Endress+Hauser Hart Proline Promag P 500 Bedienerhandbuch

Products Solutions Services

Special Documentation

Proline Prosonic Flow P 500

Heartbeat Verification + Monitoring application package

HART

SD02593D/06/EN/01.21

71509604

2021-05-10

Valid as of version

01.01.zz (Device firmware)

Proline Prosonic Flow P 500 HART Table of contents

Endress+Hauser 3

Table of contents

1 Manufacturer's Declaration ......... 4

2 Certificate .......................... 5

3 About this document ................ 6

3.1 Document function ..................... 6

3.2 Content and scope ...................... 6

3.3 Symbols .............................. 6

3.4 Documentation ........................ 7

3.5 Registered trademarks ................... 7

4 Product features and availability ..... 8

4.1 Product features ....................... 8

4.2 Availability ........................... 8

5 System integration ................ 10

5.1 Automated data exchange ............... 11

5.2 Data exchange performed by the user (asset

management system) .................. 12

5.3 Data management ..................... 12

6 Heartbeat Verification ............. 19

6.1 Performance characteristics .............. 19

6.2 Commissioning ....................... 19

6.3 Operation ........................... 20

7 Heartbeat Monitoring ............. 46

7.1 Commissioning ....................... 46

7.2 Operation ........................... 47

Manufacturer's Declaration Proline Prosonic Flow P 500 HART

4 Endress+Hauser

1 Manufacturer's Declaration

A0040349-EN

Proline Prosonic Flow P 500 HART Certificate

Endress+Hauser 5

2 Certificate

A0045948-EN

About this document Proline Prosonic Flow P 500 HART

6 Endress+Hauser

3 About this document

3.1 Document function

This manual is a Special Documentation and does not replace the Operating Instructions

included in the scope of supply. It is a part of the Operating Instructions and serves as a

reference for using the Heartbeat Technology function integrated in the measuring device.

3.2 Content and scope

This document contains descriptions of the additional parameters and technical data of

the application package and detailed explanations regarding:

• Application-specific parameters

• Advanced technical specifications

3.3 Symbols

3.3.1 Safety symbols

DANGER

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in

serious or fatal injury.

WARNING

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

serious or fatal injury.

CAUTION

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

minor or medium injury.

NOTICE

This symbol contains information on procedures and other facts which do not result in

personal injury.

3.3.2 Symbols for certain types of information

Symbol Meaning

Permitted

Procedures, processes or actions that are permitted.

Forbidden

Procedures, processes or actions that are forbidden.

Tip

Indicates additional information.

Reference to documentation

Reference to page

Reference to graphic

Notice or individual step to be observed

… Series of steps

Result of a step

Proline Prosonic Flow P 500 HART About this document

Endress+Hauser 7

Symbol Meaning

A0028662

Operation via local display

A0028663

Operation via operating tool

A0028665

Write-protected parameter

3.3.3 Symbols in graphics

Symbol Meaning

1, 2, 3 ... Item numbers

A, B, C, ... Views

A-A, B-B, C-C, ... Sections

3.4 Documentation

For an overview of the scope of the associated Technical Documentation, refer to the

following:

•W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number

from nameplate

•Endress+Hauser Operations App: Enter the serial number from the nameplate or

scan the 2D matrix code (QR code) on the nameplate

This Special Documentation is available:

In the Download Area of the Endress+Hauser Internet site: www.endress.com →

Downloads

This documentation is an integral part of the following Operating Instructions:

Measuring device Documentation code

Prosonic Flow P 500 BA02025D

3.5 Registered trademarks

HART®

Registered trademark of the FieldComm Group, Austin, Texas, USA

Product features and availability Proline Prosonic Flow P 500 HART

8 Endress+Hauser

4 Product features and availability

4.1 Product features

Heartbeat Technology offers diagnostic functionality through continuous self-monitoring,

the transmission of additional measured variables to an external Condition Monitoring

system and the in-situ verification of flowmeters in the application.

The test scope achieved using these diagnostic and verification tests is referred to as the

Total Test Coverage (TTC). The TTC is calculated using the following formula for random

errors (calculation based on FMEDA as per IEC 61508):

TTC = (λTOT – λdu) / λTOT

λTOT: Rate of all theoretically possible failures

λdu: Rate of undetected dangerous failures

Only the dangerous undetected failures are not diagnosed by the device diagnostics. If

these failures occur, they can distort the measured value that is displayed or interrupt the

output of measured values.

Heartbeat Technology checks the device function within the specified measuring tolerance

with a defined TTC.

The current value for the TTC depends on the configuration and integration of the

measuring device. The values indicated above were determined under the following

conditions:

• Integration of the measuring device for measured value output via 4 to 20mA HART

output

• Simulation operation not active

• Error behavior, current output set to Minimum alarm or Maximum alarm and

evaluation unit recognizes both alarms

• Settings for diagnostic behavior correspond to factory settings

4.2 Availability

The application package can be ordered together with the device or can be activated

subsequently with an activation code. Detailed information on the order code is available

via the Endress+Hauser website www.endress.com or from your local Endress+Hauser

Sales Center.

4.2.1 Order code

If ordering directly with the device or subsequently as a retrofit kit:

Order code for "Application package", option EB "Heartbeat Verification + Monitoring"

The availability of the application package can be checked as follows:

• Order code with breakdown of the device features on the delivery note

• Call up the Device Viewer via the website www.endress.com/deviceviewer: enter the

serial number from the nameplate and check whether the feature is displayed

• In the operating menu Expert → System → Administration : The Software option

overview parameter indicates whether the application package is enabled

Proline Prosonic Flow P 500 HART Product features and availability

Endress+Hauser 9

4.2.2 Activation

A retrofit kit is supplied if the application package is ordered subsequently. This kit

includes a tag plate with device data and an activation code.

For detailed information on "Activating application packages via the software license

code", see Installation Instructions EA01164D

4.2.3 Access

Heartbeat Technology is compatible with all the system integration options. Interfaces

with digital communication are required to access the data saved in the device. The speed

of data transmission depends on the type of communication interface used.

System integration Proline Prosonic Flow P 500 HART

10 Endress+Hauser

5 System integration

The Heartbeat Technology features are available via the local display module and the

digital interfaces. The features can be used via an asset management system and the

automation infrastructure (e.g. PLC).

1 2

A0020248

1 PLC

2 Asset Management System

3 Measuring device

E+-

ESC

3 54

Veriﬁcation

A0031421

1 Local display

2 Web browser

3 FieldCare

4 Data archive in the device

5 W@M Portal

6 Verification report

Andere Handbücher für Hart Proline Promag P 500

Inhaltsverzeichnis

Andere Endress+Hauser Industrieanlagen Handbücher

Endress+Hauser

Endress+Hauser HART Proline Promass 500 Bedienerhandbuch

Endress+Hauser

Endress+Hauser SpectraSensors OXY5500 Installationsanleitung

Endress+Hauser

Endress+Hauser Kit CSF48 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Tankvision Multi Scan NXA83 Bedienungsanleitung

Endress+Hauser

Endress+Hauser OUSTF10 Bedienungsanleitung

Endress+Hauser

Endress+Hauser LTC2230 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR50 Firmware-Update

Endress+Hauser

Endress+Hauser Analytik Jena CyBio Well vario Bedienungsanleitung

Endress+Hauser

Endress+Hauser Soliwave FDR16 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA871 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR67 Firmware-Update

Endress+Hauser

Endress+Hauser CleanFit CUA 451 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA871 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Tankvision Multi Scan NXA83 Bedienungsanleitung

Endress+Hauser

Endress+Hauser TOC Analyzer CA78 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Stamoclean CAT430 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit P CPA471 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Fieldgate FXA720 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prothermo NMT 539 Bedienungsanleitung

Endress+Hauser

Endress+Hauser 51517656 CleanFit H CPA 475 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiport 2000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena HS 55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit COA451 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline Control CDC90 Technische Daten

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung