Fujitsu PRIMERGY GX2460 M1 Bedienungsanleitung

Upgrade and Maintenance Manual - English

FUJITSU Server PRIMERGY GX2460 M1

Upgrade and Maintenance Manual

July 2020

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Documentation creation according

to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

GX2460 M1 Upgrade and Maintenance Manual 3

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result in

electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

4 Upgrade and Maintenance Manual GX2460 M1

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for Japan:

About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

GX2460 M1 Upgrade and Maintenance Manual 5

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

6 Upgrade and Maintenance Manual GX2460 M1

Version history

Issue number Reason for update

1.0 / July 2019 Initial release

2.0 / January 2020 Section OCP cards updated, section replacing base

unit added, cable plans updated

GX2460 M1 Upgrade and Maintenance Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.1 Notational conventions . . . . . . . . . . . . . . . . . . . . 18

2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 19

2.1 Classification of procedures . . . . . . . . . . . . . . . . . 20

2.1.1 Customer Replaceable Units (CRU) . . . . . . . . . . . . . . . 20

2.1.2 Upgrade and Repair Units (URU) . . . . . . . . . . . . . . . . 21

2.1.3 Field Replaceable Units (FRU) . . . . . . . . . . . . . . . . . 22

2.2 Average task duration . . . . . . . . . . . . . . . . . . . . . 23

2.3 Tools you need at hand . . . . . . . . . . . . . . . . . . . . 24

2.4 Documentation overview . . . . . . . . . . . . . . . . . . . 24

3 Important information . . . . . . . . . . . . . . . . . . . . . 27

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 27

3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 35

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 36

3.4 Environmental protection . . . . . . . . . . . . . . . . . . . 37

4 Basic hardware procedures . . . . . . . . . . . . . . . . . . 39

4.1 Using diagnostics information . . . . . . . . . . . . . . . . 39

4.1.1 Locating the defective server . . . . . . . . . . . . . . . . . . 39

4.1.2 Locating the defective component . . . . . . . . . . . . . . . . 39

4.2 Shutting down the server . . . . . . . . . . . . . . . . . . . 40

4.3 Disconnecting the power cord . . . . . . . . . . . . . . . . 41

4.4 Getting access to the component . . . . . . . . . . . . . . . 42

4.4.1 Extending the server out of the rack . . . . . . . . . . . . . . . 42

4.4.2 Removing the server from the rack . . . . . . . . . . . . . . . 44

Upgrade and Maintenance Manual GX2460 M1

Contents

4.5 Removing the top covers . . . . . . . . . . . . . . . . . . . . 46

4.5.1 Removing the front top cover . . . . . . . . . . . . . . . . . . . 46

4.5.2 Removing the rear top cover . . . . . . . . . . . . . . . . . . . 47

4.6 Installing the top covers . . . . . . . . . . . . . . . . . . . . 48

4.6.1 Installing the rear top cover . . . . . . . . . . . . . . . . . . . . 48

4.6.2 Installing the front top cover . . . . . . . . . . . . . . . . . . . 49

4.7 Reassembling . . . . . . . . . . . . . . . . . . . . . . . . . . 50

4.7.1 Installing the server in the rack . . . . . . . . . . . . . . . . . . 50

4.7.2 Sliding the server into the rack . . . . . . . . . . . . . . . . . . 52

4.8 Connecting the power cord . . . . . . . . . . . . . . . . . . . 53

4.9 Switching on the server . . . . . . . . . . . . . . . . . . . . . 54

4.10 Handling the air duct . . . . . . . . . . . . . . . . . . . . . . 55

4.10.1 Removing the air duct . . . . . . . . . . . . . . . . . . . . . . . 55

4.10.2 Installing the air duct . . . . . . . . . . . . . . . . . . . . . . . 55

5 Basic software procedures . . . . . . . . . . . . . . . . . . . 57

5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 57

5.1.1 Backing up the setting information of BIOS/BMC . . . . . . . . . 57

5.1.2 Verifying and configuring the backup software solution . . . . . . 57

5.1.3 Switching on the ID indicator . . . . . . . . . . . . . . . . . . . 57

5.2 Completing the maintenance task . . . . . . . . . . . . . . . 58

5.2.1 Updating or recovering the BIOS and BMC . . . . . . . . . . . . 58

5.2.1.1 Updating the BIOS . . . . . . . . . . . . . . . . . . . . . . 58

5.2.1.2 Updating the BMC . . . . . . . . . . . . . . . . . . . . . . . 58

5.2.2 Enabling Option ROM scan . . . . . . . . . . . . . . . . . . . . 58

5.2.3 Verifying the system time settings . . . . . . . . . . . . . . . . 59

5.2.4 Viewing and clearing the System Event Log (SEL) . . . . . . . . 60

5.2.4.1 Viewing the SEL . . . . . . . . . . . . . . . . . . . . . . . . 60

5.2.4.2 Clearing the SEL . . . . . . . . . . . . . . . . . . . . . . . 60

5.2.5 Updating the NIC configuration file in a Linux environment . . . . 61

5.2.6 Performing a RAID array rebuild . . . . . . . . . . . . . . . . . 62

5.2.7 Looking for MAC addresses . . . . . . . . . . . . . . . . . . . 63

5.2.7.1 Looking for the MAC address of a LAN controller . . . . . . . 63

5.2.8 Switching off the ID indicator . . . . . . . . . . . . . . . . . . . 64

GX2460 M1 Upgrade and Maintenance Manual 9

Contents

6 Power supply unit (PSU) . . . . . . . . . . . . . . . . . . . . 65

6.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 65

6.1.1 PSU configurations . . . . . . . . . . . . . . . . . . . . . . . 66

6.1.2 Assembly rules . . . . . . . . . . . . . . . . . . . . . . . . . 66

6.2 Redundant power supply . . . . . . . . . . . . . . . . . . . 67

6.2.1 Installing a hot-plug PSU . . . . . . . . . . . . . . . . . . . . 67

6.2.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 67

6.2.1.2 Removing the Velcro . . . . . . . . . . . . . . . . . . . . . 67

6.2.1.3 Installing a hot-plug PSU . . . . . . . . . . . . . . . . . . . 69

6.2.1.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 69

6.2.2 Removing a hot-plug PSU . . . . . . . . . . . . . . . . . . . . 70

6.2.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 70

6.2.2.2 Removing a hot-plug PSU . . . . . . . . . . . . . . . . . . 70

6.2.2.3 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 71

6.2.3 Replacing a hot-plug PSU . . . . . . . . . . . . . . . . . . . . 72

6.2.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 72

6.2.3.2 Removing the defective hot-plug PSU . . . . . . . . . . . . 72

6.2.3.3 Installing the new hot-plug PSU . . . . . . . . . . . . . . . 72

6.2.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 73

6.2.4 Replacing the power distribution board . . . . . . . . . . . . . 74

6.2.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 74

6.2.4.2 Removing the defective power distribution board . . . . . . 74

6.2.4.3 Installing the new power distribution board . . . . . . . . . 76

6.2.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 77

7 Hard disk drive (HDD) and solid state drive (SSD) . . . . . . 79

7.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 80

7.2 Handling HDDs / SSDs without installation frame . . . . . . 81

7.2.1 2.5-inch HDD/SSD and 3.5-inch installation frame . . . . . . . 81

7.3 2.5-inch HDD/SSD configuration . . . . . . . . . . . . . . . 85

7.3.1 Configuration with eight HDD/SSD modules . . . . . . . . . . 85

7.3.2 Installing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . . 86

7.3.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 86

7.3.2.2 Installing a 2.5-inch HDD/SSD module . . . . . . . . . . . . 86

7.3.2.3 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 88

10 Upgrade and Maintenance Manual GX2460 M1

Contents

7.3.3 Removing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . . 89

7.3.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 89

7.3.3.2 Removing a 2.5-inch HDD/SSD module . . . . . . . . . . . 90

7.3.3.3 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 90

7.3.4 Replacing a 2.5-inch HDD/SSD module . . . . . . . . . . . . . 91

7.3.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 91

7.3.4.2 Removing the defective 2.5-inch HDD/SSD module . . . . . 92

7.3.4.3 Installing the new 2.5-inch HDD/SSD module . . . . . . . . . 92

7.3.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 92

7.3.5 Replacing the HDD backplane . . . . . . . . . . . . . . . . . . 93

7.3.5.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 93

7.3.5.2 Removing the defective HDD backplane . . . . . . . . . . . 93

7.3.5.3 Installing the new HDD backplane . . . . . . . . . . . . . . 94

7.3.5.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 95

8 Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

8.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . . 98

8.1.1 Numbering of the fan modules . . . . . . . . . . . . . . . . . . 98

8.2 Replacing a fan module . . . . . . . . . . . . . . . . . . . . . 99

8.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . . 99

8.2.2 Removing a defective fan module (Fan 1/2/3) . . . . . . . . . . 99

8.2.3 Installing a new fan module (Fan 1/2/3) . . . . . . . . . . . . 100

8.2.4 Removing a defective fan module (Fan 4/5) . . . . . . . . . . 102

8.2.5 Removing the fan rivet . . . . . . . . . . . . . . . . . . . . . 104

8.2.6 Installing a new fan module (Fan 4/5) . . . . . . . . . . . . . 105

8.2.7 Installing the fan rivet . . . . . . . . . . . . . . . . . . . . . . 106

8.2.8 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 107

9 Expansion cards and riser modules . . . . . . . . . . . . . 109

9.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 110

9.2 Expansion cards in the middle riser module . . . . . . . . 112

9.2.1 Installing an expansion card in a riser module . . . . . . . . . 112

9.2.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 112

9.2.1.2 Removing the middle riser module . . . . . . . . . . . . . 112

9.2.1.3 Installing an expansion card in a riser module . . . . . . . 113

9.2.1.4 Installing the middle riser module . . . . . . . . . . . . . . 114

9.2.1.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 114

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY CX400 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 200 S2 Betriebsanleitung

Fujitsu

Fujitsu BS2000 SE320 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5140 Service-Handbuch

Fujitsu

Fujitsu Primergy N800 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S4 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5140 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX420 S1 Benutzerhandbuch

Fujitsu

Fujitsu PRIMERGY CX2550 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S7 Bedienungsanleitung

Fujitsu

Fujitsu Supercomputer PRIMEHPC FX700 Montageanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Technisches Handbuch

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Leitfaden

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung