Fujitsu PRIMERGY RX200 S3 Betriebsanleitung

PRIMERGY

PRIMERGY RX200 S3 Server

Service Supplement

Joachim Pichol

Fujitsu Siemens Computers GmbH Paderborn

33094 Paderborn

e-mail: email: [email protected]

Tel.: (05251) 14888-18

Fax: (++49) 700 / 372 00001

RX200 S3

Sprachen: En

Edition August 2006

Comments… Suggestions… Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

RX200 S3 Service Supplement

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . . 7

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacing components . . . . . . . . . . . . . . . . . . . . 17

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.2 Pulling out / removing the server . . . . . . . . . . . . . . . . 17

4.3 Opening/closing the server . . . . . . . . . . . . . . . . . . . 19

4.4 Replacing the control panel kit . . . . . . . . . . . . . . . . . 20

4.5 Replacing the chassis ID / temperature sensor . . . . . . . . . 21

4.6 Replacing the fan backplane . . . . . . . . . . . . . . . . . . 22

4.7 Replacing the SAS backplane for 3.5-inch drives . . . . . . . . 23

4.8 Replacing the SAS backplane for 2.5-inch drives . . . . . . . . 24

4.9 Replacing the power-sharing board (power backplane) . . . . . 25

4.10 Replacing the system board . . . . . . . . . . . . . . . . . . . 27

5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.1 Control panel board (LED board) . . . . . . . . . . . . . . . . 29

5.2 Backplanes for SAS drives . . . . . . . . . . . . . . . . . . . 30

5.2.1 SAS backplane for 3.5-inch drives . . . . . . . . . . . . . . . 30

5.2.2 SAS backplane for 2.5-inch drives . . . . . . . . . . . . . . . 31

5.3 Fan backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5.4 Power-sharing board . . . . . . . . . . . . . . . . . . . . . . 33

6 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

6.1 Cable overview . . . . . . . . . . . . . . . . . . . . . . . . . 35

6.2 Cable layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

RX200 S3 Service Supplement 5

1 Preface

The PRIMERGY RX200 S3 is an Intel-based server for mid-tier applications in

server farms. The server is well suited for front end services as well as for use

as an e-mail server, Internet server, or general applications server.

1.1 Overview of the documentation

Concept and target groups

This Service Supplement adds to the information provided in the Operating

Manual, the Options Guide and the Technical Manual for the system board.

VCaution!

The activities described in this manual may only be performed by

specialist personnel with technical training.

IHow to install/remove the hot-plug components is described in the

Operating Manual for the server.

Service DVD

A service DVD PRIMERGY is available for Fujitsu Siemens service partners.

This DVD contains the following manuals as PDF files:

– The “Security” manual

– The Operating Manual for the PRIMERGY RX200 S3

– The Technical Manual for the system board D2300

– The Options Guide for the PRIMERGY RX200 S3

– The Service Supplement for the PRIMERGY RX200 S3

– The “BIOS Setup” manual

6 ServiceSupplement RX200 S3

Overview of the documentation Preface

Information/activity Manual

Performance features and technical data of

the server Operating Manual

Installation and activation, including:

– External connections to the server

– Operation

– Configuration of the server

– Installation of the rack mounting kit

Troubleshooting

Installation/removal of all hot-plug compo-

nents:

– Hot-plug power supply units

– Hot-plug HDD modules

– Hot-plug system fans

Information about the system board:

– Performance features of the system

board

– Connector assignment

– Jumper settings

– Replacing the battery

Technical Manual

Extensions and conversions:

– Extending/replacing main memory

– Installing a second processor/replacing

the processor/heat sink

– Installing accessible drives

– Installing controllers in non-hot-plug PCI

slots

– Installing RemoteView components

Options Guide

Replacing components:

– Replacing the control panel

– Replacing the fan backplane

– Replacing the SAS backplane

– Replacing the power-sharing board

– Replacing the system board

Service Supplement

Settings

Cabling

Table 1: Overview of the RX200 S2 documentation (part 1 of 2)

RX200 S3 Service Supplement 7

Notational conventions

1.2 Notational conventions

The following notational conventions are used in this manual:

BIOS settings BIOS Setup

Detailed security information Security Manual

Italics indicate commands, menu items or software programs.

“Quotation marks” indicate names of chapters and terms that should be

emphasized.

Êtext which follows this symbol describes activities that

must be performed in the order shown.

VCAUTION! pay particular attention to text marked with this symbol.

Failure to observe this warning may endanger your life,

damage the server, or lead to loss of data.

Isupplementaryinformation,remarksandtipsfollowthis

symbol.

Table 2: Notational conventions

Information/activity Manual

Table 1: Overview of the RX200 S2 documentation (part 2 of 2)

RX200 S3 Service Supplement 9

2Procedure

VCAUTION!

The actions described in this manual should only be performed by

engineers, service personnel or technical specialists.

ÊFirst of all please familiarize yourself with the safety instructions in the

chapter “Safety Instructions” on page 11f.

ÊMake sure that all required manuals (see Service-DVD) are available,

printing out the PDF files if necessary. You will definitely need:

– the Operating Manual for the server and

– the Options Guide for the server

– the Technical Manual for the system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the chapter “Replacing components” on

page 17ff.

ÊReplace the defective component, as described in the relevant chapter.

ÊClose the server.

ÊConnect up the server cables.1

ÊConnect the server to the mains.1

ÊStart the operating system.1

ÊIf necessary, perform the relevant configuration.1

1These procedures are described in the Operating Manual.

Andere Handbücher für PRIMERGY RX200 S3

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu FUTRO S700 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2560 M2 Bedienungsanleitung

Fujitsu

Fujitsu 2737 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S3 Montageanleitung

Fujitsu

Fujitsu PRIMERGY BX600 Leitfaden

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M4 Bedienungsanleitung

Fujitsu

Fujitsu Supercomputer PRIMEHPC FX700 Montageanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S3 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY TX150 S6 Leitfaden

Fujitsu

Fujitsu PRIMERGY RX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 870 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S1p Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S6 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S7 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1310 M1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung