Federal Signal Corporation SelecTone Series Bedienungsanleitung

2562113A

Rev. A1 114

Printed in U.S.A.

SelecToneTM Models 304X and 314X

Explosion-Proof Amplied Speakers

Installation and

Maintenance Instructions

français...............page 23

español...............página 45

Warranty – Seller warrants all goods for ve years on parts and 2-1/2 years on

labor, under the following conditions and exceptions: Seller warrants that all

goods of Seller's manufacture will conform to any descriptions thereof for speci-

cations which are expressly made a part of this sales contract and at the time of

sale by Seller such goods shall be commercially free from defects in material or

workmanship. Seller reserves the right at the Seller’s discretion to “Repair and

Return” or “Replace” any item deemed defective during the warranty period.

This warranty does not cover travel expenses, the cost of specialized equipment

for gaining access to the product, or labor charges for removal and reinstalla-

tion of the product. This warranty shall be ineffective and shall not apply to

goods that have been subjected to misuse, neglect, accident, damage, improper

maintenance, or to goods altered or repaired by anyone other than Seller or its

authorized representative, or if ve years have elapsed from the date of shipment

of the goods by Seller with the following exceptions: lamps and strobe tubes are

not covered under this warranty. Outdoor warning sirens and controllers manu-

factured by Federal Warning Systems are warranteed for two years on parts and

one year on labor. No agent, employee, representative or distributor of Seller has

any authority to bind the Seller to any representation, afrmation, or warranty

concerning the goods and any such representation, afrmation or warranty shall

not be deemed to have become a part of the basics of the sales contract and

shall be unenforceable. THE FOREGOING WARRANTIES ARE EXCLUSIVE

AND IN LIEU OF ALL OTHER WARRANTIES OR MERCHANTABILITY,

FITNESS FOR PURPOSE AND OF ANY OTHER TYPE, WHETHER EX-

PRESS OR IMPLIED. These warranties shall not apply unless Seller shall be

given reasonable opportunity to investigate all claims for allegedly defective

goods. Upon Seller's instruction a sample only of allegedly defective goods shall

be returned to Seller for its inspection and approval. The basis of all claims for

alleged defects in the goods not discoverable upon reasonable inspection thereof

pursuant to paragraph 8 hereof must be fully explained in writing and received

by Seller within thirty days after Buyer learns of the defect or such claim shall be

deemed waived.

Industrial Systems

2645 Federal Signal Drive • University Park, IL 60484-3167

Tel: 708-534-4756 • Fax: 708-534-4852

Email: [email protected] • www.federalsignal-indust.com

Models 304X and 314X Explosion-Proof Amplied Speakers

Contents

Safety Message to Installers and Users............................................... 5

An Overview of the Speakers................................................................ 6

Unpacking the Speaker.......................................................................... 7

Mounting the Speaker............................................................................ 8

Installing the UTM Universal Tone Module ........................................ 11

Installing the Speaker Connector Card .............................................. 13

Safety Message to Operators.............................................................. 17

Testing and Operating the Speaker .................................................... 17

Safety Message to Maintenance Personnel....................................... 18

Maintaining the Speaker ...................................................................... 19

Ordering Replacement Parts............................................................... 19

Returning the Product for Credit ........................................................ 20

Tables

Table 1 Model 304X specications .......................................................... 7

Table 2 Model 314X specications .......................................................... 8

Table 3 Tone and Connector Card UL Audibility Ratings ........................ 8

Table 4 Model 304X replacement parts ................................................ 20

Table 5 Model 314X replacement parts ................................................ 20

Figures

Figure 1 Mounting hole locations and dimensions.................................. 9

Figure 2 Dimensions of the Model 304X............................................... 10

Figure 3 Dimensions of the Model 314X............................................... 10

Figure 4 Speaker with cover removed .................................................. 12

Figure 5 Speakers connected to EOL device ....................................... 15

Figure 6 Speakers with supervision relay and connector card ............. 16

Installation and Maintenance Instructions

Models 304X and 314X Explosion-Proof Amplied Speakers

Safety Message to Installers and Users

People’s lives depend on your safe installation of our products. It is

important to follow all instructions shipped with this product. This

device is to be installed by a trained electrician who is thoroughly

familiar with the National Electrical Code and/or Canadian Electrical

Code and will follow the NEC and/or CEC Guidelines as well as all

local codes. This horn should be considered a part of the warning

system and not the entire warning system.

The selection of the mounting location for this horn, its controls and

the routing of the wiring are to be accomplished under the direction

of the Facilities Engineer and the Safety Engineer. In addition, listed

below are some other important safety instructions and precautions

you should follow:

• Read and understand all instructions before installing, operating,

or maintaining this equipment.

• Warning–Explosion Hazard – Do not disconnect equipment

unless power has been switched off or the area in known to be

non-hazardous.

• Do not connect this unit to the system when power is on.

• Optimum sound distribution will be severely reduced if any

objects are in front of the horn. You should ensure that the front

of the horn is clear of any obstructions.

• All effective warning horns produce loud sounds which may

cause, in certain situations, permanent hearing loss. The device

should be installed far enough away from potential listeners to

limit their exposure while still maintaining its effectiveness. The

OSHA Code of Federal Regulations 1910.95 Noise Standard

provides guidelines which may be used regarding permissible

noise exposure levels.

• After installation, ensure that all mounting screws, bolts, and

threaded joints are tightened.

Installation and Maintenance Instructions

Models 304X and 314X Explosion-Proof Amplied Speakers

• Establish a procedure to routinely check the signal system for

proper activation and operation.

• Any maintenance to the unit MUST be performed by a trained

electrician in accordance with NEC Guidelines and local codes.

• Never alter the unit in any manner.

• The nameplate should NOT be obscured, as it contains cautionary

and/or other information of importance to maintenance personnel.

• After installation and completion of initial system test, a program

for periodic testing of this device must be established. Refer to

NFPA 72G, local Fire Codes and the authority having jurisdiction

for this information.

• Provide a copy of these instructions to the Safety Engineer,

operator(s) and maintenance personnel.

• File these instructions in a safe place and refer to them when

maintaining and/or reinstalling the device.

Failure to follow all safety precautions and instructions may result in

property damage, serious injury, or death.

An Overview of the Speakers

The Federal Signal Model 304X and 314X Explosion-Proof

Amplied Speakers are designed to produce crisp, clear tones in

supervised alarm notication systems. Both models are compatible

with re alarm, voice evacuation, suppression supervised control

panels, and power boosters.

These amplied speakers can broadcast tones generated by a Tone

Card installed into the speaker (the plug-in 32-tone UTM) or by a

central tone source in a voice evacuation or paging system. When live

public address or voice messages are required, plug-in Federal Signal

Connector Cards (AM25CK or AM70CK) interface with the Vrms of

the EVAC panel.

Installation and Maintenance Instructions

Models 304X and 314X Explosion-Proof Amplied Speakers

The speaker cone and projector are constructed of rugged spun

aluminum. The solid-state amplier circuit is protected in a die-

cast aluminum housing. Dust- and moisture-proof gaskets provide

protection from the elements. All external surfaces are sealed with

gray powder-coat paint. A heavy-duty swivel mount bracket allows

the installer to direct the output effectively.

The rugged construction and high output of the Model 304X and

314X make them ideal for use in harsh environments with high

ambient noise levels. Both models feature an internal gain control for

adjustment to suit the area.

This equipment is suitable for use in Class 1, Division 1, Groups B, C,

D; Class I, Division 2, Groups A, B, C, D or non-hazardous locations

only.

Unpacking the Speaker

After unpacking the horn, examine it for damage that may have

occurred in transit. If the horn has been damaged, do not attempt to

install or operate it. File a claim immediately with the carrier, stating

the extent of the damage. Carefully check all envelopes, shipping

labels, and tags before removing or discarding them. Disposal of all

shipping materials must be carried out in accordance with national

and local codes and standards. If any parts are missing, please call

Federal Signal Customer Support at 708-534-4756 or 877-289-3246.

Table 1 Model 304X specications

Operating Voltage: Regulated 24 Vdc (16 Vdc to 33 Vdc)

Maximum Current: 0.83 A

Standby Current: 0.13 A

Operating Temperature: -40 ºF to 150 ºF (-40 ºC to 66 ºC)

Net Weight: 15.4 lb (7.0 kg)

Shipping Weight: 22.8 lb (10.4 kg)

Dimensions: 16.3 in D x 17.0 in H x 13.1 in W

414.02 mm D x 431.80 mm H x 332.73 mm W

Construction: Aluminum enclosure and adjustable steel

mounting bracket with a powder-coat nish

Installation and Maintenance Instructions

Models 304X and 314X Explosion-Proof Amplied Speakers

Table 2 Model 314X specications

Operating Voltage: Regulated 24 Vdc (16 Vdc to 33 Vdc)

Maximum Current: 0.90 A

Standby Current: 0.13 A

Operating Temperature: -40 ºF to 150 ºF (-40 ºC to 66 ºC)

Net Weight: 16.4 lb (7.4 kg)

Shipping Weight: 32.4 lb (14.7 kg)

Dimensions: 19.5 in D x 18.8 in H x 16.7 in W

495.30 mm D x 477.52 mm H x 424.17 mm W

Ingress Protection: IP65 and NEMA 4X Approved

Construction: Aluminum enclosure and adjustable steel

mounting bracket with a powder-coat nish.

Compatible Tone Modules: TM2 or UTM

Compatible Speaker Connector Cards: AM25CK*, AM70CK*,

or 300CKS

*Series A versions of these connector cards are not compatible.

Table 3 Tone and Connector Card UL Audibility Ratings

Rating: UL dB (A) Sound Pressure per UL1480

Speaker: 304X 314X

Audibility Rating*: 91 97

AM25CK: 101 99

AM70CK: 101 99

*Based on TM6, HORN

Mounting the Speaker

The speaker can be mounted on any relatively at surface capable

of supporting the weight of the speaker. Conduit connections can be

made to the 1/2" NPT threaded openings at bottom of the housing

(see Figure 4 on page 12).

To mount the speaker:

1. Remove the two 1/2"-13 hex-head bolts, at washers, and

lockwashers that secure the mounting bracket to the speaker.

Installation and Maintenance Instructions

Models 304X and 314X Explosion-Proof Amplied Speakers

2. Disconnect the lanyard from the mounting bracket at the cotter ring.

MOUNTING PRECAUTION — Property damage, serious

injury, or death could occur if an accumulation of water,

snow, dust, etc. resides in the speaker projector, severely

reducing or preventing the operation of this device. Mount

the speaker so the speaker projector is pointed horizontally

or slightly downward.

3. Select the mounting location.

MOUNTING PRECAUTION — Property damage, serious

injury, or death could occur if any objects are in front of

speaker, severely reducing optimum sound distribution. For

maximum effectiveness, ensure that the front of the speaker

is clear of obstructions.

4. See Figure 1. Using the mounting bracket as a template, scribe

drill position marks on the mounting surface.

Figure 1 Mounting hole locations and dimensions

5.0" (127 mm)

3.0" (76 mm)

0.53" (13.5 mm)

290A5198

DRILLING PRECAUTION — Before drilling holes in any

surface, be sure both sides of surface are clear of anything

that could be damaged.

Installation and Maintenance Instructions

Models 304X and 314X Explosion-Proof Amplied Speakers

Figure 2 Dimensions of the Model 304X

290A5200

1.8" (46 mm)

TO REMOVE COVER

17.0"

(432 mm)

13.1"

(333 mm)

WARNING

16.3" (414 mm) 8.9" (226 mm)

Figure 3 Dimensions of the Model 314X

16.7"

(425 mm)

290A5201

18.8"

(478 mm)

1.8" (46 mm)

TO REMOVE COVER

19.5" (496 mm)

WARNING

8.9" (226 mm)

5. Drill holes at the scribed drill-position marks to accommodate the

1/2" diameter bolts.

6. Secure the bracket to the mounting surface with the 1/2"diameter

hex-head bolts, lockwashers, and hex nuts.

7. Reattach the speaker to the mounting bracket with the two

1/2"-13 hex-head bolts, at washers, and lockwashers.

8. Position the speaker to obtain the required sound coverage, then

tighten the bolts securely.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Federal Signal Corporation Sicherheitssystem Handbücher

Federal Signal Corporation

Federal Signal Corporation e-Q2B Handbuch

Federal Signal Corporation

Federal Signal Corporation PA300 Series 690009 Betriebsanleitung

Federal Signal Corporation

Federal Signal Corporation Global G-STR Series Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation e-Q2B Handbuch

Federal Signal Corporation

Federal Signal Corporation WV450XL Series Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation SmartSiren Platinum SSP3000B Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Solaris LP800 Handbuch

Federal Signal Corporation

Federal Signal Corporation PA300 Series 690009 Handbuch

Federal Signal Corporation

Federal Signal Corporation 2001-130 Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Commander 371ST-250 Handbuch

Federal Signal Corporation

Federal Signal Corporation SST-MV Handbuch

Federal Signal Corporation

Federal Signal Corporation PA4000 Handbuch

Federal Signal Corporation

Federal Signal Corporation VISION Kurzanleitung

Federal Signal Corporation

Federal Signal Corporation SST3-MV Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Vision SLR Series Handbuch

Federal Signal Corporation

Federal Signal Corporation G-LED Series Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation AV1ST Kurzanleitung

Federal Signal Corporation

Federal Signal Corporation 400 Series Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation CP-PB Series Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation PAGASYS GEN II P-SYS-G Betriebsanleitung

Federal Signal Corporation

Federal Signal Corporation Smart Siren Handbuch

Federal Signal Corporation

Federal Signal Corporation SMART VECTOR SL Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Global Series Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation PA4000 Handbuch

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung