Energetics CT 570 Bedienungsanleitung

CT 570 ERGOMETER BIKE

Table of contents - Inhaltsverzeichnis - Obsah - Obsah - Tájékoztató

English P. 3

Deutsch P. 17

esky P. 33

Slovensky P. 48

Magyar P. 63

change in technical specification of the product.

©Die Gebrauchsanweisung dient nur zur Referenz für den Kunden. ENERGETICS übernimmt keine Haftung für Fehler die durch

Übersetzung oder technische Änderungen des Produkts entstehen.

©Návod k použití je pouze doporuení pro zákazníky. ENERGETICS nepebírá žádné ruení za chyby zpsobené pekladem i

zmnami v technické specfikaci výrobku.

prekladu alebo zmenám v technickej špecifikácii produktu.

a termék mszaki módosításaiból eredhibákért.

Dear Customer,

Congratulations on your purchase of an ENERGETICS home exerciser. This product has been designed and

manufactured to meet the needs and requirements of in-home use. Please carefully read the instructions prior to assembly

and first use. Be sure to keep the instructions for reference and/ or maintenance. If you have any further questions, please

Your - Team

Warranty

ENERGETICS offers high quality home exercisers that have been tested and certified according to European Norm EN

957.

ENERGETICS warrants to the original purchaser 3 years against possible defects in material and workmanship. Excluded

are damages caused by misuse and wearing parts. All electronic parts are warranted for a period of 2 years. The warranty

period starts at the date the product was purchased (retain your sales receipt).

Safety Instructions

•Consult your physician before starting with any exercise programme to receive advice on the optimal training.

•Warning: incorrect/ excessive training can cause health injuries. Stop using the home exerciser when feeling

uncomfortable.

•Ensure that training only starts after correct assembly, adjustment and inspection of the home exerciser.

•Always start with a warm-up session.

•Only use original ENERGETICS parts as delivered (see checklist).

•Follow the steps of the assembly instruction carefully.

•Only use suitable tools for assembly and ask for assistance if necessary.

•Place the home exerciser on an even, non-slippery surface.

•Use the height adjustment caps on the rear tube to ensure a stable position of the home exerciser.

•Make sure the front wheels are placed in the correct position: see assembly instruction.

•For all adjustable parts be aware of the maximum position to which they can be adjusted.

•Tighten all adjustable parts to prevent sudden movement while training.

•This product is designed for adults. Please ensure that children only use it under the supervision of an adult.

•Ensure that those present are aware of possible hazards, e.g. movable parts during training.

•The resistance level can be adjusted to your personal preference.

•Do not use the home exerciser without shoes or loose shoes.

•Ensure that sufficient space is available to use the home exerciser.

•Be aware of non-fixed or moving parts whilst mounting or dismounting the home exerciser.

The resistance can be changed by computer.

-This product is made for home use only and tested up to a maximum body weight of 130 kilograms.

-Keep special attention to the minimum insertion depth of the seat post.

Pre-assembly notes

OPEN THE BOXES

Make sure to inventory all the parts that are included in the boxes. Check The Hardware Chart

for a full count of the number of parts included for proper assembly.

GATHER YOUR TOOLS

Before starting the assembly of your unit, gather the necessary tools. Having all of the equipment at

hand

will save time and make the assembly quick and hassle-free.

CLEAR YOUR WORK AREA

Make sure that you have cleared away a large enough space to properly

assemble the unit. Make sure the space is free from anything that may cause

injury during assembly. After the unit is fully assembled, make sure there is a

comfortable amount of free area around the unit for unobstructed operation.

Hardware chart

5 M8 WASHER (T=1.2) 10

6 M8 SPRING WAHER 10

7 M8 CP NUT 2

10 M8*15mm ALLEN HEAD SCREW 8

4 M8*52mm CARRIAGE BOLT 2

21 SEAT KNOB 1

87 ALLEN KEY 1

89 TOOL 1

90 TOOL 1

Part list

NO. DESCRIPTION Q'TY

NO.

DESCRIPTION Q'TY

1 BASE FRAME 1 46 HANDLEBAR CAP 2

2 FRONT FOOT 1 47 SCREW M8 * 25 mm 2

3 FRONT FOOT COVER(L&R) 2 48 SERVO MOTOR 1

4 M8 * 52 mm CARRIAGE BOLT 2 49 DRIVE WIRE ROD WHEEL 1

5 M8 WASHER (t=1.2) 11 50 CLIP C5 (ID 4.7mm) 1

6 M8 SPRING WASHER 12 51 M6*10mm SCREW 2

7 M8 CAP NUT 2 52 SENSOR BRACKET 1

8 REAR FOOT 1 53 SENSOR WIRE 1

9 REAR FOOT COVER 2 54 #6-32 *12mm SCREW 1

10 M8*15mm ALLEN HEAD SCREW 8 55 WIRE ROD 1

11 LEFT CHAIN COVER 1 56 SMALL SPRING 1

12 RIGHT CHAIN COVER 1 57 M8 NYLON NUT 1

13 HANDLEBAR POST 1 58 M8*52MM HEX HEAD BOLT 1

14 COMPUTER UPPER CABLE 1 59 MAGNETIC HOLDER 1

15 COMPUTER LOWER CABLE 1 60 BEARING (6203ZZ) 4

16 SADDLE POST 1 61 CLIP C17(ID 15.7mm) 3

17 DC CABLE 1 62 MAGNET 1

18 MOVABEL SEAT POST 1 63 REAR PULLEY 1

18A SADDLE POST HOLDER 1 64 WASHER ID17 OD22 <t = 0.3 mm > 1

19 SADDLE 1 65 AXLE FOR PULLEY 1

19A SADDLE BRACKET 1 66 M6*15mm SCREW 4

20 MOVABEL SEAT POST KNOB 1 67 BELT 1

21 SEAT KNOB 1 68 M8*15mm HEX HEAD SCREW 2

22 COMPUTER 1 69 MAGNETIC HOLDER BRACKET 1

23 M5*12mm SCREW 4 70 BRACKET 1

24 HAND PULSE WIRE 1 71 LARGE SPRING 1

25 FOAM GRIP 2 72 SPACER SLEEVE 3

26 HAND PULSE



PE16



2 73 M6*1.5mm WASHER 3

27 HANDLEBAR 1 74 M6*14mm SCREW 3

28 FRONT POST COVER 1 75 BEARING (6300ZZ) 1

29 SADDLE POST COVER 1 76 FRONT PULLEY 1

30 HANDLEBAR SCREW 1 77 FLYWHEEL 1

31 SCREW M5 * 12 mm 14 78 FLYWHEEL AXLE 1

32 3/8" WH NUT 2 79 BEARING (6003ZZ) 2

33 PEDAL (L/R) 1 80 BEARING IC1735-FT 1

34 CROSS FRAME(R) 1 81 WASHER ID30 OD34 (0.8mm) 1

35 ADAPTOR 1 82 BEARING (6000ZZ) 1

36 TURNING PLATE (R) 1 83 M10 WASHER (t=1mm) 1

37 3/8" NUT (t=3mm) 1 84 3/8" NUT (t=7mm) 1

38 TURNUNG PLATE COVER 2 85 CLIP C10(ID 9.1mm) 1

39 SADDLE SUPPORT TUBE INSERT 1 86 CROSS FRAME(L) 1

40 TURNING PEDAL (L) 1 87 BACK HANDLEBAR COVER 1

41 ROUND SCREW FOR ADJ.HEIGHT 2 88 FRONT HANDLEBAR COVER 1

42 M10 WASHER (t=2mm) 3 89 SCREW M3 * 12 mm 2

43 PLASTIC PAD 1 90 SCREW M5 * 10 mm 2

44 FIX PLATE 1

45 PLASTIC BUSH 2

Exploded Drawing

Assembly

ALL THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE

FACTORY.

STEP 1

Fasten Front Stabilizer (2) to the Base (1) using 2 x (4),

2 x (5), 2 x (6) and 2 x (7). Tighten with the spanner.

Note: It will help to place a piece of the polystyrene

packaging under the bike when assembling the

front stabilizer.

STEP 2

Fasten Front Stabilizer (2) to the Base (1) using 2 x (4), 2

x (5), 2 x (6) and 2 x (7). Tighten with the spanner.

Note: It will help to place a piece of the polystyrene

packaging under the bike when assembling the front

stabilizer.

STEP 3

Connect computer Upper Cable (14) to Computer

Lower Cable (15). A click can be felt when pushing

The two parts together. Insert the handlebar post

through the plastic cover and into the base and

attach it with 4 x (10), 4 x (6) and 4 x (5). Tighten

with the Allen key. Push plastic cover over the

Allen head bolt once tightened.

Step 4

Attach the Saddle Bracket (19A) to the Saddle Post holder

(18A).

Note: It may help to turn the saddle upside down.

Place it on a piece of plastic to protect it. Tighten

With the spanner.

Step 5

Insert the Saddle Post (16) into the Base. Align one of

the holes in the saddle post with the hole in the Base

and insert the Seat Knob (21) through the hole in the

Base into the hole in the Saddle Post. Tighten the Seat

Knob into the Base.

Step 6

Attach the Handlebar (27) to the Handlebar Post (13) and

secure with clamp, clamp decoration cover (87), star

handle screw (30) and washer (5) in your desired position.

Attach the handlebar cover (87+88)

with 2 screws M5x10mm (90).

Step 7

Attach the Computer Upper Cable (14) to the Computer

(22). A click can be felt when the Cable is attached.

Attach the Computer (22) to the Handlebar Post with 4 x

(23). Tighten with the screwdriver.

Step 8

Insert the Right Pedal (33) into the right arm of the Crank

assembly(34) and finger tighten in a clockwise direction

until the thread is fully inserted in the crank.

Repeat for the Left Pedal (33) finger tighten in an

anticlockwise direction. Tighten both with the spanner.

Step 9

Plug the Adaptor (35) into the rear of the bike and into the

main power, the console will beep when connected and

the power is turned on.

Well done !

Your bike is now ready for use. Please go to the computer operation section in this

manual for instructions on how to operate your console.

Computer Instruction

Rotation/ Minute (U/min)

Recovery -

to get fitness note

Start/ Stop - to start or pause

training by pressing the nut

Energy consumption

(cal.)

ZEIT (min; sec.)

EINGABE- to enter

training parameters

AB - to adjust data and

resistance by turning the

nut to left

Display for active Program

Level – display for active

resistance level (1~16)

Current Heart Rate

(BPM)

USER – to store user

personal data

GESCHWINDIGKEIT

(Km/h.)

Watt

Start or Stop

status

User no. 1~4

Display current

function value

Display active function

Display for active profile & resistance

STRECKE

(Km)

AUF - to adjust data and

resistance by turning the

nut to right

Inhaltsverzeichnis

Sprachen:

Andere Energetics Fitnessgeräte Handbücher

Energetics

Energetics VT 14.1 Bedienungsanleitung

Energetics

Energetics Light Bench 4.1 Bedienungsanleitung

Energetics

Energetics PR 3000p Bedienungsanleitung

Energetics

Energetics POWER RUN 5.0 Bedienungsanleitung

Energetics

Energetics Magnetic Treadmill 1.5 Bedienungsanleitung

Energetics

Energetics CT 421pa Bedienungsanleitung

Energetics

Energetics CT 870 PRO Bedienungsanleitung

Energetics

Energetics JE6461 Bedienungsanleitung

Energetics

Energetics IWM WS TS 825 Bedienungsanleitung

Energetics

Energetics ST 10.1 Bedienungsanleitung

Energetics

Energetics XT 430p Bedienungsanleitung

Energetics

Energetics TZ-2113 Bedienungsanleitung

Energetics

Energetics XT 950h Bedienungsanleitung

Energetics

Energetics PR 5400p Bedienungsanleitung

Energetics

Energetics CT 20 PRO Bedienungsanleitung

Energetics

Energetics XT 420p Bedienungsanleitung

Energetics

Energetics POWER RUN 14.9 Bedienungsanleitung

Energetics

Energetics MB 10 Bedienungsanleitung

Energetics

Energetics Deluxe Multi Gym 10.1 Bedienungsanleitung

Energetics

Energetics WR 1000 Bedienungsanleitung

Energetics

Energetics MG 10 Bedienungsanleitung

Energetics

Energetics E-101 Bedienungsanleitung

Energetics

Energetics 480 S Bedienungsanleitung

Energetics

Energetics XB 200p Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung