8
Complete programming chart
D1 D2 Parameter D3 D4 Preset option Options or values
C1Motor turning direction 01x
02
4Opening safety device (photocell or strip) 00xDevice not installed
10 Device without testing
11 Device with testing
5Closing safety device (photocell or strip)
Closing photocell with C520 or C521, also
prevents the start of gate opening
00xDevice not installed
10 Device without testing
11 Device with testing
20 Device without testing
21 Device with testing
8Radio receiver 01 RSD card (non-decoding)
02xTwin-channel decoder card
P1Total opening radio code programming oç
2Pedestrian opening radio code programming oç
3Gate travel programming oç
F1Functioning mode 01 Automatic
02xStep-by-step
2Standby in automatic mode 0...5ÿ 0...915 59= 59 sec.; 2ÿ5 = 2 min. 50 sec, etc
3Pedestrian opening 00xPedestrian opening is not carried out
10 10% of total opening
20 20% of total opening
30 30% of total opening
40 40% of total opening
50 50% of total opening
A0Flashing light 01xNo pre-warning
02 With pre-warning
1Garage light time 0...5ÿ 0...903 59= 59 secs; 2ÿ5 = 2 min. 50 secs, etc
2Gate speed 01...503 01: minimum speed;
05: maximum speed
3Slow down speed 01...503 01: minimum speed;
05: maximum speed
4Slowdown distance 00...503 00: minimum distance;
05: maximum distance
5Reverse after closing (to offset the expansion
of the gate)
A50x: stops in selected position without
making contact
A51x: makes contact and reverses back to
the selected position
0...10...904 x0: no reverse;
x9: maximum reverse
6Maximum force 0...10...908 01: minimum force; 10: maximum force
7Closing photocell used during standby (in
automatic mode only)
01 Immediate close
02xRestart standby time
03 Has no effect
8Pushbutton operation during standby (in
automatic mode only)
01 Immediate close
02xRestart standby time
03 Has no effect
9Opening mode 01xOpening in accordance with the mode
selected in the main functions (F)
02 Collective opening (the control board
does not obey the key commands during
opening)
03 Step-by-step opening (the gate stops if
a key device is activated during opening.
The gate closes when operated again)
ç1Operations carried out XX Indicates the hundreds of cycles
completed (for example, 68 indicates
6,800 cycles completed)
