Fein Optic RB20-HD Bedienungsanleitung
Fein
RB20 Biological Microscope
User’s Manual
info@feinoptic.com
Fein
Microscope Components
Eyepieces
Condenser
Objective Lens
1
Coarse Adjustment
Fine Adjustment
Tension
Adjustment
Microscope Frame /
Carrying Handle
Condenser Adjustment
Knob
Nosepiece
Mechanical
Stage
Fein
Microscope Components
2
Lock Screw
Fixed Koehler
Illumination
Focus Arm
Trinocular Head
Vertical
Adjustment
Knob
Horizontal
Adjustment
Knob
Power Switch
Light
Adjustment
Knob
Before Use
3Fein
Do not shake or drop the microscope.
Do not expose the microscope to direct sun, high temperatures, high humidity, dust,
or damp environments. Use a at work surface.
When moving the microscope use
both hands, holding the handle at the
back (1) and the frame at the front (2)
as shown in the image at right.
Set the power switch to o “O” before
replacing a bulb or fuse, and wait until the
lamp is cool. The power switch is located
on the side of the microscope.
Voltage range of 100~240V (47-63Hz) is supported.
Turn the rheostat control knob (1) to the
minimum and turn the power switch to the on
“I” position. Rotate the rheostat knob to increase
or decrease the brightness of the illumination. 1
1
2
4
Fein
Microscope Assembly
Follow the numbers below when assembling the microscope.
Eyepiece
Condenser
Objectives
Power Cord
1
2
3
4
Microscope Assembly
5Fein
Assemble the Condenser:
Rotate the coarse focus knob (1) to raise the
stage to its highest position.
Fully loosen the condenser lock-screw (2).
Insert the condenser into the hole of base
according to the arrowhead pointed (3), until
the condenser is aligned with the base, and
rotate the condenser to make the handle face
forward. Tighten the condenser lock-screw (2)
of condenser, then raise the condenser with the
up-down knob to the highest position.
2
Assemble the Objective:
Rotate the coarse focusing knob (1) to lower
the state to the lowest position. Then install
the objectives into the nosepiece (2) from
the lowest magnication to the highest in a
clockwise direction.
1
3
1
1
2
Fein 6
Microscope Assembly
Assemble the Eyepiece:
Take o the eyepiece tube cover (1).
Insert the eyepiece (2) into the eyepiece tube,
until the eyepiece is ush with the eyepiece
tube.
Tighten the eyepiece with M2.5 inner hexagon
lock-screw (3).
1
3
2
Assemble the Eyepiece:
Take o the eyepiece tube cover (1).
Insert the eyepiece (2) into the eyepiece tube,
until the eyepiece is ush with the eyepiece
tube.
Tighten the eyepiece with M2.5 inner hexagon
lock-screw (3).
1
3
2
Microscope Operation
7Fein
Turning the Lamp ON:
Set the power switch to the ON position “-”
(1). Adjust the illumination knob rotating
clockwise to increase the light intensity and
rotating counterclockwise to decrease the
light intensity.
Placing the Specimen Slide:
Push the spring lever (1) of the specimen
holder backwards. Place the specimen
slide (2) into the clip, then slowly move the
specimen holder lever back into place. This
will secure the specimen slide. Rotate the X
and Y axis knobs (3) on the stage until the
center of the specimen slide is aligned with
the objective.
Adjust the Focus:
Rotate the condenser adjustment knob (1)
raising it to the highest position. Move the
4x objective into the optical path. Looking
through the eyepieces, rotate the coarse
focusing knob (2) until the specimen appears
in the eld of view and begins to come into
focus. Rotate the ne focusing knob (3) to
bring the specimen into crisp focus.
1
2
12
3
1
2
3
Fein 8
Microscope Operation
Adjust the Focusing Tension:
If it becomes hard to move the coarse focus
knob, or the stage drifts and the sample falls
out of focus the tension needs to be adjusted.
Tighten the tension by adjusting the tension
adjustment ring (1) in the direction of the
arrow shown at right. Loosen the tension by
rotating the tension adjustment ring in the
opposite direction.
Adjusting the Interpupillary Distance:
When observing with both eyes, adjust
the eyepieces (2) to t your personal
interpupillary distance. The scale between
the eyepieces (1) notes the interpupillary
distance setting. It’s a good idea to note
this number when working in a setting
where multiple people are using the same
instrument. This allows you to easily reset
your interpupillary distance.
1
Aperture Diaphragm:
The aperture diaphragm dictates the
numerical aperture (NA) of the illumination.
The best resolution, contrast, and depth
of eld is obtained when the NA of the
illumination matches with the NA of the
objective. Rotate the diaphragm adjustment
ring (1) so the pointer matches up with the
inscription of the objective being used.
1
1
2
1
2
9Fein
Microscope Operation
Using the 100x Immersion Oil Objective:
Start with the 4x objective and focus on
the sample. Place a drop of immersion oil
(1) on the specimen. Rotate the nosepiece
counterclockwise so the 100x objective is in the
light path and the oil seals the space between
the objective and the cover slip. Use the ne
focus knob to obtain a clear image. Make sure
there are no air bubbles in the oil. If there are,
rotate the nosepiece slightly to remove them.
After use, wipe the lens with a tissue moistened
with microscope cleaning solution.
Using Filters:
Filters can increase the contrast in microscopy
images. The lter sits on top of the light as
shown at the right. The RB20 accepts a 45mm
diameter lter.
C-Mount assembly:
Loosen the trinocular head set screw (1)
and remove the trinocular port dust cap
(2). Remove any dust cover caps from the
c-mount (3). Insert the c-mount into the
trinocular port as image shows at right and
tighten the set screw (1). Connect the camera
to the c-mount threads (4) and re-tighten the
set screw. When the eyepieces are in focus,
adjust the focus on the c-mount to parfocal
the camera with the eyepieces.
1
1
3
24
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Fein Optic Mikroskop Handbücher
Fein Optic
Fein Optic HDCAM-WiFi Bedienungsanleitung
Fein Optic
Fein Optic FZ12 Bedienungsanleitung
Fein Optic
Fein Optic Mi50 Bedienungsanleitung
Fein Optic
Fein Optic RB50 Bedienungsanleitung
Fein Optic
Fein Optic RB20 Bedienungsanleitung
Fein Optic
Fein Optic IRB20 Bedienungsanleitung
Fein Optic
Fein Optic Mi40 Bedienungsanleitung
Beliebte Mikroskop Handbücher anderer Marken
Thermo Scientific
Thermo Scientific Nicolet iN10 Leitfaden
National
National DC3-163 Bedienungsanleitung
KERN Optics
KERN Optics OPE-1 Bedienungsanleitung
OPTIKA MICROSCOPES
OPTIKA MICROSCOPES B-150D Bedienungsanleitung
Prior
Prior Lux POL Bedienungsanleitung
Opitec
Opitec Smartscoop 115615 Bedienungsanleitung
VWR
VWR VisiScope 384 Series Bedienungsanleitung
Nikon
Nikon ECLIPSE E200 POL Bedienungsanleitung
Leica
Leica DI C800 Handbuch
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Bedienungsanleitung
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Bedienungsanleitung
Olympus
Olympus SZ61 Bedienungsanleitung