Equinox Systems Butterfly Quad Bedienungsanleitung

Order code: EQLED100

Buttery Quad

User Manual V2.0

www.prolight.co.uk Buttery Quad User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-

FULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageis

between100~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.



• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• Thislightingxtureisforprofessionaluseonly-itis

notdesignedfororsuitableforhouseholduse.The

productmustbeinstalledbyaqualiedtechnicianin

accordancewithlocalterritoryregulations.Thesafetyof

theinstallationistheresponsibilityoftheinstaller.The

xturepresentsrisksofsevereinjuryordeathduetore

hazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingto

EN62471.Donotviewthelightoutputwithoptical

instrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk Buttery Quad User Manual 3

Product overview & technical specications

TheButteryQuadisadynamicmulti-beameffectfeaturingtwosweepingLEDbars,eachloadedwithfour

individuallycontrollablenarrowbeams.Dispensingeightintenseandsharplong-throwbeamsthebutterycuts

throughtheairwithease.Thefourbuttonmenusystemallowscontrolofmaster/slavefunctions,andthexture

canbealsobeoperatedinsoundactiveandDMXmodes.

•8x12Wquad-colourLEDs

•Beamangle:4.5°

•Pixelmappingcapabilities

•DMXchannels:10or36selectable

•Auto,soundactiveandmaster/slavemodes

plusbuilt-inprograms

•0-100%dimmingandvariablestrobe

•Tilt:180°

•Quickreleaseomegaclampincluded

•4pushbuttonmenuwithLEDdisplay

•IECpowerinput/output

•3-PinXLRinput/output

Buttery Quad

Specications

Powerconsumption 100W

Powersupply 100~240V,50/60Hz

Fuse F5A250V

Dimensions 165x400x220mm

Weight 4.75kg

Ordercode EQLED100

400mm 165mm

220mm

www.prolight.co.uk Buttery Quad User Manual 4

Technical specications

01-Functionbuttons

02-LEDdisplay

03-DMXinputLED

04-PowerLED

05-SoundLED

06-MasterLED

07-FuseF5A250V

08-IECpowerinput

09-IECpoweroutput

10-3-PinXLRDMXinput

11-3-PinXLRDMXoutput

12-Microphone

13-Earthpoint

Inthebox:1 x xture,

1 x omega clamp,

1 x power cable

& 1 x user manual

07 08 09 1110 12

100-240V~50/60Hz

FUSE: F5A 250V

POWER IN POWER OUT

DMX INDMX OUT

MIC www.prolight.co.uk

MENU DOWN UP ENTER

POWER

DMX

SOUND

MASTER BUTTERFLY QUAD

01 02 05 06

www.prolight.co.uk Buttery Quad User Manual 5

Operating instructions

C h N d

1 0 C h

3 6 C h

S h N d

S h 0

S h 2 4

S o U n

o n

oFF

S e n S

100

b L N d

y e s

n o

t e S t

F h r S

u e r

r S e t

A d d r

512

DMX address setting

Channel mode

Show mode 0-24

Slave 1

S L N d

S L 1

S L 2

Sound active mode

Sound sensitivity

Blackout mode

L e d

o n

oFF

LED display on

LED display off

d 1 S P

n o

y e s

Normal

Inversion

1 t 1 L

y e s

n o

Tilt 1 inversion

2 t 1 L

y e s

n o

Tilt 2 inversion

Reset

Firmware version

Fixture hours

Auto test

N a S t

Master mode

Slave 2

1Ch

www.prolight.co.uk Buttery Quad User Manual 6

Operating instructions

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes

tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthe

xtureandeachxtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshowAddr

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe

requiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

ToaccesstheDMXchannelmode,pressthe“MENU”buttononthefrontoftheunittoshowChNd

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

oneofthe1/10or36DMXchannelmodes.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

10 channel mode:

1 channel mode:

Channel Value Function

CH1 000-255 Tilt1Movement(60°-150°)

CH2 000-255 Tilt2Movement(60°-150°)

CH3 000-255 Masterdimmer(0-100%)

CH4 000-009 Nofunction

010-255 Strobe(slow-fast)

CH5 000-255 Red(0-100%dimming)

CH6 000-255 Green(0-100%dimming)

CH7 000-255 Blue(0-100%dimming)

CH8 000-255 White(0-100%dimming)

CH9

000-007 Nofunction

008-017 Program1

018-027 Program2

028-037 Program3

038-047 Program4

048-057 Program5

058-067 Program6

068-077 Program7

078-087 Program8

088-097 Program9

Channel Value Function

CH1

000-007 Nofunction

008-128 Soundactive

129-255 Automode

CH9

098-107 Program10

108-117 Program11

118-127 Program12

128-136 Program13

137-146 Program14

147-156 Program15

157-166 Program16

167-176 Program17

177-186 Program18

187-196 Program19

197-206 Program20

207-216 Program21

217-226 Program22

227-236 Program23

237-246 Program24

247-255 Program25

CH10 0-255 Programspeed(slow-fast)

www.prolight.co.uk Buttery Quad User Manual 7

Operating instructions

Master/slave mode:

Tosetthemasterunit,pressthe“MENU”buttononthefrontofthemasterunittoshowSLNd onthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseNast.

Pressthe“ENTER”buttontoconrmthesetting.Thenselectyourdesiredprogram(soundactive,DMX

oroneofthebuilt-inprograms).

Tosettheotherunitsinslavemode,pressthe“MENU”buttononthefrontoftheunittoshowSLNd

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

eitherSL1(Slave1)orSL2(Slave2).Pressthe“ENTER”buttontoconrmthesetting.Theunitwill

nowruninsequencewiththemasterunit.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Show mode (built-in programs):

Toaccesstheshowmodes,pressthe“MENU”buttononthefrontoftheunittoshowShNd

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosethe

showyourequirefromSh 0~Sh24.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.



36 channel mode:

Channel Value Function

CH1 000-255 Tilt1Movement(60°-150°)

CH2 000-255 Tilt2Movement(60°-150°)

CH3 000-255 Masterdimmer(0-100%)

CH4 000-009 Nofunction

010-255 Strobe(slow-fast)

CH5 000-255 LED1Red(0-100%dimming)

CH6 000-255 LED1Green(0-100%dimming)

CH7 000-255 LED1Blue(0-100%dimming)

CH8 000-255 LED1White(0-100%dimming)

CH9 000-255 LED2Red(0-100%dimming)

CH10 000-255 LED2Green(0-100%dimming)

CH11 000-255 LED2Blue(0-100%dimming)

CH12 000-255 LED2White(0-100%dimming)

CH13 000-255 LED3Red(0-100%dimming)

CH14 000-255 LED3Green(0-100%dimming)

CH15 000-255 LED3Blue(0-100%dimming)

CH16 000-255 LED3White(0-100%dimming)

CH17 000-255 LED4Red(0-100%dimming)

CH18 000-255 LED4Green(0-100%dimming)

CH19 000-255 LED4Blue(0-100%dimming)

CH20 000-255 LED4White(0-100%dimming)

CH21 000-255 LED5Red(0-100%dimming)

CH22 000-255 LED5Green(0-100%dimming)

CH23 000-255 LED5Blue(0-100%dimming)

CH24 000-255 LED5White(0-100%dimming)

CH25 000-255 LED6Red(0-100%dimming)

CH26 000-255 LED6Green(0-100%dimming)

CH27 000-255 LED6Blue(0-100%dimming)

CH28 000-255 LED6White(0-100%dimming)

CH29 000-255 LED7Red(0-100%dimming)

CH30 000-255 LED7Green(0-100%dimming)

CH31 000-255 LED7Blue(0-100%dimming)

CH32 000-255 LED7White(0-100%dimming)

CH33 000-255 LED8Red(0-100%dimming)

CH34 000-255 LED8Green(0-100%dimming)

CH35 000-255 LED8Blue(0-100%dimming)

CH36 000-255 LED8White(0-100%dimming)

www.prolight.co.uk Buttery Quad User Manual 8

Sound active mode:

Toaccessthesoundactivemode,pressthe“MENU”buttononthefrontoftheunittoshowSoUn

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe

soundmodeonoroff.Pressthe“ENTER”buttontoconrmthesetting.

Toadjustthesoundsensitivity,pressthe“MENU”buttononthefrontoftheunittoshowSens

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe

soundsensitivity0~100.Pressthe“ENTER”buttontoconrmthesetting.

Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity)

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk Buttery Quad User Manual 9

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

www.prolight.co.uk Buttery Quad User Manual 10

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterference.itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Equinox Systems DJ-Equipment Handbücher

Equinox Systems

Equinox Systems Fusion 140 Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED12B Bedienungsanleitung

Equinox Systems

Equinox Systems Helix 100W Gobo Flower Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED064 Bedienungsanleitung

Equinox Systems

Equinox Systems FEVER Bedienungsanleitung

Equinox Systems

Equinox Systems Midas Spot Bedienungsanleitung

Equinox Systems

Equinox Systems Triton Beam EQLED071 Bedienungsanleitung

Equinox Systems

Equinox Systems Ultra LED Scan EQLED75 Bedienungsanleitung

Equinox Systems

Equinox Systems Helix Scan XP 150W Scanner Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED039A Bedienungsanleitung

Equinox Systems

Equinox Systems Twin Shot MKII Electric Confetti Launcher Bedienungsanleitung

Equinox Systems

Equinox Systems Fusion 50 MKIII Bedienungsanleitung

Equinox Systems

Equinox Systems MicroPar UV EQLED028 Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED082 Bedienungsanleitung

Equinox Systems

Equinox Systems MaxiPar Quad Bedienungsanleitung

Equinox Systems

Equinox Systems SpectraPix Batten Bedienungsanleitung

Equinox Systems

Equinox Systems HYPE Bedienungsanleitung

Equinox Systems

Equinox Systems Waterwave XP Bedienungsanleitung

Equinox Systems

Equinox Systems Graphix Bedienungsanleitung

Equinox Systems

Equinox Systems Viper Bedienungsanleitung

Equinox Systems

Equinox Systems Crossfire XP Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED135 Bedienungsanleitung

Equinox Systems

Equinox Systems Pulse Tube Bedienungsanleitung

Equinox Systems

Equinox Systems Domin8R II Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung