Endress+Hauser Memograph CVM40 Bedienungsanleitung

KA457C/07/EN/13.10

71128660

Brief Operating Instructions

Memograph CVM40

Graphic transmitter for inline photometers and data

manager

Endress+Hauser

Memograph CVM40

Table of contents

1 Safety instructions . . . . . . . . . . 4

1.1 Designated use . . . . . . . . . . . . . . . . . . . . . . 4

1.2 Installation, commissioning and operation . 4

1.3 Operational safety . . . . . . . . . . . . . . . . . . . 4

1.4 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.5 Notes on safety icons and symbols . . . . . . . 5

1.6 Document symbols . . . . . . . . . . . . . . . . . . 5

2 Identification . . . . . . . . . . . . . . 6

2.1 Scope of delivery . . . . . . . . . . . . . . . . . . . . 6

3 Installation . . . . . . . . . . . . . . . . 7

3.1 Measuring system . . . . . . . . . . . . . . . . . . . 7

3.2 Installation conditions . . . . . . . . . . . . . . . . 8

3.3 Installation instructions . . . . . . . . . . . . . . . 9

4 Wiring . . . . . . . . . . . . . . . . . . 11

4.1 Electrical connection . . . . . . . . . . . . . . . . 11

4.2 Wiring diagram . . . . . . . . . . . . . . . . . . . . 12

4.3 Terminal assignment . . . . . . . . . . . . . . . . 15

4.4 Interface connection . . . . . . . . . . . . . . . . 15

5 Commissioning and

operation . . . . . . . . . . . . . . . . 16

5.1 Display and operating elements . . . . . . . . 16

5.2 Switching on . . . . . . . . . . . . . . . . . . . . . . 18

5.3 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Index . . . . . . . . . . . . . . . . . . . 26

Safety instructions Memograph CVM40

4Endress+Hauser

1 Safety instructions

1.1 Designated use

This unit is designed for operating inline photometers for UV, color, NIR, turbidity and cell growth.

Furthermore it can be used for the electronic acquisition, display, recording, analysis, remote

transmission and archiving of analog and digital input signals in non-hazardous areas.

The unit is suitable for installation in a panel or a cabinet and may only be operated in an installed state.

Any other use than the one described here compromises the safety of persons and the entire measuring

system and is not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

1.2 Installation, commissioning and operation

Please note the following items:

• Installation, commissioning, operation and maintenance of the measuring system must only be

carried out by trained technical personnel.

Trained personnel must be authorized for the specified activities by the system operator.

• Electrical connection must only be carried out by a certified electrician.

• Technical personnel must have read and understood these Operating Instructions and must adhere

to them.

• Before commissioning the entire measuring point, check all the connections. Ensure that electrical

cables and hose connections are not damaged.

• Do not operate damaged products and secure them against unintentional commissioning. Mark the

damaged product as being defective.

• Measuring point faults may only be rectified by authorized and specially trained personnel.

• If faults can not be rectified, the products must be taken out of service and secured against

unintentional commissioning.

• Repairs not described in these Operating Instructions may only be carried out at the manufacturer’s

or by the service organization.

1.3 Operational safety

The measuring system has been designed and tested to the highest standards and left the factory in

perfect functioning order.

Relevant regulations and European standards have been met.

As the user, you are responsible for complying with the following safety conditions:

• Installation instructions

• Local prevailing standards and regulations.

Immunity to interference

This instrument has been tested for electromagnetic compatibility in industrial use according to

applicable European standards.

Protection against interference as specified above is valid only for an instrument connected according

to the instructions in these Operating Instructions.

Memograph CVM40 Safety instructions

Endress+Hauser 5

1.4 Return

If the device has to be repaired, please return it cleaned to the sales center responsible.

Please use the original packaging, if possible.

1.5 Notes on safety icons and symbols

Safety icons

1.6 Document symbols

#Warning!

This symbol alerts you to hazards that can cause serious damage to the instrument or

to persons if ignored.

"Caution!

This symbol alerts you to possible faults which could arise from incorrect operation.

They could cause damage to the instrument if ignored.

!Note!

This symbol indicates important items of information.

È ä 1 This symbol indicates a cross reference to a defined page (e.g. p. 1).

È å 2 This symbol indicates a cross reference to a defined figure (e.g. fig. 2).

Identification Memograph CVM40

6Endress+Hauser

2 Identification

2.1 Scope of delivery

The scope of delivery comprises:

• Device (with terminals, as per your order)

• 2 fastening clips

• USB interface cable, length 1.5 m (4.9 ft)

• Optional secure digital (SD) card

• Link to PC operating and configuration software on CD-ROM

• Lamp voltage sense tool

• Brief Operating Instructions as hard copy

• Operating Instructions on CD-ROM

If you have any questions, please contact your supplier or your local sales center.

Memograph CVM40 Installation

Endress+Hauser 7

3 Installation

3.1 Measuring system

A complete measuring system comprises:

• Memograph CVM40

• An optical sensor, e.g. OUSAF44

• Flow assembly, e.g. OUA260

• Cable set, e.g. OUK40

a0012117

Fig. 1: Example of a measuring system

1 Cable set OUK40

2 Memograph CVM40 photometer

3 OUSAF44 sensor

4 OUA260 flow assembly

Installation Memograph CVM40

8Endress+Hauser

3.2 Installation conditions

Working temperature range:

-10 to 50 °C (14 to 122 °F), max. 75% rel. humidity without condensation.

"Caution!

• To avoid heat accumulation, please always ensure that the unit is sufficiently cooled.

• Maintain distance from strong magnetic fields (see Operating Instructions on CD-ROM, Section 10

"Technical data", interference immunity)

• Permitted ambient conditions at front: in accordance with unit ingress protection of max. IP65 (with

front flap closed)

Memograph CVM40 Installation

Endress+Hauser 9

3.3 Installation instructions

3.3.1 Mounting the device

Panel cutout and installation / design, dimensions

a0012075

Fig. 2: Dimensions / panel cutout

29.5

(1.16)

76 (2.99)

199.2 (7.84)

216.03 (8.51)

137.5 (5.41) 29

(1.14)

39.07

(1.54)

136 (5.35)

195.23 (7.69)

149.23 (5.88)

7 (0.28)

mm (inch)

138 (5.43)

196.2 (7.72)

58.2 (2.29)

138 (5.43)

156.2 (6.15)

18.2(0.72)

Installation Memograph CVM40

10 Endress+Hauser

Mounting dimensions:

• Installation depth: approx. 216 mm (8.51") (incl. terminals)

• Panel cutout: 138+1 x 138+1 mm (5.43+0.04 x 5.43+0.04")

• Panel thickness: 2 to 40 mm (0.08 to 1.58")

• Max. viewing angle range: from the central display axis 50° in all directions

• Securing according to DIN 43 834

!Note!

Make sure to leave an additional clearance of min. 35 mm (1.4") for cable connection.

1. Push the unit through the panel cutout from the front. To avoid heat accumulation, we

recommend keeping a distance of > 15 mm (>0.59 inch) from the walls and other units.

2. Hold the unit horizontally and then hang the two jack screws in the openings opposite (either on

left or right housing side, or at top or bottom).

3. Tighten the screws on the jack screws equally with a screwdriver such that a secure seal to the

control panel is guaranteed.

Note the following points for installation:

• A distance of min. 7 mm (0.28") has to be observed if aligning the devices in the Y direction (vertically

above on another).

• The devices can be arranged horizontally beside on another in the X direction without any spacing

between the devices.

• The grid dimension of the panel cutouts for multiple devices must be min. 196.2 mm (7.72")

horizontally and min. 156.2 mm (6.15") vertically (tolerance not considered).

Andere Handbücher für Memograph CVM40

Inhaltsverzeichnis

Andere Endress+Hauser Sender Handbücher

Endress+Hauser

Endress+Hauser iTEMP TMT162 Technische Daten

Endress+Hauser

Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S PMC71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser smartgrad TMD833 Bedienungsanleitung

Endress+Hauser

Endress+Hauser RMA42 Technische Daten

Endress+Hauser

Endress+Hauser cerabar S PROFIBUS-PA Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FHX50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser TMD1000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT86 Technische Daten

Endress+Hauser

Endress+Hauser Liquisys M CUM 223 Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT82 Technische Daten

Endress+Hauser

Endress+Hauser iTEMP TMT80 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Promag Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquisys M CPM223 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline 500 digital HART Technische Daten

Endress+Hauser

Endress+Hauser RMA42 Technische Daten

Endress+Hauser

Endress+Hauser Proline 500 PROFINET Technische Daten

Endress+Hauser

Endress+Hauser iTEMP TMT82 Technische Daten

Endress+Hauser

Endress+Hauser Liquiline M OM42 Handbuch

Endress+Hauser

Endress+Hauser iTEMP TMT162 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S PMC71 Handbuch

Endress+Hauser

Endress+Hauser Liquisys M CLM223F Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquisys M CUM 223 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung