Fujitsu ScanSnap S1300 Bedienungsanleitung

Getting Started

P3PC-2712-03EN

Thank you for purchasing ScanSnap S1300 (hereinafter referred to as "the ScanSnap"). This manual describes

the preparation required for use of the ScanSnap. Follow the preparation procedures described in this manual.

For details about ScanSnap functions and features, basic operation, daily care, and consumable replacement,

refer to the Operator's Guide (PDF) which is available on the Setup DVD-ROM. Keep this manual in a safe place

so that you can refer to it at any time when using the ScanSnap.

Microsoft, Windows, Windows Vista, Excel, and PowerPoint are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Apple, the Apple logo, Mac, Mac OS, iPhoto, and Rosetta are trademarks of Apple Inc.

ABBYY and FineReader are trademarks of ABBYY.

Other company names and product names are the registered trademarks or trademarks of the respective companies.

August 2011

Checking the Components

Make sure that all items shown below are included in the package.

If any other packaging is provided, make sure to store it as well. Make sure to handle the components with care.

The box and packaging materials are required for storage and transportation of the ScanSnap. Do not throw them

away.

If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner

service provider.

ScanSnap (× 1)

USB cable (× 1)

AC adapter (× 1)

AC cable (× 1) (*)

Setup DVD-ROM

(× 1)

Getting Started (× 1)

(This manual)

Safety Precautions (× 1)

USB bus power cable

(× 1)

(*) The contents may vary depending on the

country and the ScanSnap model purchased.

Rack2-Filer (× 1)

(Exclusive to S1300 with

Rack2-Filer)

Power cable

S1300_Soft_e_GS_JP_EN.fm Page 1 Tuesday, July 12, 2011 2:59 PM

Read the Safety Precautions

Before using the ScanSnap, make sure to read and

understand the information provided in the "Safety

Precautions" document.

Symbols Used in This Manual

The following symbols are used in this manual.

Referring to the "Operator's

Guide"

To refer to the "Operator’s Guide", insert the Setup DVD-

ROM in to the DVD-ROM drive, and follow the procedure

below.

Click the [Manuals] button in the [ScanSnap Setup]

dialog box, and then the [Operator's Guide] button.

Double-click the [Operator's Guide] icon in the

[ScanSnap] window.

Installing the Software

Windows®Installation (Jpage 2)

Mac OS Installation (Jpage 4)

■Software

You can install the following software.

zScanSnap Manager (Scanner driver)

ScanSnap Organizer (File management

application)

zCardMinder (Business card management

application)

zABBYY FineReader for ScanSnap™ (OCR

application)

To use Evernote for Windows and/or Scan to

Microsoft SharePoint, the required software should

also be installed.

For details about each software and its installation

procedures, refer to "Installing the Software" in the

Operator's Guide.

Symbol Description

This indication alerts operators to an

operation that, if not strictly observed, may

result in safety hazards to personnel or

damage to the product.

This symbol alerts operators to particularly

important information. Be sure to read this

information.

This symbol alerts operators to helpful

advice regarding operations.

This symbol indicates operations using

Windows®.

This symbol indicates operations using

Mac OS.

CAUTION

Do not connect the ScanSnap to your

computer before installing the software.

When you export the data scanned by

ScanSnap to your mobile device, download

ScanSnap Connect Application for mobile from

an application store (such as the App Store).

Windows

Installation

S1300_Soft_e_GS_JP_EN.fm Page 2 Tuesday, July 12, 2011 2:59 PM

■System Requirements

*1: Service Pack 2 or later is required

*2: Service Pack 4 or later is required

*3: For

Windows Vista

, if .NET Framework 3.5 SP1 is not

installed, a maximum of 500 MB of additional free hard

disk space is required for it.

For Windows®XP, if .NET Framework 3.5 SP1 is not

installed, a maximum of 530 MB of additional free hard

disk space is required for it.

For Windows®2000, if .NET Framework 2.0 is not

installed, a maximum of 310 MB of additional free hard

disk space is required for it.

*4: When using USB 3.0 port, it works as USB 2.0.

■Installation

1. Turn on the computer and log on as a user

with Administrator privileges.

2. Insert the Setup DVD-ROM into the DVD-

ROM drive.

DThe [ScanSnap Setup] dialog box appears.

3. Click the [Install Products] button.

DThe [Install Products] dialog box appears.

4. Click the [ScanSnap] button.

Follow the instructions on the screen to continue

with the installation.

If installation is not completed successfully, click the

[Manuals] button in the [ScanSnap Setup] dialog box,

and then the [Troubleshooting (installation)] button,

and refer to Troubleshooting (installation).

Operating

system

Windows

7 (32-bit/64-bit)

Windows Vista

(32-bit/64-bit)

Windows

XP (32-bit) (*1)

Windows

2000 (*2)

CPU

Intel®Core™ 2 Duo 2.2 GHz or higher

recommended

(Minimum: Intel® Pentium®4 1.8 GHz)

Memory

Windows

(32-bit/64-bit)

32-bit: 1 GB or more

64-bit: 2 GB or more

Windows Vista® (32-bit/64-bit)

Windows®XP (32-bit)

Windows®2000

512 MB or more

(1 GB or more recommended)

Display

resolution

800 × 600 pixels or higher

Hard disk

space (*3)

2220 MB or more of free hard disk

space is required

(2670 MB or more of free hard disk

space is required for using with

Rack2-Filer)

USB port (*4) USB2.0/USB1.1

If the CPU or the memory do not meet the

required specifications, or the type of USB port

or USB hub is USB 1.1, the scanning speed will

slow down.

When the font size is large, some screens may

not be displayed properly. In that case, use a

smaller font size.

The actual increase in used disk space after

installation and the required disk space for

installation may differ from each other

depending on your Windows

system disk

management.

If the [ScanSnap Setup] dialog box does

not appear, double-click

"ScanSnap.exe" in the DVD-ROM via

Windows Explorer.

S1300_Soft_e_GS_JP_EN.fm Page 3 Tuesday, July 12, 2011 2:59 PM

■Software

You can install the following software.

zScanSnap Manager (Scanner driver)

zABBYY FineReader for ScanSnap™ (OCR

application)

zCardiris™for ScanSnap (Business card text-

recognized application)

To use Evernote for Mac, it should also be installed.

For details about each software and its installation

procedures, refer to "Installing the Software" in the

Operator's Guide.

■System Requirements

*1: It is recommended to apply the latest updates to Mac

OS.

*2: When using USB 3.0 port, it works as USB 2.0.

■Installation

1. Turn your computer on and log on as a

user with Administrator privileges.

2. Insert the Setup DVD-ROM into the DVD-

ROM drive.

DThe [ScanSnap] window appears.

3. Double-click the [ScanSnap] icon.

Follow the instructions on the screen to continue

with the installation.

Mac OS Installation

Operating

system (*1)

Mac OS X v10.7

Mac OS X v10.6

Mac OS X v10.5

Mac OS X v10.4

CPU

Intel®Core™ 2 Duo 2.4 GHz or higher

recommended

(Minimum: Intel®Core™ Duo 1.83 GHz,

PowerPC® G5 1.6 GHz)

Memory

Mac OS X v10.7

2 GB or more

Mac OS X v10.6

1 GB or more

Mac OS X v10.5

Mac OS X v10.4

512 MB or more

(1 GB or more recommended)

Display

resolution

1024 × 768 pixels or higher

Hard disk

space 1555 MB or more of free hard disk space

USB port (*2) USB 2.0/USB 1.1

If the CPU or the memory do not meet the

required specifications, or the type of USB

port or USB hub is USB 1.1, the scanning

speed will slow down.

S1300_Soft_e_GS_JP_EN.fm Page 4 Tuesday, July 12, 2011 2:59 PM

Connecting the ScanSnap

1. Select the power cable type according to

power source for the ScanSnap.

zTo use the ScanSnap at a fixed location

Use the power cable to connect to an AC outlet.

For details about the connection, refer to "Using

the Power Cable" (page 5) in Step 3.

zTo use the ScanSnap in a remote location with

your laptop computer or a place without AC

outlets available nearby

Use the USB bus power cable for power supply

from your computer.

For details about the connection, refer to "Using the

USB Bus Power Cable" (page 5) in Step 3.

2. Remove the tape seal covering the USB

connector and power connector of the

ScanSnap.

3. Connect cables to the ScanSnap.

zUsing the Power Cable

1. Connect the power cable to the power

connector of the ScanSnap and plug in the

AC outlet.

2. Connect the USB cable to the USB

connector on the ScanSnap and the USB

port on your computer.

zUsing the USB Bus Power Cable

1. Connect the USB bus power cable to the

power connector on the ScanSnap and the

USB port on your computer.

2. Connect the USB cable to the USB

connector on the ScanSnap and the USB

port on your computer.

Only one ScanSnap can be used by a

computer at a time.

Use only the cable supplied with the ScanSnap.

CAUTION

Do not use AC adapters other than the one

supplied with this ScanSnap. Doing so may cause

damage to the ScanSnap.

Manufacturer: LEI

Model No.: NU13-1072166-I3

AC Cable

Adapter

USB Bus

Power Cable

To power on the ScanSnap, the USB

cable and either of the power cables

(power cable or USB bus power cable)

need to be connected.

When connecting to USB hub, make sure

to connect the ScanSnap to the USB hub

which is connected to a USB port of your

computer. Use a powered USB hub (with

AC adapter).

If USB port or USB hub is USB 1.1,

scanning speed will slow down.

Connect the USB cable with the USB

mark facing up.

S1300_Soft_e_GS_JP_EN.fm Page 5 Tuesday, July 12, 2011 2:59 PM

4. Open the ADF paper chute (cover) of the

ScanSnap.

DThe ScanSnap is powered on and the [Scan]

button lights in blue.

5. Check the ScanSnap Manager icon.

DThe ScanSnap Manager icon appears on the

taskbar.

DThe ScanSnap Manager icon appears in the

Dock.

Scan Test

For details on documents that can be scanned with

the ScanSnap and how to load documents, refer to

"ScanSnap Overview" in the Operator's Guide.

1. Load a document in the ScanSnap.

1. Pull up the extension.

2. Slide open the side guides of the right and

left.

The bottom of the ScanSnap may

become hot when the ScanSnap is

used. This heat does not affect

ScanSnap operation or cause any

physical harm directly. Be careful not to

drop the ScanSnap when hold the

bottom for carrying the ScanSnap.

The icon varies depending on the power

source to be used.

For power cable connection:

For USB bus power cable connection:

In Windows®7, the ScanSnap Manager

icon is displayed in the menu which

appears when you click on the

taskbar.

To have the ScanSnap Manager icon

always displayed on the taskbar, drag

the icon and drop it onto the taskbar.

[Scan] Button

ADF Paper Chute

(Cover)

The icon varies depending on the power

source to use.

For power cable connection:

For USB bus power cable connection:

Extension

Side Guides

S1300_Soft_e_GS_JP_EN.fm Page 6 Tuesday, July 12, 2011 2:59 PM

3. Load the document on the ADF paper chute

(cover), and adjust the side guides to the size

of the document.

2. Press the [Scan] button on the ScanSnap.

DScanning starts. The Quick Menu appears

when scanning is completed.

3. In the Quick Menu, click the icon of the

application to link with ScanSnap

Manager.

DThe selected application is started.

Confirm that ScanSnap Manager is linked with the

application that was selected from the Quick Menu.

If scanning does not start, refer to

"Troubleshooting" in the ScanSnap

Manager Help.

Set the document

face-down and top-first

S1300_Soft_e_GS_JP_EN.fm Page 7 Tuesday, July 12, 2011 2:59 PM

Contact for Inquiries

zABBYY FineReader for ScanSnap™

For inquiries regarding ABBYY FineReader for

ScanSnap™, refer to the contact list by

proceeding to the following.

From the [Start] menu, select the [All Programs]

J[ABBYY FineReader for ScanSnap (TM) 4.1]

J[User's Guide] J[Technical Support] J

[ABBYY Offices].

From the Finder window, select the

[Applications] J[ABBYY FineReader for

ScanSnap] J[FineReader for ScanSnap

Preferences] J[Help] J[FineReader for

ScanSnap Help] J[ABBYY Offices].

zCardiris™ for ScanSnap

For inquiries regarding Cardiris™ for ScanSnap,

refer to the following Web page:

http://www.irislink.com/support

zEvernote

For inquiries regarding Evernote, refer to the

following Web page:

http://www.evernote.com/about/contact/support/

zGoogle Docs™

For inquiries regarding Google Docs™, refer

to the Docs Help or the Help forum by clicking

on the Help link in Google Docs™.

zSalesforce

Contact your Salesforce system administrator.

For other inquiries, refer to the FUJITSU Office

contact list on the last page of the Safety Precautions

manual.

S1300_Soft_e_GS_JP_EN.fm Page 8 Tuesday, July 12, 2011 2:59 PM

Andere Handbücher für ScanSnap S1300

Inhaltsverzeichnis

Andere Fujitsu Scanner Handbücher

Fujitsu

Fujitsu M3093GX Bedienungs- und Wartungshandbuch

Fujitsu

Fujitsu M3096EX Konfigurationshandbuch

Fujitsu

Fujitsu FI-6130 Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

Fujitsu

Fujitsu fi-5650C Konfigurationshandbuch

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Handbuch

Fujitsu

Fujitsu FI-5530C2 Handbuch

Fujitsu

Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Handbuch

Fujitsu

Fujitsu S500M - ScanSnap - Document Scanner Bedienungsanleitung

Fujitsu

Fujitsu ScanSnap iX500 Bedienungsanleitung

Fujitsu

Fujitsu fi-4110EOX2/ScanSnap Konfigurationshandbuch

Fujitsu

Fujitsu M3093EX Bedienungsanleitung

Fujitsu

Fujitsu fi-5000N Handbuch

Fujitsu

Fujitsu ScanPartner 15C Bedienungsanleitung

Fujitsu

Fujitsu fi-6130Z Handbuch

Fujitsu

Fujitsu FI 4220C - Document Scanner Bedienungsanleitung

Fujitsu

Fujitsu S1500M - ScanSnap - Document Scanner Handbuch

Fujitsu

Fujitsu 5015C - fi - Sheetfed Scanner Handbuch

Fujitsu

Fujitsu C150-E049-02EN Installations- und Betriebshandbuch

Fujitsu

Fujitsu PA03630-B055 Bedienungsanleitung

Fujitsu

Fujitsu ScanPartner 15C Installations- und Betriebshandbuch

Fujitsu

Fujitsu fi-6670 Series Bedienungsanleitung

Fujitsu

Fujitsu M3091DC Bedienungsanleitung

Fujitsu

Fujitsu 6240 - fi - Document Scanner Handbuch

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung

Visioneer

Visioneer CardReader 100 Kurzanleitung

Rohde & Schwarz

Rohde & Schwarz TSME6 Bedienungsanleitung