Fujitsu Primepower200 Bedienungsanleitung

P321-E122-04EN

PRIMEPOWER

PRIMEPOWER200

PRIMEPOWER400

PRIMEPOWER600

Preface

This manual explains the features, functions, installation and additions to the PRIMEPOWER200,

PRIMEPOWER400 and PRIMEPOWER600 servers and is intended for experienced users with a basic knowledge

of UNIX and UNIX servers.

This preface describes the following items:



SAFE OPERATION



Introduction to Chapters



Related Manuals



Warning Message Conventions



Operating Environment



Prohibited Uses



FCC Class A Notice



Trademarks



SAFE OPERATION

Using This Manual

This manual contains important information regarding the use and handling of this product. Read

this manual thoroughly. Pay special attention to the section "Important Warnings". Use the product

according to the instructions and information available in this manual.

FUJITSU makes every efforts to prevent users and bystanders from being injured or from suffering

damage to their property. Use the product according to this manual.

Introduction to Chapters

The structure of this manual is as follows:

CHAPTER 1 Features of the PRIMEPOWER Servers

Chapter 1 gives an overview of the features of the PRIMEPOWER of servers.

CHAPTER 2 PRIMEPOWER200 Pedestal Server

Chapter 2 gives an overview of the PRIMEPOWER200 Pedestal Server, names and functions of

parts, preparations for use, and expansion.

CHAPTER 3 PRIMEPOWER200 Rackmount (4U) Server

Chapter 3 gives an overview of the PRIMEPOWER200 Rackmount (4U) Server, names and

functions of parts, preparations for use, and expansion.

CHAPTER 4 PRIMEPOWER400 Pedestal Server

Chapter 4 gives an overview of the PRIMEPOWER400 Pedestal Server, names and functions of

parts, preparations for use, and expansion.

CHAPTER 5 PRIMEPOWER400 Rackmount (4U) Server

Chapter 5 gives an overview of the PRIMEPOWER400 Rackmount (4U) Server, names and

functions of parts, preparations for use, and expansion.

CHAPTER 6 PRIMEPOWER400 Rackmount (10U) Server

Chapter 6 gives an overview of the PRIMEPOWER400 Rackmount (10U) Server, names and

functions of parts, preparations for use, and expansion.

CHAPTER 7 PRIMEPOWER600 Pedestal Server

Chapter 7 gives an overview of the PRIMEPOWER600 Pedestal Server, names and functions of

parts, preparations for use, and expansion.

CHAPTER 8 PRIMEPOWER600 Rackmount (10U) Server

Chapter 8 gives an overview of the PRIMEPOWER600 Rackmount (10U) Server, names and

functions of parts, preparations for use, and expansion.

CHAPTER 9 Expansion Disk Cabinet

Chapter 9 gives an overview of the Expansion Disk Cabinet, names and functions of parts,

installation, conﬁguration of the disk drive bay, and hot-swapping of redundant components.

CHAPTER 10 Expansion File Unit Type-2

Chapter 10 gives an overview of the Expansion File Unit Type-2, names and functions of parts,

installation, conﬁguration of the disk drive bay, and hot-swapping of redundant components.

CHAPTER 11 Internal I/O Units

Chapter 11 gives an overview of how to use the various internal I/O devices.

CHAPTER 12 RCI Commands

Chapter 12 gives an overview of the RCI commands.

CHAPTER 13 Troubleshooting

Chapter 13 helps the user isolate the causes of system failures, and suggests possible solutions.

CHAPTER 14 Glossary

Chapter 14 explains the meaning of the various specialized terms used in this manual.

Related Manuals

The following manuals contain related material:

"Enhanced Support Facility User’s Guide"

"Enhanced Support Facility Installation Guide"

"Enhanced Support Facility Machine Administration Instructions"

Warning Message Conventions

A warning message consists of a label and statements. The following warning message types are displayed to

prevent users and bystanders from being injured or from suffering property damage.

WARNING

This indicates a hazardous situation that could result in death or serious injury if the user does not

perform the procedure correctly.

CAUTION

This indicates a hazardous situation that could result in minor or moderate personal injury if the user

does not perform the procedure correctly. It also indicates that damage to the product or other

property may occur of the user does not perform the procedure correctly.

IMPORTANT

This indicates information that could help the user use the product more efﬁciently.

How warning messages are displayed in the manual

Each warning message is accompanied by an indicator of the warning type, followed by a more detailed

explanation.

(Example)

WARNING

Electric shock/ﬁre

If you detect an abnormality such as heat build-up, smoke or foul

odor, immediately turn the AC main line switch OFF, or disconnect

the power cable, and contact a service engineer. Failure to do so

might cause electric shock or ﬁre.

Important warning messages are summarized under "Important Warnings".

iii

Operating Environment

This product has been designed and produced to be used safely by general users in a general ofﬁce environment.

When using this product, observe the installation and handling precautions described in this manual.

Prohibited Uses

This Product is designed, developed and manufactured as contemplated for general use, including without

limitation, general ofﬁce use, personal use and household use, but is not designed, developed and manufactured as

contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead

directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"),

including without limitation, nuclear power core control, airplane control, air trafﬁc control, mass transport

operation control, life support, weapon launching control. You shall not use this Product without securing the

sufﬁcient safety required for the High Safety Required Use. Hence, if these products are used in such hazardous

environments, FUJITSU LIMITED and SUN MICROSYSTEMS, INC. Do not warrant them at all. If you wish to

use this Product for High Safety Required Use, please consult with our sale person in charge before such use.

Documents produced by FUJITSU may contain technology controlled under the Foreign Exchange and Foreign

Trade Control Law of Japan. Those documents containing such technology should not be exported from Japan or

transferred to anyone other than residents of Japan without ﬁrst obtaining license from the Ministry of

International Trade and Industry of Japan in accordance with the above law.

FCC Class A Notice

CAUTION

This equipment has been tested and found to comply with the limits for a Class digital

device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in

a commercial environment.This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

This product is compliant with harmonics guidelines.

Trademarks



Solaris is a trademark of Sun Microsystems Inc.



SPARC64 is a registered trademark or trademark of SPARC International, Inc. in the United States and other

countries, under license by Fujitsu Ltd.

licenses already restricting its use, copying, distribution, and recompilation. No part of this product or related

documentation may be reproduced in any form by any means without prior written authorization of Fujitsu

Limited and its licensors, if any.

The contents of this manual may be revised without prior notice.

Safety Cautions

Important Warnings

The following types of warnings are found in this manual:

WARNING

This indicates a hazardous situation could result in death or serious injury if the

user does not perform the procedure correctly.

Normal Operation Warnings

task

Electric shock/fire

Do not deform, damage or strip the power cable.

Doing so might cause electric shock or fire.

If you detect an abnormality such as heat build-up,

smoke or foul odor, immediately turn the main line

switch OFF, or disconnect the power cable, and

contact a service engineer. Failure to do so might

cause electric shock or fire.

Warning

CAUTION This indicates a hazardous situation that could result in minor or moderate

personal injury if the user does not perform the procedure correctly. Also,

damage to the product or other property may occur.

Normal Operation Cautions

Task

Data destruction:

Unit damage/

Data destruction:

Unit damage:

Pressing the RESET switch while the system is running may

cause data to be lost.

Caution

Install "Enhanced Support Facility" before operating the system.

Without this package, incorrect front panel operations and

hardware errors may cause the system to shutdown or cause data

to be lost.

Pressing the REQUEST switch while the system is running

may cause data to be lost.

Do not turn the console (unit connected to serial port) on

after turning the PRIMEPOWER on, or turn the console off while

the PRIMEPOWER is on. Doing so might cause system

malfunction and cause data to be lost.

Before turning the power off, check the following points.

Otherwise, data may be lost.

Are there any currently executing programs?

Are there any current users?

Are floppy disks or tape cartridges still inserted in

their drives?

If necessary, back up files before turning the power off.

If improper commands are used at the ok prompt, data may be

lost. If you need to use any other commands except those given

in this manual, you should fully understand the function and usage

of the command before using it.

Except in any emergency, never turn the AC main line switch or

disconnect the power cable while the PRIMEPOWER is turned on.

If you do, data in the disk drive may be lost.

Before you eject a floppy disk, be sure to either execute

the Solaris eject command, or perform eject operation in the

application you are using. Failure to do so might cause data to be

lost. Also, do not eject a floppy disk while the access

LED is on. Doing so may damage the disk.

Pay attention to the following points when handling the

hard disk units. If these precautions are not observed,

the magnetic disk unit may be damaged or data lost.

Do not subject the unit to exceeds impact.

Do not bring the unit near to equipment (motors,

speakers, etc.) that generate strong magnetic fields.

Do not store the unit at locations likely to cause

condensation inside the unit or at locations subject to

sudden changes in temperature or humidity.

Do not connect I/O units to the maintenance port.

Connecting I/Os to the SCF port may damage this unit.

vii

Product Handling Cautions

Maintenance

WARNING

The following operations on this product and options provided by FUJITSU

should be performed by a service engineer, and should not be performed by the

user. Otherwise, the user may create the risk of electric shock, injury or ﬁre.



New installation and moving of units



Removal of the front, rear and side panel covers



Mounting/removal of built-in option units



Connection/disconnection of external interface cables



Maintenance (repair and periodic diagnosis and maintenance)

CAUTION The following operations on this product and options provided by FUJITSU

should be performed by a service engineer, and should not be performed by the

user. Otherwise, the user may cause the products to malfunction.



Unpacking of option adapter, etc. delivered to the customer



Removal of the front panel, rear panel and side panel covers



Mounting/removal of built-in option units



Connection/disconnection of external interface cables



Maintenance (repair and periodic diagnosis and maintenance)

viii

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE700 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S4 Bedienungsanleitung

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Service-Handbuch

Fujitsu

Fujitsu SPARC Enterprise T5140 Installationsanleitung

Fujitsu

Fujitsu Primergy RX300 S4 Leitfaden

Fujitsu

Fujitsu PRIMERGY TX300 S5 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M12-1 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX600 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX122 S1 Betriebsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Leitfaden

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY 870 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX500 S7 Bedienungsanleitung

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S7 Benutzerhandbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung