Extron electronics StudioStation 100 Bedienungsanleitung

StudioStation100 • Setup Guide

The Extron StudioStation100 Streaming Media Processor is a compact, high denition recording and streaming device for

professional AV systems. It records MP4, M4A or M4V les of full screen HDMI video channel with mixed audio, and metadata.

It also supports live streaming at different resolutions and bitrates from the recording. The StudioStation100 ts in presentation

recording, lecture capture, and enterprise training applications. It is ideal for installation beneath conference tables and in

lecterns. A RCP 101 remote control panel can be installed together with the StudioStation100 to offer record controls and an

additional USB storage option.

This guide provides instructions for an experienced installer to set up and operate this streaming media processor. For full

installation, conguration, and operation details, see the StudioStation100 User Guide, available at www.extron.com.

Mount the StudioStation100

The StudioStation100 is housed in a 1U high, half rack width metal enclosure that can sit on a table with the provided rubber feet

or mounted in a rack or under a table. Select a suitable mounting location, then choose an appropriate mounting option. Before

connecting the StudioStation100, turn off all devices that will be connected and then make all external device connections to the

StudioStation100 before applying power to the devices.

Rear Panel Overview

RxTx G

RS-232 CONTROL

RESET

+12V

1.0A MAX

INPUTS OUTPUT REMOTE

StudioStation 100

100-240V 0.7A

50-60 Hz LAN

USB STORAGE

HDMI HDMI

AUDIO

LINE R

BDEFGHI

Figure 1. StudioStation100 Rear Panel

A100-240 VAC IEC power inlet FRS-232 port for Simple Instruction Set (SIS™) control

BUSB type A port for external storage device and activity LED GUSB type A port for remote control panel RCP 101

CHDMI input H12V external power output to RCP 101

DAnalog stereo audio input IReset button and LED

EHDMI preview output JRJ-45 Ethernet LAN port

Power Connection

A100-240 VAC power inlet – Connect the provided IEC cord. Verify the front panel buttons and LCD illuminate (see Front

Panel Features on page3).

NOTE: Make all external device connections to the StudioStation100 before applying power to the devices.

Control System and External Device Connections

The StudioStation100 can be congured and controlled from the rear panel RS-232 captive screw port (see gure 1, F), the

front panel mini USB B Cong port (see ﬁgure 3, Con page 3), or the LAN port ( see gure 1, J) using SIS commands

and DataViewer. It can also be congured and controlled using a standard web browser from the LAN port (via telnet port 23).

Because the LAN port must be connected for streaming output, Extron recommends using it for conguration, control, and

rmware upgrades.

BUSB storage device and LED — Connect an optional external USB storage device to save recorded les. The activity LED

indicates the status of the USB port and blinks during recording. The storage device can be any standard external hard drive

or USB ash drive formatted with a compatible le system.

NOTE: The StudioStation100 can detect and record to USB storage devices using FAT32, VFAT long file name

extensions, EXT2, EXT3, EXT4 file system, or NTFS-formatted storage volumes.

StudioStation 100 • Setup Guide (Continued)

FRemote — To control the StudioStation100 using SIS commands over RS-232, connect the host RS-232 cable to

the rear panel (see the illustration at right) with a 3-pole captive screw connector for bidirectional serial host control

(see ﬁgure 1 on the previous page).

The default protocol for this port:

• 9600 baud • no parity • 8 data bits • 1 stop bit • no ow control (handshaking)

GRemote control port — Connect the StudioStation 100 with the RCP 101 EU/MK or decorator-style wallplate using

a female type A USB connector. The RCP 101 has a USB Storage port, which provides an additional recording

location.

H12V external power output — Connect the RCP101 to the StudioStation100 using a 2-pin, blue captive screw

connector. The 12V power is required to power an RCP101 remote control.

IReset button and LED — The StudioStation100 has several reset modes to return user-dened conguration

settings or all settings back to factory defaults. The LED blinks to indicate the desired reset mode, and provides the

reset status during the reset operation. For information on selecting the reset mode, see the StudioStation100 User Guide at

www.extron.com.

JRJ-45 Ethernet LAN port — Use a standard Ethernet cable to connect to a network. The

table at right has the default network settings.

Input Connections

CHDMI input – Connect an HDMI (or DVI with a suitable adapter) source device to the input.

DAnalog audio input – Connect a balanced or unbalanced stereo line level audio device to this 5-pole 3.5 mm captive screw

input. Wire the connector as shown in gure 2.

Unbalanced Stereo InputBalanced Stereo Input

(high impedance)(high impedance)

Do not tin the wires!

Tip

Sleeve

Tip

Left

Right

Tip

Slee

ve(s)

Ring

Tip

Left

Right

Figure 2. Audio Input Captive Screw Connector Wiring

ATTENTION:

• The length of the exposed wires in the stripping process is important. The ideal length is 3/16 inch (5 mm). If

longer, the exposed wires may touch, causing a short circuit between them. If shorter, the wires can be easily

pulled out even if tightly fastened by the captive screws.

• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les dénuder. La longueur idéale est de

5mm (3/16inches). S’ils sont un peu plus longs, les câbles exposés pourraient se toucher et provoquer un court

circuit. S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont attachés par les vis captives.

• Do not tin the wires. Tinned wires are not as secure in the captive screw connector and could pull out.

• Ne pas étamer les câbles. Les câbles étamés ne sont pas aussi bien xés dans les connecteurs des à vis captives

et pourraient sortir.

Output Connections

EHDMI preview output – Connect an HDMI (or DVI with a suitable adapter) display device to this HDMI output

(see ﬁgure 1 on page 1). The preview output switches between the record preview content and the internal browser using

an attached USB keyboard and mouse (optional), which can be connected to either the front panel or rear panel USB ports.

IP Address: 192.168.254.253

Subnet Mask: 255.255.0.0

Default Gateway: 0.0.0.0

DHCP: OFF

Ground

Receive

Transmit

Tx Rx

RS-232

REMOTE

Front Panel Features

StudioStation 100

INPUT OUT

HDCP

HDMI

HDMILINE HDMI

CLIP

AUDIO

CONFIG

USB STORAGE

ALARM

MARK

Figure 3. StudioStation100 Front Panel

APower LED —

• Solid Green —The power is on and the unit is operational.

• Blinking green —The power is on but the unit is still booting (not operational).

BAlarm LED —Lights red when one or more alarms are triggered (see the StudioStation 100 User Guide for all alarms).

CConfig port —Connect a control device to this port with a USB mini-B cable (not supplied). Use this port to send SIS

commands to the StudioStation100 for device conguration and control.

NOTE: For information on using this port for device configuration and control and for a list of available SIS commands,

see the StudioStation100 User Guide at www.extron.com.

DUSB storage port and activity LED —Connect a USB compatible media device to this port. The LED indicates the USB

port status and blinks during both reading and writing. The storage device can be any standard external hard drive or USB

ash drive formatted with a compatible le system.

NOTE: The StudioStation100 can detect and record to USB storage devices using FAT32, VFAT long file name

extensions, EXT2, EXT3, EXT4 file system, or NTFS-formatted storage volumes.

EHDMI LED —Lights green when HDMI video input sync is detected.

FHDCP LED —Lights green when HDCP content is detected.

GAudio Signal and Clip LEDs —

• Audio Input Indicators – Red (signal clipping) and green (signal present) LEDs for HDMI and line input channels.

• Audio Output Indicators – Red (signal clipping) and green (signal present) LEDs for the output channel.

For both the Audio Input and Audio Output indicators, the green signal LED varies in brightness corresponding to the

input signal level. It begins to light at – 60 dBFS increasing to full intensity corresponding to signal level increases. When

the signal level reaches – 3 dBFS or above, the red clipping LED lights and remains lit as long as the signal remains

above – 3 dBFS. When it falls below that level, the red LED remains lit briey, after which the display resumes real-time

monitoring of the signal level.

HRecord controls with LED indicators —Record, Stop, Pause, and Mark indicate the current state of record operation:

• Record —Press to record. The red record button lights steadily during active recording.

• Stop —Press to stop the active recording. When pressed during a recording, the green stop button blinks while the

recorded le is being nalized, then lights steadily when the le is nalized.

• Pause —Press to pause recording. When pressed, the green Pause button blinks to indicate video recording is

paused. Press Record or press Pause to resume recording or Stop to halt the recording.

• Mark —Press MARK to place a chapter marker in the recorded le. When pressed during recording, the green Mark

button blinks momentarily to indicate a chapter marker is inserted. The button also illuminates when JPG thumbnails are

automatically created at 5 minute intervals by default.

StudioStation 100 • Setup Guide (Continued)

Powering Up

When power is applied to the unit, the StudioStation 100 undergoes a self-testing sequence. The power LED starts blinking green

when the power is connected but the unit is still booting. The green LEDs in the input and output section of the front panel light

and the record controls buttons light amber.

To Record a File from the Front Panel

The StudioStation100 creates MP4, M4A, or M4V media les. Recordings can be stored to the 32 GB SD card internal storage,

or to recording media connected to the front, rear, or RCP 101 USB Storage ports. When Secondary Recording is enabled, the

recordings can be stored to two locations. The recording location defaults to internal storage, and is the Primary Recording

destination in Secondary Recording mode (see the Web‑Based User Interface section of the StudioStation100 User Guide for

more information).

The internal 32GB SD card is eld upgradable to different storage sizes. For instructions to replace the SD card, see the

StudioStation100UserGuide at www.extron.com.

To configure an ad hoc recording:

1. Press the front panel Record button.

2. Monitor the record time and remaining time on the embedded web page.

3. Press Pause to temporarily suspend recording. Press Pause again or Record to resume the recording and place a chapter

marker on the le.

4. Press Mark to create a chapter marker and a thumbnail if desired.

5. Press Stop to cease recording and place an end-of-le marker on the recording.

To upload a recording to a server share folder:

Files recorded to internal memory can also be uploaded automatically (after the recording completes) to a server (Entwine), or

shared folder via FTP, SFTP, or CIFS (see the StudioStation100Help File for instructions).

Encoder Presets

Encoder presets allow switching between various encoder proles based on resolution and bitrates. There are 16 encoder presets

including eight pre-dened (1 through 8 in the table below) that cover common encoder congurations. Encoder presets can be

saved or recalled from the internal webpage (Conguration > Encoding &Metadata > Encoding Presets).

Preset

Number

Preset

Name

Resolution Video

Bitrate

(Kbps)

Frame

Rate (fps)

Audio

Bitrate

(Kbps)

Mode GOP

Length

H.264

Proﬁle

H.264

Level

1 1080p High 1920x1080 8000 30 320 VBR 30 High 4.1

2 1080p Low 1920x1080 6000 15 128 CVBR 30 Main 3.1

3* 720p High 1280x720 5000 30 192 VBR 30 High 3.1

4 720p Low 1280x720 3000 15 128 CVBR 30 Main 3.1

5 480p High 848x480 2500 30 128 VBR 30 High 3.1

6 480p Low 848x480 1500 15 80 CVBR 30 Main 3.1

7 VGA High 1280x1024 3500 30 128 VBR 30 High 4.1

8 VGA Low 1024x768 2500 15 128 VBR 30 High 3.1

NOTES: *Preset 3 is the default value for recording and streaming.

Streaming

The StudioStation 100 supports simultaneous recording and streaming. Each can have a different resolution, frame rate, and

bitrate. The default is Pull, unicast RTP/UDP.

NOTE: A preview stream on the web-based UI is video-only (no audio).

To decode the streams:

To view the preview stream, go to the embedded webpage AV Controls Panel. StudioStation 100 streams can also be

decoded using an Extron SMD202 decoder or compatible third party players such as VLC and QuickTime.

Streaming Presets

Streaming presets allow switching between various streaming proles. There are 16 presets that can be saved or recalled from the

internal webpage (Conguration > Encoding &Metadata > Encoding Presets).

Recording Proﬁles

There are 16 proles which save metadata and recording le type. They can be saved or recalled from the internal webpage.

(Conguration > Encoding &Metadata > Metadata and Recording Proles).

Access Internal Content

The StudioStation100 has internal memory reserved for local content. Internal content is viewed from the web-based user

interface Files Management tab (see the StudioStation100 User Guide or the StudioStation100Help File at www.extron.com

for complete instructions).

Recording folders and les can be transferred directly from the StudioStation100 to a computer on the same network using

an SFTP client such as Filezilla, a free FTP program. Connect to the StudioStation100 at sftp://<StudioStation 100

IP>:22022. Log in using admin or user credentials (see the StudioStation100 User Guide at www.extron.com for more

information).

About the Web-based User Interface

The web-based user interface can view, congure, and control the StudioStation100 with a PC from the LAN port using a

standard web browser. This section details how to access the web-based user interface. For more information on using the

web-based user interface, see the StudioStation100 User Guide available on the Extron website or click the help le button (

in the top right corner, to open the StudioStation100 Help File.

Accessing the Web-based User Interface

Extron Headquarters

+1.800.633.9876 (Inside USA/Canada Only)

Extron USA - West Extron USA - East

+1.714.491.1500 +1.919.850.1000

+1.714.491.1517 FAX +1.919.850.1001 FAX

Extron Europe

+800.3987.6673

(Inside Europe Only)

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Extron China

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.299.1800

+971.4.299.1880 FAX

Extron Australia

+61.8.8113.6800

+61.8.8351.2511 FAX

Extron India

1800.3070.3777

(Inside India Only)

+91.80.3055.3777

+91.80.3055.3737 FAX

05 17

NOTE: The StudioStation 100 can be accessed in Windows using Microsoft®Internet Explorer®version 10 or higher, Mozilla®

Firefox®(version 35 or higher), or Google®Chrome™(version 37 or higher), and on a Mac®OS®platform (Mac OS X or

higher) using Safari®(version 8 or higher) (see the StudioStation100 User Guide for current compatibility).

Open a web browser on the control computer and enter the IP address of the StudioStation100 into the address bar (the default

IP address for example, http://192.168.254.253). Press <Enter>. The default user interface page opens to the Device

Status page.

The AV Controls panel on the left remains open unless closed by the user. It provides recording controls, input mute settings,

and displays an audio output level meter. The Device Status page displays input and stream information, current events, and

storage. Click the help le button (

) in the top right corner of the various pages and tabs within the Web-based User Interface

to open the StudioStation100 Help File for more information.

Andere Handbücher für StudioStation 100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Extron electronics Computerhardware Handbücher

Extron electronics

Extron electronics Dual Window Multi-Graphic Processor MGP 462D Bedienungsanleitung

Extron electronics

Extron electronics EDID 101H 4K PLUS Bedienungsanleitung

Extron electronics

Extron electronics AXP 50 C AT Bedienungsanleitung

Extron electronics

Extron electronics Scalable Multi-Graphic Videowall Processors MGP 464W... Bedienungsanleitung

Extron electronics

Extron electronics HAE 100 4K Bedienungsanleitung

Extron electronics

Extron electronics DMP 128 Plus Bedienungsanleitung

Extron electronics

Extron electronics Annotator 300 Bedienungsanleitung

Extron electronics

Extron electronics UCS FT 901 Bedienungsanleitung

Extron electronics

Extron electronics IPCP Pro PCS1 Bedienungsanleitung

Extron electronics

Extron electronics DTP3 T/R 301 Bedienungsanleitung

Extron electronics

Extron electronics Quantum Ultra Series Bedienungsanleitung

Extron electronics

Extron electronics Network Device PIP 444 Bedienungsanleitung

Extron electronics

Extron electronics IPCP Pro Series Bedienungsanleitung

Extron electronics

Extron electronics DVI Output Card Bedienungsanleitung

Extron electronics

Extron electronics AXP 64 C AT Bedienungsanleitung

Extron electronics

Extron electronics IPCP Pro PCS1 xi Bedienungsanleitung

Extron electronics

Extron electronics Multi-Graphic Processor MGP 464 Bedienungsanleitung

Extron electronics

Extron electronics StudioStation 100 Bedienungsanleitung

Extron electronics

Extron electronics WindoWall Pro Series Bedienungsanleitung

Extron electronics

Extron electronics AXP 64 C AT Bedienungsanleitung

Extron electronics

Extron electronics IPL Pro S1 Bedienungsanleitung

Extron electronics

Extron electronics Annotator 300 Bedienungsanleitung

Extron electronics

Extron electronics IPCP 505 Bedienungsanleitung

Extron electronics

Extron electronics Annotator Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung