Equinox Systems Cabaret Colour HEX Bedienungsanleitung

Order code: EQLED037B

Cabaret Colour HEX

User Manual

www.prolight.co.uk Cabaret Colour HEX User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Before your initial start-up, please make sure that there is no damage caused during transportation.

• Should there be any damage, consult your dealer and do not use the equipment.

• To maintain the equipment in good working condition and to ensure safe operation, it is necessary

for the user to follow the safety instructions and warning notes written in this manual.

• Please note that damages caused by user modications to this equipment are not subject to warranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and

the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.

Do not endanger your own safety and the safety of others!

Incorrect installation or use can cause serious damage to people and/or property.

Please note: These xtures are intended for stage lighting and entertainment applications only, and are not intended for

extended periods of use, including but not limited to house-light, industrial or architectural applications and should only be

operated with short duty cycles.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Never let the power cable come into contact with other

cables. Handle the power cable and all mains voltage

connections with particular caution!

• Never remove warning or informative labels from the unit.

• Do not open the equipment and do not modify the unit.

• Do not connect this equipment to a dimmer pack.

• Do not switch the equipment on and off in short intervals,

as this will reduce the system’s life.

• Only use the equipment indoors.

• Do not expose to ammable sources, liquids or gases.

• Always disconnect the power from the mains when

equipment is not in use or before cleaning! Only handle

the power-cable by the plug. Never pull out the plug by

pulling the power-cable.

• Make sure that the available mains supply voltage is

between 100~240V AC, 50/60Hz.

• Make sure that the power cable is never crimped or

damaged. Check the equipment and the power cable

periodically.

• If the equipment is dropped or damaged, disconnect the

mains power supply immediately and have a qualied

engineer inspect the equipment before operating again.

• If the equipment has been exposed to drastic

temperature uctuation (e.g. after transportation),

do not connect power or switch it on immediately.

The arising condensation might damage the equipment.

Leave the equipment switched off until it has reached

room temperature.

• If your product fails to function correctly, stop use

immediately. Pack the unit securely (preferably in the

original packing material), and return it to your Pro Light

dealer for service.

• Only use fuses of same type and rating.

• Repairs, servicing and power connection must only be

carried out by a qualied technician. THIS UNIT CONTAINS

NO USER SERVICEABLE PARTS.

• This lighting xture is for professional use only - it is

not designed for or suitable for household use. The

product must be installed by a qualied technician in

accordance with local territory regulations. The safety of

the installation is the responsibility of the installer. The

xture presents risks of severe injury or death due to re

hazards, electric shock and falls.

• Warning! Risk Group 2 LED product according to

EN 62471. Do not view the light output with optical

instruments or any device that may concentrate the beam.

• WARRANTY: One year from date of purchase.

www.prolight.co.uk Cabaret Colour HEX User Manual 3

Product overview & technical specications

The Cabaret Colour HEX has been designed for entertainers on the go. The 36 six-colour LEDs are housed in an

ultra slim and lightweight housing with an adjustable bracket which can be used for hanging, stand mount and

oor applications. A 40° beam angleeasily covers wide areas with intense colours whilst the adjustable barn

doors help direct and focus the light. On board control options include auto, sound active and DMX.

• 36 x 8W six-colour LEDs (RGBWAUV)

• Beam angle: 40°

• 7,428 Lux @ 2m

• 11kHz refresh rate

• DMX channels: 3/3/6/8

or 11 selectable

• Static colour, colour mix,

colour change, colour fade,

sound active and master/slave

modes plus built-in programs

• 0 -100% dimming and variable strobe

• Bracket allows for multiple rigging

or oor standing applications

• 4 push button menu with LED display

• PowerCON input

• 3-Pin XLR input/output

• Fan cooled

• Barn doors included

Cabaret Colour HEX

Specications

Power consumption 291W

Power supply 100~240V, 50/60Hz

Fuse F5A 250V

Dimensions 326 x 449 x 104mm

Weight 6kg

Order code EQLED037B

410mm

430mm

30mm

449mm

155mm

104mm

220mm

326mm

0m 1m 2m 3m 4m 5m

40° - Lux

FULL ON

29712

6284

9012

1460

12680

3460

N/A

7428

1571

2253

365

3170

865

N/A

3302

698

1002

162

1409

385

N/A

40°

1857

393

563

793

216

N/A

118

251

361

507

138

N/A

www.prolight.co.uk Cabaret Colour HEX User Manual 4

Technical specications

01 - LED display

02 - Function buttons

03 - 3-Pin DMX input

04 - 3-Pin DMX output

05 - PowerCON input

06 - Fuse F5A 250V

07 - On/off switch

08 - Mounting bracket

09 - Mounting bracket

adjustment knobs

10 - Fan cooling vents

In the box: 1 x xture,

& 1 x power cable

04 03 05 06 07

www.prolight.co.uk Cabaret Colour HEX User Manual 5

Operating instructionsOperating instructionsOperating instructions

0 0 1

5 1 2

Addr

DMX address setting

F A i L

DMX signal fail

H o L d

b L a C

P r o G

S L a v

Slave mode

F s 0 0

F S 9 9

Colour mix mode

C o L o

r E d

G r E E

b L U E

U H I t

A N b E

u U

0 0 0

2 5 5

C H a N

3 C H

6 C H

3 C H 1

3 C H 2

8 C H

1 1 C H

Channel modes

P r o G

S P 0 1

S p 9 9

Colour fade mode

S P 0 1

S p 9 9

Colour change mode

S t a t

F A d E

C H A G

S o U n

C o 0 1

C o 2 5

Static colour mode

F A 0 1

F A 0 5

C G 0 1

C G 0 4

S E 0 0

S E 9 9

Sound active

www.prolight.co.uk Cabaret Colour HEX User Manual 6

DMX mode:

Operating in a DMX control mode environment gives the user the greatest exibility when it comes

to customising or creating a show. In this mode you will be able to control each individual trait of

the xture and each xture independently.

To access the DMX address mode, press the “MENU” button and use the “UP” and “DOWN” buttons to

show Addr on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons

to set the required DMX address. Press the “ENTER” button to conrm the setting. To exit out of any of

the above options, press the “MENU” button.

DMX channel mode:

To access the DMX channel mode, press the “MENU” button and use the “UP” and “DOWN” buttons

to show CHNd on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN”

buttons to choose one of the 3/3/6/8 or 11 DMX channel modes. Press the “ENTER” button to

conrm the setting. To exit out of any of the above options, press the “MENU” button.

Operating instructions

Channel Value Function

1 000-005 No function

006-015 Red

016-025 Green

026-035 Blue

036-045 Lime Green

046-055 Yellow Green

056-065 Yellow

066-075 Orange Yellow

076-085 Amber

086-095 Orange

096-105 Fuschia Pink

106-115 Magenta

116-125 Pink

126-135 Purple

136-145 Medium Blue

146-155 Cyan

156-165 Light Blue

166-175 Sky Blue

176-185 Turquoise

186-195 Mint Green

196-205 White (Blue tint)

206-215 White

216-225 Cool White

226-235 White (Pink tint)

3 channel mode 1:

Channel Value Function

1. cont 236-245 White (Yellow tint)

246-255 Warm White

2 000-005 No function

006-030 3 colour fade (RGB)

031-055 3 colour fade (CMY)

056-080 4 colour fade (RGBW)

081-105 7 colour fade (RGBWCMY)

106-130 3 colour fade in/out (RGB)

131-155 3 colour change (RGB)

156-180 3 colour change (CMY)

181-205 4 colour change (RGBW)

206-230 7 colour change (RGBWCMY)

231-255 Sound active

3 000-255 Program speed (slow-fast)/

Sensitivity (low-high)

Channel Value Function

1 000-255 Red dimmer (0-100%)

2 000-255 Green dimmer (0-100%)

3 000-255 Blue dimmer (0-100%)

3 channel mode 2:

www.prolight.co.uk Cabaret Colour HEX User Manual 7

Operating instructions

Channel Value Function

1 000-255 Red dimmer (0-100%)

2 000-255 Green dimmer (0-100%)

3 000-255 Blue dimmer (0-100%)

4 000-255 White dimmer (0-100%)

5 000-255 Amber dimmer (0-100%)

6 000-255 UV dimmer (0-100%)

7 000-255 Master dimmer (0-100%)

8 000-010 No function

011-255 Strobe (fast-slow)

8 channel mode:

Channel Value Function

1 000-255 Red dimmer (0-100%)

2 000-255 Green dimmer (0-100%)

3 000-255 Blue dimmer (0-100%)

4 000-255 White dimmer (0-100%)

5 000-255 Amber dimmer (0-100%)

6 000-255 UV dimmer (0-100%)

6 channel mode:

Channel Value Function

9 cont. 146-155 Cyan

156-165 Light Blue

166-175 Sky Blue

176-185 Turquoise

186-195 Mint Green

196-205 White (Blue tint)

206-215 White

216-225 Cool White

226-235 White (Pink tint)

236-245 White (Yellow tint)

246-255 Warm White

10 000-005 No function

006-030 3 colour fade (RGB)

031-055 3 colour fade (CMY)

056-080 4 colour fade (RGBW)

081-105 7 colour fade (RGBWCMY)

106-130 3 colour fade in/out (RGB)

131-155 3 colour change (RGB)

156-180 3 colour change (CMY)

181-205 4 colour change (RGBW)

206-230 7 colour change (RGBWCMY)

231-255 Sound active

11 000-255 Program speed (slow-fast)/Sensitivity

(low-high)

Channel Value Function

1 000-255 Red dimmer (0-100%)

2 000-255 Green dimmer (0-100%)

3 000-255 Blue dimmer (0-100%)

4 000-255 White dimmer (0-100%)

5 000-255 Amber dimmer (0-100%)

6 000-255 UV dimmer (0-100%)

7 000-255 Master dimmer (0-100%)

8 000-010 No function

011-255 Strobe (fast-slow)

9 000-005 No function

006-015 Red

016-025 Green

026-035 Blue

036-045 Lime Green

046-055 Yellow Green

056-065 Yellow

066-075 Orange Yellow

076-085 Amber

086-095 Orange

096-105 Fuschia Pink

106-115 Magenta

116-125 Pink

126-135 Purple

136-145 Medium Blue

11 channel mode:

www.prolight.co.uk Cabaret Colour HEX User Manual 8

Operating instructions

Master/slave mode:

The default setting for this xture is Master.

To set the unit as a slave, press the “MENU” button on the front of the master unit to show SLav

on the LED display. The unit is now in Slave mode.

To exit out of any of the above options, press the “MENU” button.

Please ensure that all slave units are set to the same DMX channel mode as the master unit.

DMX Signal Fail:

To access the DMX signal fail setting, press the “MENU” button and use the “UP” and “DOWN” buttons

to show FAiL on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN”

buttons to choose between HoLd (Hold), bLaC (Blackout) or ProG (Program mode).

Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Colour mix mode:

To access the colour mix mode, press the “MENU” button to show CoLo on the LED display.

Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose rEd.

Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the brightness of Red

between 000 ~ 255. Value: 000 - 255 (000 = LEDs off, 255 = high).

Now press the “MENU” button and repeat for GrEE Green, bLUE Blue, UHIt White,

ANbE Amber and uU UV.

Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the strobe speed between

FS00 ~ FS99. Value: 00 - 99 (00 = strobe off, 99 = fast).

Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Built-in programs:

To access the built-in programs, press the “MENU” button to show ProG on the LED display.

Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select one of the 5 built-in

programs (static colour, colour fade, auto, sound or strobe).

StAt - Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between

Co01 ~ Co25. Press the “ENTER” button to conrm the setting.

Co01 - Red

Co02 - Green

Co03 - Blue

Co04 - Lime Green

Co05 - Yellow Green

Co06 - Yellow

Co07 - Orange Yellow

Co08 - Amber

Co09 - Orange

Co10 - Fuschia Pink

Co11 - Magenta

Co12 - Pink

Co13 - Purple

Co14 - Medium Blue

Co15 - Cyan

Co16 - Light Blue

Co17 - Sky Blue

Co18 - Turquoise

Co19 - Mint Green

Co20 - White (Blue tint)

Co21 - White

Co22 - Cool White

Co23 - White (Pink tint)

Co24 - White

(Yellow tint)

Co25 - Warm White

www.prolight.co.uk Cabaret Colour HEX User Manual 9

Built-in programs (cont.):

FAdE - Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the fade program

between FA01 ~ FA05. Press the “ENTER” button and use the “UP” and “DOWN” buttons to select

the fade speed between SP01 ~ SP09. Press the “ENTER” button to conrm the setting.

(01 = slow speed, 09 = fast speed).

CHaG - Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the auto speed

between CG01 ~ CG04. Press the “ENTER” button to conrm the setting.

(01 = slow speed, 09 = fast speed).

SoUn - Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the sound

sensitivity between SE00 ~ SE99. Press the “ENTER” button to conrm the setting.

(00 = low sensitivity, 09 = high sensitivity).

Operating instructions

www.prolight.co.uk Cabaret Colour HEX User Manual 10

Setting the DMX address:

The DMX mode enables the use of a universal DMX controller. Each xture requires a “start address”

from 1- 512. A xture requiring one or more channels for control begins to read the data on the channel

indicated by the start address. For example, a xture that occupies or uses 7 channels of DMX and was

addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104,

105 and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in

the chain starts at 107.

DMX 512:

DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent

xtures and controllers. A DMX controller sends DMX data instructions form the controller to the xture.

DMX data is sent as serial data that travels from xture to xture via the DATA “IN” and DATA “OUT”

XLR terminals located on all DMX xtures (most controllers only have a data “out” terminal).

DMX linking:

DMX is a language allowing all makes and models of different manufactures to be linked together

and operate from a single controller, as long as all xtures and the controller are DMX compliant.

To ensure proper DMX data transmission, when using several DMX xtures try to use the shortest

cable path possible. The order in which xtures are connected in a DMX line does not inuence the

DMX addressing. For example; a xture assigned to a DMX address of 1 may be placed anywhere in

a DMX line, at the beginning, at the end, or anywhere in the middle. When a xture is assigned a

DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit,

no matter where it is located in the DMX chain.

DATA cable (DMX cable) requirements (for DMX operation):

This xture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit.

Your unit requires either a standard 3-pin or 5-pin XLR connector for data input/output,

see images below.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

Further DMX cables can be purchased from all good sound and lighting suppliers or Prolight Concepts dealers.

Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m3-Pin:

CABL185 – 2m CABL187 – 5m CABL188 – 10m5-Pin:

Setting the DMX address:

The DMX mode enables the use of a universal DMX controller. Each xture requires a “start address”

from 1- 512. A xture requiring one or more channels for control begins to read the data on the channel

indicated by the start address. For example, a xture that occupies or uses 7 channels of DMX and was

addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104,

105 and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in

the chain starts at 107.

DMX 512:

DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent

xtures and controllers. A DMX controller sends DMX data instructions form the controller to the xture.

DMX data is sent as serial data that travels from xture to xture via the DATA “IN” and DATA “OUT”

XLR terminals located on all DMX xtures (most controllers only have a data “out” terminal).

DMX linking:

DMX is a language allowing all makes and models of different manufactures to be linked together

and operate from a single controller, as long as all xtures and the controller are DMX compliant.

To ensure proper DMX data transmission, when using several DMX xtures try to use the shortest

cable path possible. The order in which xtures are connected in a DMX line does not inuence the

DMX addressing. For example; a xture assigned to a DMX address of 1 may be placed anywhere in

a DMX line, at the beginning, at the end, or anywhere in the middle. When a xture is assigned a

DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit,

no matter where it is located in the DMX chain.

DATA cable (DMX cable) requirements (for DMX operation):

This xture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit.

Your unit requires either a standard 3-pin or 5-pin XLR connector for data input/output,

see images below.

Also remember that DMX cable must be daisy chained and cannot be split.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Equinox Systems DJ-Equipment Handbücher

Equinox Systems

Equinox Systems EQLED12N Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED019 Bedienungsanleitung

Equinox Systems

Equinox Systems Butterfly Quad Bedienungsanleitung

Equinox Systems

Equinox Systems Helix 100W Gobo Flower Bedienungsanleitung

Equinox Systems

Equinox Systems Kaleido XP Bedienungsanleitung

Equinox Systems

Equinox Systems MoonPar Bedienungsanleitung

Equinox Systems

Equinox Systems Domin8R II Bedienungsanleitung

Equinox Systems

Equinox Systems FEVER Bedienungsanleitung

Equinox Systems

Equinox Systems SpectraPix Batten Bedienungsanleitung

Equinox Systems

Equinox Systems CARBON Bedienungsanleitung

Equinox Systems

Equinox Systems PRO DJ Booth LED Starcloth System Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED039A Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED138 Bedienungsanleitung

Equinox Systems

Equinox Systems Viper Bedienungsanleitung

Equinox Systems

Equinox Systems Scantastic 4 Bedienungsanleitung

Equinox Systems

Equinox Systems Spark Stream Bedienungsanleitung

Equinox Systems

Equinox Systems Pulse Tube Lithium Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED127 Bedienungsanleitung

Equinox Systems

Equinox Systems Hallucination Bedienungsanleitung

Equinox Systems

Equinox Systems Power Par 54 MKIII Bedienungsanleitung

Equinox Systems

Equinox Systems Quad Pix Batten Bedienungsanleitung

Equinox Systems

Equinox Systems Micro Batt EQLED160 Bedienungsanleitung

Equinox Systems

Equinox Systems Blitzer Strobe Bedienungsanleitung

Equinox Systems

Equinox Systems Beamtastic Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung