection)

Cable entry at transmitter COS61D

• Terminal connection

• optional: M12 plug

COS61

• SXP plug (field device)

• Terminal connection (panel mounted device)

Cable specification max. 100 m (330 ft, (including cable extension))

Temperature compensation internal

Interface COS61D

Memosens protocol

COS61

RS 485

a0013314

Optional cleaning unit

Sensor shaft:

Cap with fluorescence layer:

Fluorescence layer:

stainless steel 1.4571 (AISI 316Ti)

POM

Silicone

Oxymax COS61/COS61D

10 Endress+Hauser

Certificates and approvals

EMC compatibility COS61D

Interference emission and interference immunity complies with EN 61326: 2005, Namur NE 21:2007

COS61

Interference emission and interference immunity complies with EN 61326: 1997 / A1: 1998

Ordering information

Product page You can create a complete and valid order code by using the configurator on the internet product page.

Product page link:

www.products.endress.com/cos61

www.products.endress.com/cos61d

Product configurator 1. You can choose from the following options on the product page located on the right:

2. Click "Configure this product".

3. The configurator opens in a separate window. You can now configure your device and receive the

complete order code that applies for the device.

4. Afterwards, export the order code as a PDF or Excel file. To do so, click the appropriate button at the top

of the page.

Scope of delivery The scope of delivery comprises:

• Oxygen sensor with transport protection cap or with mounted cleaning unit

• Operating Instructions, English

Accessories

Assemblies (selection) Wastewater assembly Flexdip CYA112

• Modular assembly system for sensors in open basins, channels and tanks

• Versions in stainless steel or PVC

• Ordering per product structure (--> Online configurator, www.products.endress.com/cya112)

• Technical Information TI00432C/07/EN

Flow assembly COA250

• for sensor installation in pipe lines, PVC

• ordering acc. to product structure (Technical Information TI111C/07/en)

Retractable assembly Cleanfit COA451

• manually driven retractable assembly, stainless steel, with ball valve, for oxygen sensors;

• ordering acc. to product structure (Technical Information TI368C/07/en)

Assembly holder Holder system Flexdip CYH112 for water and wastewater assembly Flexdip CYA112

• Modular holder system for sensors and assemblies in open basins, channels and tanks

• The holder system CYH112 works for nearly any type of fixing - fixing on the floor, wall or directly on a rail.

• Material: stainless steel

• Ordering acc. to product structure (Technical Information TI430C/07/en)

Andere Handbücher für Oxymax COS61

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Endress+Hauser Zubehör Handbücher

Endress+Hauser

Endress+Hauser OUSAF44 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag Bedienungsanleitung

Endress+Hauser

Endress+Hauser CCS120 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquipoint T Series Handbuch

Endress+Hauser

Endress+Hauser NAR 300 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Oxymax H COS21 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Chloromax CCS142D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Oxymax COS22D Bedienungsanleitung

Endress+Hauser

Endress+Hauser CCS140 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CCS50D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Turbimax CUS51D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Turbimax W CUS65 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit P CPA472D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Turbimax CUS50D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow P Technische Daten

Endress+Hauser

Endress+Hauser Turbimax CUS71D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Oxymax H COS21D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Turbimax W CUS31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Solitrend MMP42 Technische Daten

Endress+Hauser

Endress+Hauser Prosonic S Series Handbuch

Endress+Hauser

Endress+Hauser Oxymax W COS71 Handbuch

Endress+Hauser

Endress+Hauser Liquiphant M FTL51C Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit P CPA472 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung