Endress+Hauser Cleanfit CPA871 Bedienungsanleitung

Products Solutions Services

Operating Instructions

Cleanfit CPA871

Flexible retractable process assembly for water,

wastewater, chemical industry and heavy industry

BA01323C/07/EN/06.22-00

71563008

2022-03-04

Cleanfit CPA871 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ........... 4

1.1 Warnings ........................... 4

1.2 Symbols used ........................ 4

1.3 Symbols on the device ................ 4

2 Basic safety instructions ....... 5

2.1 Requirements for the personnel ........ 5

2.2 Intended use ........................ 5

2.3 Workplace safety .................... 6

2.4 Operational safety ................... 7

2.5 Product safety ....................... 7

3 Product description ............. 8

3.1 Product design ....................... 8

4 Incoming acceptance and

product identification ......... 11

4.1 Incoming acceptance ................ 11

4.2 Scope of delivery .................... 11

4.3 Product identification ................ 12

5 Mounting ...................... 12

5.1 Mounting requirements .............. 12

5.2 Mounting the assembly .............. 21

5.3 Post-mounting check ................ 43

6 Commissioning ................ 43

6.1 Preliminaries ....................... 43

7 Operation ...................... 44

7.1 Adapting the assembly to the process

conditions ......................... 44

8 Maintenance .................. 48

8.1 Maintenance schedule ............... 48

8.2 Maintenance tasks .................. 49

9 Repair .......................... 70

9.1 General notes ...................... 70

9.2 Spare parts ........................ 70

9.3 Return ............................ 70

9.4 Disposal ........................... 71

10 Accessories .................... 72

10.1 Device-specific accessories ............ 73

10.2 Service-specific accessories ........... 78

10.3 Installation material for rinse

connections ........................ 80

11 Technical data ................. 80

11.1 Mounting .......................... 80

11.2 Environment ....................... 81

11.3 Process ............................ 81

11.4 Mechanical construction ............. 87

Index ................................. 88

About this document Cleanfit CPA871

4 Endress+Hauser

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of non-

compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols used

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

1.3 Symbols on the device

Reference to device documentation

Do not dispose of products bearing this marking as unsorted municipal waste. Instead, return them to the

manufacturer for disposal under the applicable conditions.

Cleanfit CPA871 Basic safety instructions

Endress+Hauser 5

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance of the measuring system may be

carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Intended use

The Cleanfit CPA871 retractable assembly, which can be manually or pneumatically operated,

is designed for the installation of sensors in vessels and pipes.

Thanks to its design, it can be operated in pressurized systems (→  80).

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.2.1 Use in explosion-proof areas

As a manufacturer of products used for analysis, we declare that the product supplied has

undergone an ignition risk assessment and may be used in hazardous atmospheres once the

following conditions for safe usage have been met:

• The protective ring is labeled as follows: "CAUTION, DANGER DUE TO ELECTROSTATIC

CHARGES, CLEAN USING ONLY AN ANTISTATIC CLOTH". This instruction must be

observed.

• Assemblies comprising wetted parts made of non-conductive material, must not be used in

potentially explosive atmospheres.

• The compressed air supply, sensors and limit position switches must comply with the

applicable guidelines and standards for use in hazardous atmospheres, be labeled with the

degree of protection and meet the requirements of the relevant range of application. The

ambient temperatures must be observed. The limit position switch used in the product

complies with this requirement.

• Ensure that the compressed air does not contain a potentially explosive atmosphere.

• Please ensure that movements associated with the retraction and insertion of the sensor do

not damage the connection.

• The product must be incorporated into the local potential equalization system.

• The Operating Instructions for the product and in particular the conditions for safe usage

must be read, understood and implemented.

The product does not need to be labeled with the degree of protection.

Basic safety instructions Cleanfit CPA871

6 Endress+Hauser

2.3 Workplace safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Cleanfit CPA871 Basic safety instructions

Endress+Hauser 7

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

2.5 Product safety

2.5.1 State-of-the-art technology

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

international standards have been observed.

Product description Cleanfit CPA871

8 Endress+Hauser

3 Product description

3.1 Product design

A0029614

 1 Assembly with pneumatic drive (without protective cover)

1Rinse connection (outlet)

2 Automatic limit position

lock, process

3 Connection for limit

position switch

4 Automatic limit position

lock, service

5 Fastening ring for

protective cover

6 Pneumatic connection

(move to measuring

position)

7 Pneumatic connection

(move to service position)

8 Rinse connection (inlet)

Cleanfit CPA871 Product description

Endress+Hauser 9

3.1.1 Operating principle

A0039361

 2 Sealing system, assembly in service position

1 Rinse chamber, inlet

2 Seal, drive (1 x O-ring)

3 Leakage hole

4 Rinse chamber, outlet

5 Seal, rinse chamber (1 x O-ring)

6 Process seal (2 x O-ring)

7 Rinse chamber

The assembly is open to the process during insertion/retraction; the rinse connections must

either be pipe-fitted or sealed.

The assembly has a pin seal. This seals the assembly from the process in the relevant limit

position.

Product description Cleanfit CPA871

10 Endress+Hauser

Process seal

A0039106

 3 Process seal, assembly in service position

1 Process seal (2 x O-ring)

2 Pin

Andere Handbücher für Cleanfit CPA871

Inhaltsverzeichnis

Andere Endress+Hauser Industrieanlagen Handbücher

Endress+Hauser

Endress+Hauser CleanFit CUA 451 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SpectraSensors OXY5500 Installationsanleitung

Endress+Hauser

Endress+Hauser Cleanfit COA451 Bedienungsanleitung

Endress+Hauser

Endress+Hauser 51517656 CleanFit H CPA 475 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CYR52 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena HS 55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Soliwave FQR56 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Hart Proline Promag P 500 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Silopilot FMM50 Technische Daten

Endress+Hauser

Endress+Hauser Kit CSF48 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline Control CDC90 Technische Daten

Endress+Hauser

Endress+Hauser Prothermo NMT 539 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Soliwave FDR16 Technische Daten

Endress+Hauser

Endress+Hauser Soliwave FDR16 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF39 Technische Daten

Endress+Hauser

Endress+Hauser FieldEdge SGC500 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline t-mass 300 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Flowphant T ODTT31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR50 Firmware-Update

Endress+Hauser

Endress+Hauser SmarTec S CLD 132 PROFIBUS-PA Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant M/S FTL5 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquistation CSF48 Technische Daten

Endress+Hauser

Endress+Hauser TOC Analyzer CA78 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prothermo NMT 539 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung