Endress+Hauser Tankvision Multi Scan NXA83 Bedienungsanleitung

Products Solutions Services

BA01288G/00/EN/01.14

71244020

Valid as of software version:

3.0.10

Operating Instructions

Tankvision

Multi Scan NXA83

Local display Operation manual

Tankvision

2Endress+Hauser

Table of Contents

1 Document information . . . . . . . . . . . . . . 3

1.1 Target audience for this manual . . . . . . . . . . . . . . . 3

1.2 Version history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Document function . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Basic safety instructions . . . . . . . . . . . . 5

2.1 Requirements for the personnel . . . . . . . . . . . . . . . 5

2.2 IT security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.3 Designated use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.4 Workplace safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.5 Operational safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.6 Product safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Identification . . . . . . . . . . . . . . . . . . . . . . 7

3.1 Product identification . . . . . . . . . . . . . . . . . . . . . . . . 7

3.2 Nameplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.3 Order code and device version . . . . . . . . . . . . . . . . . 8

3.4 Registered trademarks . . . . . . . . . . . . . . . . . . . . . . . 8

4 Introduction . . . . . . . . . . . . . . . . . . . . . . . 9

5 Operation . . . . . . . . . . . . . . . . . . . . . . . . 10

5.1 Starting and Stopping . . . . . . . . . . . . . . . . . . . . . . 10

5.2 Status Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.3 Display Navigation . . . . . . . . . . . . . . . . . . . . . . . . 11

5.4 Grid View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5.5 Single Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5.6 Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.7 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

5.8 Scheduling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.9 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

6 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Tankvision Document information

Endress+Hauser 3

1 Document information

1.1 Target audience for this manual

This manual should support the operating personal working on a regular basis with the Tank

Gauging System understanding the possible tasks they have to perform and should serve as

encyclopedia for those tasks.

Beside basic PC operating knowledge no special training is needed to perform the Tank

Gauging System operations. Nevertheless it is recommended receiving a training on the

system by Endress+Hauser.

1.2 Version history

1.3 Document function

1.3.1 Used symbols

Safety symbols

Symbols for certain types of information

Document version Valid for SW version Changes to the previous version

BA01288G/00/EN/01.14 3.0.10 Initial version

Symbol Meaning

A0011189-EN

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will

result in serious or fatal injury.

A0011190-EN

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in serious or fatal injury.

A0011191-EN

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in minor or medium injury.

A0011192-EN

NOTICE!

This symbol contains information on procedures and other facts which do not result

in personal injury.

Symbol Meaning

A0011193

Tip

Indicates additional information.

A0011195

Reference to page

Refers to the corresponding page number.

, , ... Series of steps

A0018373

Result of a sequence of actions

DANGER

WARNING

CAUTION

NOTICE

1. 2.

Document information Tankvision

4Endress+Hauser

Symbols in graphics

1.4 Documentation

1.4.1 Operating instructions

Symbol Meaning

1, 2, 3 ... Item numbers

, , ... Series of steps

A, B, C... Views

A0011187

Hazardous area

Indicates a hazardous area.

A0011188

Indicates a non-hazardous location

Safe area (non-hazardous area)

Document number Instrument Type of Document

BA01288G/00

•MultiScanNXA83

Operation manual

BA01290G/00 Installation and Maintenance manual

BA01291G/00 Configuration manual

BA01292G/00 DCC Configuration manual

BA01289G/00 OPC Tank Data Server manual

BA01297G/00 Web Client System Operation manual

BA01287G/00 Weights and Measures Additions

BA01296G/00 Redundancy manual

Tankvision Basic safety instructions

Endress+Hauser 5

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel for installation, commissioning, diagnostics and maintenance must fulfill the

following requirements:

• Trained, qualified specialists: must have a relevant qualification for this specific function

and task

• Are authorized by the plant owner/operator

• Are familiar with federal/national regulations

• Before beginning work, the specialist staff must have read and understood the instructions

in the Operating Instructions and supplementary documentation as well as in the

certificates (depending on the application)

• Following instructions and basic conditions

The operating personnel must fulfill the following requirements:

• Being instructed and authorized according to the requirements of the task by the facility's

owner operator

• Following the instructions in these Operating Instructions

2.2 IT security

We only provide a warranty if the device is installed and used as described in the Operating

Instructions. The device is equipped with security mechanisms to protect it against any

inadvertent changes to the device settings.

IT security measures in line with operators' security standards and designed to provide

additional protection for the device and device data transfer must be implemented by the

operators themselves.

Endress+Hauser can be contacted to provide support in performing this task.

2.3 Designated use

2.3.1 Applications

Inventory control

By using Tankvision Multi Scan to monitor the tank level and stored volume of valuable

liquids remotely, owners or operators of tank farms or terminals for petroleum products and

chemicals (liquids) can visualize the volume of the stored medium in real time. The data can

be used to plan the inventory and distribution. The data can also be used to manage tank

farm operations like pumping or transferring products. Tankvision has its unique concept

using network technology. Without using proprietary software, the users can visualize and

manage their valuable liquids stored in the tanks by a web browser. Tankvision Multi Scan

is a flexible and cost effective solution due to its scalable architecture. The application

coverage goes from small depots with only a few tanks up to refineries.

Inventory Calculations

Tankvision Multi Scan calculates based on measured variables and tank capacity tables:

• Observed/Gross volumes,

•Netvolumesand

•Mass

of products like

• Hydrocarbons,

Basic safety instructions Tankvision

6Endress+Hauser

• Liquefied gases,

• Asphalt.

They are corrected according to international standards, including API/ASTM tables 5A, 5B/

6, 53A, 53B/54, 23/24, LPG.

This includes temperature corrections at 15 °C, 60 °F and alternative temperatures.

Additionally, available pumpable volumes and water volume are calculated.

Remote configuration of measuring equipment

Some on-site operations can be avoided using remote configuration of measuring equipment

during commissioning or maintenance (the availability of this feature may depend on the

system configuration).

Application areas

• Tank farms in refineries

• Ship loading terminals

• Marketing and distribution terminals

• Pipeline terminals

• Logistic terminals for tanks storing products like crude oils, refined white and black

products, chemicals, LPG

2.4 Workplace safety

For work on and with the device:

• Wear the required personal protective equipment according to federal/national

regulations.

• Switch off the supply voltage before connecting the device.

2.5 Operational safety

Risk of injury!

• Operate the device in proper technical condition and fail-safe condition only.

• The operator is responsible for interference-free operation of the device.

Conversions to the device

Unauthorized modifications to the device are not permitted and can lead to unforeseeable

dangers

• If, despite this, modifications are required, consult with Endress+Hauser.

Repair

To ensure continued operational safety and reliability,

• Carry out repairs on the device only if they are expressly permitted.

• Observe federal/national regulations pertaining to repair of an electrical device.

• Use original spare parts and accessories from Endress+Hauser only.

2.6 Product safety

The device is designed to meet state-of-the-art safety requirements, has been tested and left

thefactory in a condition in which it is safe to operate. The device complies with the

applicable standards and regulations as listed in the EC declaration of conformity and thus

complies with the statutory requirements of the EG directives. Endress+Hauser confirms the

successful testing of the device by affixing to it the CE mark.

Tankvision Identification

Endress+Hauser 7

3 Identification

3.1 Product identification

The following options are available for identification of the device:

• Nameplate specifications

• Order code with breakdown of the device features on the delivery note

• Enter serial numbers from nameplates in W@M Device Viewer

(www.endress.com/deviceviewer): All information about the device is displayed.

For an overview of the technical documentation provided, enter the serial number from the

nameplates in the W@M Device Viewer (www.endress.com/deviceviewer)

3.2 Nameplate

nameplate

1 Address of manufacturer

2 Device name

3Ordercode

4 Extended order code (Ext. ord. cd.)

5 Serial number (Ser. no.)

6 Degree of protection

7Barcode

8CEmark

9 Admissible ambient temperature

10 Supply voltage

250002972--

Order code:

Ext. Order code:

Ser.-No.:

Tankvision

12345

Identification Tankvision

8Endress+Hauser

3.3 Order code and device version

To find out the version of your device, enter the order code indicated on the nameplate

in the search screen at the following address:

www.products.endress.com/order-ident

3.4 Registered trademarks

Microsoft®, Windows®and Internet Explorer®

Registered trademarks of the Microsoft Corporation

Modbus®

Registered trademark of the Modbus-IDA, Hopkinton, MA, USA

Java®

Registered trademark of Sun Microsystems, Inc.

Mozilla®Firefox®

Registered trademark of the Mozilla Foundation

Enraf, Honeywell, Rosemount, Emerson, Saab, L&J, VAREC, GPE are registered trademarks

and trademarks of these organizations and companies.

All other marks are property of their respective owners.

Tankvision Introduction

Endress+Hauser 9

4Introduction

The Multi Scan NXA83 is a configurable system designed for tank gauging and tank

inventory management systems. It has been designed to fulfill a number of requirements

some of which are listed below:

• Act as a foreign device gateway allowing old legacy equipment and devices with

proprietary interfaces to interface with modern devices using OPC and Ethernet

Technology.

• To provide a complete tank gauging and tank inventory management system for small

sites. It can interface directly with a wide variety of tank gauging devices and provide a

number of communication links to host devices. The Multi Scan NXA83 polls the field

instruments maintaining an in-memory database of live and calculated data whilst also

being able to service host computers for data.

• Up to 8 serial interfaces can be provided, capable of supporting a range of different

electrical interfaces such as RS232, RS485, BPM, Current Loop etc.

• An Ethernet port and two USB ports are also provided.

Two versions of the Multi Scan NXA83 are available, Wall Mount and 19 in Rack Mount.

Both versions have the option to have a 7 in touch screen built into the front of the device to

view and navigate through the different display options.

NXA83_Wall-Mount

Wall Mount

NXA83_Rack-Mount

19 in Rack Mount

Operation Tankvision

10 Endress+Hauser

5Operation

This section will describe the normal operation of the Multi Scan NXA83 and the

interactions with the user screens.

The screens shown on the LCD display are highly configurable. Whilst those shown in this

section are only examples of what can be displayed, the basic navigation between screens

will remain the same.

For more information on configuring the displays refer to the Multi Scan NXA83

Configuration manual (BA01291G).

5.1 Starting and Stopping

When power is applied to the Multi Scan NXA83 the Green power LED will be illuminated

and the Windows XPe operating system will start to boot.

This will take around three minutes, during which time a number of windows boot messages

will be displayed before automatically logging into the user account, at which point the

Endress+Hauser wait message will be displayed.

NXA83_E+H_Wait_Message

The boot will be complete when the GridView display is shown. At this point the system is

fully operational, with all interfaces active (master and slaves).

NXA83_Display_Grid-View

It is perfectly safe to switch off the power without shutting down the operating system. The

Multi Scan NXA83 contains an Enhanced Write Filter which protects the system from being

corrupted due to a loss of power (see configuration document for description).

Andere Handbücher für Tankvision Multi Scan NXA83

Inhaltsverzeichnis

Andere Endress+Hauser Industrieanlagen Handbücher

Endress+Hauser

Endress+Hauser Proline Promag 300 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Kit CSF48 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA871 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit H CPA475 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Teqwave F/I Technische Daten

Endress+Hauser

Endress+Hauser Deltabar S PMD75 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Proline t-mass 300 Bedienerhandbuch

Endress+Hauser

Endress+Hauser FieldEdge SGC500 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF39 Technische Daten

Endress+Hauser

Endress+Hauser TopCal S CPC 300 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR67 Firmware-Update

Endress+Hauser

Endress+Hauser SmarTec S CLD 132 PROFIBUS-PA Bedienungsanleitung

Endress+Hauser

Endress+Hauser CleanFit P CPA 474 Bedienungsanleitung

Endress+Hauser

Endress+Hauser TOC Analyzer CA78 Bedienungsanleitung

Endress+Hauser

Endress+Hauser OUSTF10 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CYR52 Bedienungsanleitung

Endress+Hauser

Endress+Hauser HART Field Xpert Bedienungsanleitung

Endress+Hauser

Endress+Hauser Flowphant T ODTT31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser T13 Handbuch

Endress+Hauser

Endress+Hauser SpectraSensors OXY5500 Installationsanleitung

Endress+Hauser

Endress+Hauser Cleanfit COA451 Bedienungsanleitung

Endress+Hauser

Endress+Hauser ASP Station 2000 RPS20B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prothermo NMT 539 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Soliwave FDR16 Technische Daten

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung