Fujitsu S1500M - ScanSnap - Document Scanner Bedienungsanleitung

Getting Started

P3PC-2412-01EN

Thank you for purchasing ScanSnap S1500/S1500M (hereinafter referred to as "the ScanSnap").

This manual describes the preparation required for use of the ScanSnap. Follow the preparation procedures

described in this manual.

Make sure to read the "Safety Precautions" document provided with the ScanSnap before use. For details about

ScanSnap functions and features, basic operation, daily care, consumable replacement and troubleshooting, refer

to the "Operator's Guide" (PDF). The "Operator's Guide" is available on the Setup DVD-ROM.

Microsoft, Windows, Windows Vista, and SharePoint are either registered trademarks or trademarks of Microsoft Corpora-

tion in the United States and/or other countries.

Intel, Pentium, and Intel Core are either registered trademarks or trademarks of Intel Corporation in the United States and

other countries.

Apple, Apple logo, Mac, and Mac OS are trademarks of Apple Inc.

PowerPC is a trademark of International Business Machines Corporation in the United States, other countries, or both.

Other product names, company names, or service names used in this manual are generally the trademarks or registered

trademarks of their respective companies.

Checking the Components

Make sure that all items shown below are included in the package. If any other packaging is provided, make sure

to store it as well. Make sure to handle the components with care.

The box and packaging materials are required for storage and transportation of the ScanSnap. Do not throw them

away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized FUJITSU scan-

ner service provider.

ScanSnap (×1) AC cable (×1) (*) AC adapter (×1) USB cable (×1)

Adobe®Acrobat®

DVD-ROM (×1)

(for S1500)

Setup DVD-ROM

(×1)

Adobe®Acrobat®

DVD-ROM Set (×1)

(for S1500M)

Carrier Sheet (×1) Rack2-Filer (×1)

(Exclusive to S1500 with Rack2-Filer)

Getting Started

(this manual) (×1)

Safety Precautions

(×1)

(*) The contents may vary depending on the country and the ScanSnap model purchased.

Safety Precautions

The provided "Safety Precautions" document contains

important information about the safe use of the Scan-

Snap. Before using the ScanSnap, make sure to read

and understand the information provided in the "Safety

Precautions" document.

Symbols Used in This

Manual

The following symbols are used in this manual.

Referring to the "Operator's

Guide"

To refer to the "Operator’s Guide", insert the Setup DVD-

ROM in to the DVD-ROM drive, and follow the procedure

below.

Click the [Documents] button in the [ScanSnap Setup]

dialog box, and then the [ScanSnap Manager] button.

Double-click the [Operator's Guide] icon in the [Scan-

Snap] window.

Removing the Protective

Packaging

The ScanSnap comes with a variety of protective packag-

ing attached.

Follow the procedure described below to remove the

packaging before using the ScanSnap.

1. Remove the binding tapes from the back

of the ScanSnap.

2. Open the ADF paper chute (cover) (1),

and pull the tape to remove the protective

foam sheet (2) from the stacker. Open the

stacker (3) and pull the tape to remove the

protective sheet from the ADF top section

(4).

3. Pull the ADF release catch to open the

ADF top section, and pull the tape to

remove the protective card.

Symbol Description

This symbol alerts operators to an

operation that, if not strictly observed,

may result in safety hazards to person-

nel or damage to equipment.

This symbol alerts particularly impor-

tant information. Be sure to read this

information.

This symbol alerts operators to helpful

advice regarding operation.

This symbol indicates operations using

Windows®.

This symbol indicates operations using

Mac OS.

CAUTION

If a magnetic card or IC card comes into contact with

the magnets on the ADF top section, the magnetic part

of the card may be damaged.

Binding

tapes

Stacker

ADF paper chute (cover)

ADF top section

ADF release catch

Protective

card and tape

Magnets

Installing the Software

This explains the procedures for installing the software

from the Setup DVD-ROM supplied with the ScanSnap.

DVD-ROM drive is required for the installation.

This explains how to install S1500 software on a Win-

dows®(Microsoft®Windows Vista®).

For details on how to install S1500 using a Mac OS, or

Adobe®Acrobat®on your computer, refer to "Installing

the Software" in the Operator's Guide.

■Software

You can install the following software. For details about

each software, refer to "Installing the Software" in the

Operator's Guide.

•ScanSnap Manager (Scanner driver)

•ScanSnap Organizer (File management

software)

•CardMinder (Business card management

software)

•ABBYY FineReader for ScanSnap (OCR

software)

•Scan to Microsoft SharePoint (SharePoint

Server associated software)

■System Requirements

The system requirements for S1500 are as follows.

*1: Service Pack 2 or later is required

*2: Service Pack 4 or later is required

1. Check that the computer is not connected

to the ScanSnap.

2. Turn your computer on and log on as a

user with "Administrator" privileges

(Administrators).

3. Insert the Setup DVD-ROM into the DVD-

ROM drive.

⇒The [ScanSnap Setup] dialog box appears.

4. Click the [Install Products] button.

⇒The [Welcome to the InstallShield Wizard for

ScanSnap] dialog box appears.

5. Click the [Next] button.

⇒The [Select Features] dialog box appears.

6. Confirm that all required software are

selected, and click the [Next] button.

⇒The [Choose Destination Location] dialog box

appears.

For S1500 Windows Installation

Operating

system

•Microsoft

®Windows Vista®(32-bit/

64-bit)

•Microsoft

®Windows®XP (32-bit) (*1)

•Microsoft

®Windows®2000 Profes-

sional (*2)

CPU Intel®Core™ 2 Duo 2.2 GHz or higher

recommended

(Minimum of Intel®Pentium® 4 1.8

GHz)

Memory 1 GB or more recommended

(Minimum of 512 MB)

Hard disk

space

2.86 GB or more of free hard disk space

is required

(3.17 GB or more of free hard disk

space is required for S1500 with Rack2-

Filer)

• If the CPU and the memory do not meet the rec-

ommended requirements, the scanning speed

slows down.

• According to your Windows system disk man-

agement, the actual increase in used disk

space after installation may differ from the

required disk space.

Prepare the Setup DVD-ROM.

If the [ScanSnap Setup] dialog box does

not appear, double-click "Setup.exe" on this

DVD-ROM using "Explore" or "My Com-

puter".

Installing ScanSnap Manger is necessary.

7. Choose the destination folder and click the

[Next] button.

⇒The [ScanSnap License Agreement] dialog

box appears.

8. Read the full text of the "ScanSnap

License Agreement". If you agree to the

terms of this license, select [I accept the

terms of the license agreement] and click

the [Next] button.

⇒The [Start Copying Files] dialog box appears.

9. Check the settings and click the [Next] but-

ton.

⇒The installation is started. When the installa-

tion is complete, the [InstallShield Wizard

Complete] dialog box appears.

10.

Click the [Finish] button.

⇒The [ScanSnap Setup] window appears.

11.

Remove the Setup DVD-ROM from the

DVD-ROM drive.

⇒Software installation is complete. Proceed to

"Connecting the ScanSnap"(page 5).

This explains how to install S1500M software on a Mac

OS (Mac OS X v10.5).

For details on how to install S1500M using a Windows®,

or install Adobe®Acrobat®on your computer, refer to

"Installing the Software" in the Operator’s Guide.

■Software

You can install the following software. For details about

each software, refer to the Operator’s Guide.

•ScanSnap Manager (Scanner driver)

•ABBYY FineReader for ScanSnap (OCR

software)

•Cardiris (Business card text-recognized

software)

■System Requirements

The system requirements for S1500M are as follows.

1. Check that the computer is not connected

to the ScanSnap.

2. Turn your computer on and log in with an

account that has admin rights.

3. Insert the Setup DVD-ROM into the DVD-

ROM dive.

⇒The [ScanSnap] window appears.

4. Double-click the [ScanSnap] icon.

⇒A confirmation message window appears.

5. Click the [Continue] button.

⇒The [Welcome to the ScanSnap Installer]

window appears.

6. Click the [Continue] button.

⇒The [Important Information] window appears.

This operation needs to be performed sev-

eral times, according to the number of soft-

ware applications to be installed.

For S1500M Mac OS Installation

Operating

system

• Mac OS X v10.5

• Mac OS X v10.4

CPU Intel®Core™ 2 Duo 2.4 GHz or higher

recommended

(Minimum of Intel®Core™ Duo 1.83

GHz /PowerPC G5 1.6 GHz)

Memory 1 GB or more recommended

(Minimum of 512 MB)

Hard disk

space

2.39 GB or more of free hard disk space

If the CPU and the memory do not meet the rec-

ommended requirements, the scanning speed

slows down.

Prepare the Setup DVD-ROM.

7. Read the "Important Information", then

click the [Continue] button.

⇒The [Software License Agreement] window

appears.

8. Read the "Software License Agreement",

then click the [Continue] button.

⇒A confirmation message window appears.

9. To accept the agreement, click the [Agree]

button.

⇒The [Standard Install on "(volume_name)"]

window appears.

10.

Click the [Install] button.

⇒The installation is started.

⇒The Cardiris installation window appears.

11.

Scroll down and read the "License" to the

end. Then, click the [Continue] button.

⇒A confirmation message window appears.

12.

Click the [Agree] button.

⇒The [Select Destination] window appears.

⇒By default, Cardiris is installed in the Applica-

tions Folder.

13.

Click the [Continue] button.

⇒The [Installation Type] window appears.

14.

Confirm that [Easy Install] is specified in

the [Installation Type] pop-up menu.

15.

Click the [Install] button.

⇒The installation is started.

⇒The [Finish Up] window appears.

16.

Click the [Quit] button.

⇒The [Startup item registration] window

appears.

17.

Click the [OK] button.

⇒When the installation is complete, the [Instal-

lation completed successfully] window

appears.

18.

Click the [Close] button.

19.

Remove the Setup DVD-ROM from the

DVD-ROM drive.

⇒Software installation is complete. Proceed to

"Connecting the ScanSnap".

Connecting the ScanSnap

Connect the ScanSnap after the desired software has

been installed.

1. Connect the AC cable to the AC adapter

(collectively called the "power cable").

To install only ScanSnap Manager, click the

[Customize] button to show the [Custom

install on "(volume_ name)"] window, and

clear the [ABBYY FineReader for Scan-

Snap] and [Cardiris] checkboxes.

You cannot install "ABBYY FineReader for

ScanSnap" or "Cardiris" only. Only one ScanSnap can be connected to a com-

puter at a time.

CAUTION

Do not use AC adapters other than the one supplied

with this ScanSnap. Doing so may cause damage to

the ScanSnap.

Manufacturer: SANKEN ELECTRIC Co,.LTD

Model number: SED80N2-24.0

AC adapter

AC cable

2. Plug the power cable into the power con-

nector at the back of the ScanSnap, and

the other end to an AC outlet.

3. Remove the tape seal on the USB connec-

tor of the ScanSnap.

4. Connect the USB cable to the ScanSnap

and your computer.

5. Open the ADF paper chute (cover) of the

ScanSnap.

⇒The ScanSnap turns on, and the [Scan] but-

ton lights up blue.

⇒The ScanSnap should be automatically

detected by your computer.

• Use only the USB cable supplied with this

ScanSnap. The operation using a com-

mercial USB cable is not guaranteed.

• When connecting to a USB hub, be sure

to connect the ScanSnap to the hub near-

est to your computer (first stage). If the

ScanSnap is connected to a USB hub

from the second stage onwards, it may

not operate correctly.

• If connecting the ScanSnap with USB 2.0,

make sure that the USB port and the USB

hub are compliant with USB 2.0. The

scanning speed slows down if the Scan-

Snap is connected with USB 1.1. If your

computer has the USB 2.0 compatible

port, use it.

Power connector

Power cable

AC outlet

Although the bottom of the ScanSnap may

become hot when it is used, it does not

affect ScanSnap operation, or cause any

bodily harm. Be careful not to hit it to the

ground when you move the ScanSnap.

USB cable

[Scan] button

ADF paper chute

(cover)

6. Check the [ScanSnap Manager] icon.

⇒The [ScanSnap Manager] icon should be dis-

played in the taskbar.

⇒The [ScanSnap Manager] icon should be dis-

played in the Dock.

⇒Connecting the ScanSnap to your computer is

complete. Proceed to "Document Scan Test".

Document Scan Test

After installing the software and connecting the Scan-

Snap and computer, use ScanSnap Manager and check

that documents can be scanned.

The following describes the document scan test proce-

dure.

1. Load the test documents into the

ScanSnap.

1. Pull the stacker on the ADF top section

towards you.

2. Prepare to load the document as follows.

3. Load the test documents on the ADF paper

chute (cover), and adjust the side guides to

the size of the documents.

It will take a few moments until the

ScanSnap is ready to be used, and the

[ScanSnap Manager] icon changes to

on the taskbar.

It will take a few moments until the

ScanSnap is ready to be used, and the

[ScanSnap Manager] icon changes to

in the Dock.

This describes the Quick Menu scanning

method. For other scanning methods, refer to

the Operator’s Guide.

Stacker

Raise the

stacker

Pull out the extension

Open the side

guides

Set the documents

face-down and top-first

2. Press the [Scan] button on the ScanSnap.

⇒Scanning starts.

⇒The Quick Menu appears when scanning is

completed.

3. Click an icon of the function you want per-

form from the Quick Menu.

⇒The selected function starts. When using an

application, the application window appears.

⇒Document scan test is complete.

ScanSnap preparations are complete.

For details about how to operate or use the

ScanSnap, refer to the Operator’s Guide.

Contact for Inquires

Refer to the contact list on the last page of the "Safety

Precautions" document.

If scanning does not start, refer to "Trouble-

shooting" in the Operator’s Guide.

Andere Handbücher für S1500M - ScanSnap - Document Scanner

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Scanner Handbücher

Fujitsu

Fujitsu ScanPartner 15C Bedienungsanleitung

Fujitsu

Fujitsu fi-590PRB Handbuch

Fujitsu

Fujitsu SV600 Bedienungsanleitung

Fujitsu

Fujitsu fi-4340C Konfigurationshandbuch

Fujitsu

Fujitsu 6240 - fi - Document Scanner Handbuch

Fujitsu

Fujitsu S1500M - ScanSnap - Document Scanner Handbuch

Fujitsu

Fujitsu FI-5015C Handbuch

Fujitsu

Fujitsu M3096GX Bedienungsanleitung

Fujitsu

Fujitsu ScanPartner 15C Referenzhandbuch

Fujitsu

Fujitsu M3099EH Bedienungsanleitung

Fujitsu

Fujitsu M3092DC Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap iX500 Montageanleitung

Fujitsu

Fujitsu fi-5220C Bedienungsanleitung

Fujitsu

Fujitsu fi-565PR Handbuch

Fujitsu

Fujitsu ScanPartner 15C Bedienungsanleitung

Fujitsu

Fujitsu ScanPartner 10 Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap iX1600 Montageanleitung

Fujitsu

Fujitsu M4099D Handbuch

Fujitsu

Fujitsu FI-6130 Handbuch

Fujitsu

Fujitsu ScanSnap iX1500 Montageanleitung

Fujitsu

Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm... Handbuch

Fujitsu

Fujitsu FI-4860C2 Handbuch

Fujitsu

Fujitsu ScanSnap S1100i Montageanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung

Visioneer

Visioneer CardReader 100 Kurzanleitung

Rohde & Schwarz

Rohde & Schwarz TSME6 Bedienungsanleitung