Endress+Hauser CYR52 Bedienungsanleitung

Products Solutions Services

Operating Instructions

CYR52

Ultrasonic cleaning

BA01300C/07/EN/03.22-00

71569939

2022-04-15

CYR52 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ........... 4

1.1 Warnings ........................... 4

1.2 Symbols used ........................ 4

2 Basic safety instructions ....... 5

2.1 Requirements for the personnel ........ 5

2.2 Intended use ........................ 5

2.3 Workplace safety .................... 5

2.4 Operational safety ................... 5

2.5 Product safety ....................... 6

3 Product description ............. 7

3.1 Product design ....................... 7

4 Incoming acceptance and

product identification ......... 10

4.1 Incoming acceptance ................ 10

4.2 Product identification ................ 10

4.3 Scope of delivery .................... 11

5 Mounting ...................... 12

5.1 Mounting requirements .............. 12

5.2 Mounting the ultrasonic transducer .... 17

5.3 Mounting the ultrasonic generator .... 18

5.4 Post-mounting check ................ 21

6 Electrical connection .......... 22

6.1 Connecting the device ............... 22

6.2 Post-connection check ............... 23

7 Commissioning ................ 24

7.1 Function check ..................... 24

7.2 Configuration management .......... 24

8 Diagnostics and

troubleshooting ............... 25

8.1 General troubleshooting ............. 25

9 Maintenance .................. 26

9.1 Cleaning ........................... 26

10 Repair .......................... 27

10.1 General information ................. 27

10.2 Spare parts ........................ 27

10.3 Return ............................ 27

10.4 Disposal ........................... 27

11 Accessories .................... 28

12 Technical data ................. 29

12.1 Output ............................ 29

12.2 Power supply ....................... 29

12.3 Environment ....................... 29

12.4 Mechanical construction ............. 29

Index ................................. 31

About this document CYR52

4 Endress+Hauser

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of non-

compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols used

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

CYR52 Basic safety instructions

Endress+Hauser 5

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance must only be carried out by

technical personnel trained to perform these tasks.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Faults may be repaired only by authorized and specially trained personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Intended use

The CYR52 ultrasonic cleaning system is used to clean turbidity sensors in liquids that are

installed in pipes.

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Workplace safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable international standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

Basic safety instructions CYR52

6 Endress+Hauser

2.5 Product safety

2.5.1 State-of-the-art technology

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

international standards have been observed.

CYR52 Product description

Endress+Hauser 7

3 Product description

3.1 Product design

3.1.1 Measuring system

A complete measuring system comprises:

• Ultrasonic generator

• Ultrasonic transducer

• Assembly or pipe with turbidity sensor

• Liquiline CM44x transmitter

124

A0038480

 1 Ultrasonic cleaning with Flowfit CUA252 assembly

1 Liquiline CM44x transmitter

2 Ultrasonic generator

3 Flowfit CUA252 flow assembly

4 Clamp connection for turbidity sensor

5 Ultrasonic transducer

6 Power supply cable for ultrasonic transducer

7 Mains voltage cable for ultrasonic generator

8 Control cable

9 Mains voltage cable for transmitter

Product description CYR52

8 Endress+Hauser

3.1.2 Ultrasonic transducer with Flowfit CUA252 flow assembly

A0039566

 2 Ultrasonic transducer on Flowfit CUA252 assembly

3.1.3 Ultrasonic transducer with Flowfit CUA262 flow assembly

A0039567

 3 Ultrasonic transducer on Flowfit CUA262 assembly

CYR52 Product description

Endress+Hauser 9

3.1.4 Ultrasonic transducer with assembly of CUS31

A0039571

 4 Ultrasonic transducer with assembly of CUS31

3.1.5 Ultrasonic transducer on pipe

A0039569

 5 Ultrasonic transducer mounted on pipe

Incoming acceptance and product identification CYR52

10 Endress+Hauser

4 Incoming acceptance and product identification

4.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

4.2 Product identification

4.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Safety information and warnings

‣Compare the information on the nameplate with the order.

4.2.2 Product identification

Product page

www.endress.com/cyr52

Order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to www.endress.com.

2. Page search (magnifying glass symbol): Enter valid serial number.

Andere Handbücher für CYR52

Inhaltsverzeichnis

Andere Endress+Hauser Industrieanlagen Handbücher

Endress+Hauser

Endress+Hauser Cleanfit CPA871 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Kit CSF48 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prothermo NMT 539 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Teqwave F/I Technische Daten

Endress+Hauser

Endress+Hauser Cleanfit P CPA471 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proservo NMS83 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Stamoclean CAT430 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Hart Proline Promag P 500 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Liquistation CSF39 Technische Daten

Endress+Hauser

Endress+Hauser Liquistation CSF48 Technische Daten

Endress+Hauser

Endress+Hauser Tankvision Multi Scan NXA83 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prothermo NMT 539 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Flexdip CYA112 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant M/S FTL5 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Tankvision Multi Scan NXA83 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar S PMD75 Bedienerhandbuch

Endress+Hauser

Endress+Hauser T13 Handbuch

Endress+Hauser

Endress+Hauser Analytik Jena CyBio Well vario Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline Control CDC90 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FieldEdge SGC500 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 300 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Soliwave FDR16 Technische Daten

Endress+Hauser

Endress+Hauser Liquiline System CA80PH Technische Daten

Endress+Hauser

Endress+Hauser Proline t-mass 300 Bedienerhandbuch

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung