EverFocus IRONGUARD 16 POE Bedienungsanleitung

IRONGUARD 16 POE

16CH, H.265, 8MP NVR

Quick Installation Guide

Release Date: July 2019

All the images including product pictures or screen shots in this document are for example only. The

images may vary depending on the product and software version. Information contained in this

document is subject to change without notice.

EverFocus Taiwan:

2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan

TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw [email protected].tw

1. Overview

1.1 Front Panel

No.

Name

Description

IR Receiver

Receiver for signals from the IR remote control.

2 LED Indicator

Power: When power is on, the LED will continue lighting in green.

HDD: When power is on, the LED will continue lighting in red. When

HDD is reading/writing data, the LED will flashes red.

3 USB2.0 Port USB2.0 port for connecting to a mouse or an external storage device.

1.2 Rear Panel

68910 11

No.

Name

Description

1 Audio Input

Connects to audio input devices, such as microphones. Note that the

microphones with a (built-in) amplifier and external power supply are

required.

2 Audio Output

Connects to an audio output device, such as speakers. Note that the

speakers with a (built-in) amplifier and external power supply are

required.

3 VGA Port

Connects to a monitor using a VGA cable.

e-SATA

Connects to an external e-SATA storage device.

5 Video Input

LAN (PoE) ports for connecting to the IP cameras.

6 WAN

Connects to the Network.

HDMI Port

Connects to a monitor using a HDMI cable.

8 USB 2.0 Port

USB 3.0 Port USB ports for connecting to a mouse or external storage device.

9 Terminal

Block

The Terminal Block provides alarm inputs, alarm output and RS-485

connection (see 3.1 Terminal Block).

10 Power Port

Connects to a 12VDC power source.

11 Power Switch

Press to turn on or off the power.

1.3 Packing List

•NVR x 1

•Power Cord x 1

•Mouse x 1

•

HDD Screw x 8

•

Quick Installation Guide x 1

•CD x 1 (see Note 3)

•IR Remote Control (with 2 AAA batteries) x 1 (see

Note 4)

Note:

1. Equipment configurations and supplied accessories vary by country. Please consult your

local EverFocus office or agents for more information. Please also keep the shipping carton

for possible future use.

2. Contact the shipper if any items appear to have been damaged in the shipping process.

3. The CD contains the IP Utility software, User Manual and Quick Installation Guide.

4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions.

a. Use only two AAA dry cell batteries.

b. Do not dispose of the batteries in a fire as it may explode.

1.4 Dimensions

Front View Side View

375mm / 14.76"

45mm / 1.77"

320mm / 12.6"

2. Basic Installation

2.1 Hard Disk Installation

You can install two 3.5” HDDs inside the NVR for recording videos. The maximum capacity of

each HDD is 8TB.

1. Make sure the NVR is power-off.

2. Unscrew the eight housing screws (4 on the rear panel, 2 on the left and right side each). To

remove the housing cover from the NVR, push the cover backward and then lift it.

3. Find the SATA cable inside the NVR, and connect the SATA cable to the SATA port on the HDD

(left image). Find the internal power cable, and connect the internal power cable to the HDD

(right image).

4. Place the HDDs inside the NVR, screw the HDDs from the bottom side of the NVR using the

supplied Screws.

5. Screw the housing cover back to the NVR.

2.2 Hard Disk Compatibility List

Please go to the product page (Download) on EverFocus’ Website www.everfocus.com.tw to see

the latest Storage Compatibility List. It’s recommended to use the hard disk models listed on the

Storage Compatibility List to ensure your hard disks are compatible.

Note: If using two hard disks, it’s recommended to choose the hard disks with the same

capacity.

3. Basic Connection

Line Level

Audio Out

Line Level

Audio Input

IP Cameras

Main Monitor

(VGA)

Main Monitor

(HDMI)

Power Cord

Mouse / USB Storage

Web Remote Client

IP Cameras

Network

EverFocus CMS

3.5" HDD

678

1. To record videos, install 3.5” HDD(s) to the NVR. Please refer to 2.1 Hard Disk Installation.

2. To connect to the IP cameras, connect the cameras to the LAN (PoE) ports.

3. To view videos at local site, connect a monitor to the HDMI or VGA port using the HDMI or

VGA cable supplied by the monitor manufacturer.

4. Connect microphones to the audio input ports to transmit audio from the NVR to the remote

sites (Web browser of NVR, eFVMS App or EverFocus CMS). Note that the microphones with

a (built-in) amplifier and external power supply are required.

5. To listen to the audio from IP cameras or remote sites, connect speakers to the audio output.

Note that the speakers with a (built-in) amplifier and external power supply are required.

6. Use a standard RJ-45 CAT5 Ethernet cable to connect the NVR to the network.

7. Optionally connect a mouse to the NVR to control the system. You can also control the

system using the supplied IR Remote Control.

8. Use the supplied Power Cord to connect the NVR to the power outlet.

3.1 Terminal Block

Alarm Input: 16

Alarm Output: 1

RS-485: 1

Alarm

1615

OUT

COM

RS485

G10987

654

GGG

4. Turning On / Off the Power

Before powering on the NVR, please make sure the internal HDD have been installed properly.

Once you have completed the basic cable connections, you are ready to turn on the NVR.

Simply plug in the power source and then press the Power Switch on. The POWER LED will light

up if power is normal and the NVR will enter the System Initialization process.

When the process is done, it’s required to set up a password for the administrator account

immediately in order to protect your privacy.

To turn off the power, click the Shutdown button on the Exit page (OSD menu > Exit >

Shutdown) and then press the Power Switch on the rear panel of the NVR.

Note: If you forget the password when login, you can try the following instructions:

•If you have pre-configured the email settings, you can just click “Forget Password” on the

email address.

•If you have never configured the email settings, please mail the MAC Address, Serial

Number and the Model Name to ts@everfocus.com.tw to get a temporary password.

5. P2P Function

The P2P function allows users to add NVRs to EverFocus’ eFVMS App through QR code.

1. Install EverFocus eFVMS App. For Android users, go to Google Play Store. For iOS users, go to

Apple Store. After the installation process is complete, start eFVMS App.

EverFocus eFVMS eFVMS by EverFocus

2. To add a NVR through P2P, tap Menu > Device List, and then tap the “+” button on the

upper-right corner.

3. Scan the NVR’s QR code on the System Info page of the NVR OSD menu. Input the NVR ID,

password and Media Port 8000. Tap the Save button.

……

4. The NVR is now added and connected to the App. You can start accessing the NVR.

IRONGUARD 16 POE

P/N: 4605NVI5202001B

Inhaltsverzeichnis

Andere EverFocus DVR Handbücher

EverFocus

EverFocus EDSR 400F Bedienungsanleitung

EverFocus

EverFocus eZ.HD ELUX4 Bedienungsanleitung

EverFocus

EverFocus EDR410M Bedienungsanleitung

EverFocus

EverFocus ECOR264-4D1 Bedienungsanleitung

EverFocus

EverFocus EPHD08 Bedienungsanleitung

EverFocus

EverFocus PARAGON Series Bedienungsanleitung

EverFocus

EverFocus eZ.HD PARAGON FD 16x4 Bedienungsanleitung

EverFocus

EverFocus EDVR16D1/250 Bedienungsanleitung

EverFocus

EverFocus EDR810H Bedienungsanleitung

EverFocus

EverFocus Paragon 264 Series Bedienungsanleitung

EverFocus

EverFocus EDSR100M Bedienungsanleitung

EverFocus

EverFocus EDSR100H Bedienungsanleitung

EverFocus

EverFocus Nevio ENVS1600 Bedienungsanleitung

EverFocus

EverFocus PARAGON264x4--32CH Series Bedienungsanleitung

EverFocus

EverFocus Paragon 264X4 32CH Bedienungsanleitung

EverFocus

EverFocus ECOR264-D2 DVR Series Bedienungsanleitung

EverFocus

EverFocus PARAGON Bedienungsanleitung

EverFocus

EverFocus ECOR Series Bedienungsanleitung

EverFocus

EverFocus EDR410M Bedienungsanleitung

EverFocus

EverFocus ECOR264-D2 DVR Series Bedienungsanleitung

EverFocus

EverFocus EMV401 Bedienungsanleitung

EverFocus

EverFocus EPHD04+ HDcctv Bedienungsanleitung

EverFocus

EverFocus ECOR Series Bedienungsanleitung

EverFocus

EverFocus ECOR Series Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung