Fujitsu PRIMERGY TX1330 M4 Bedienungsanleitung

Operating Manual - English

FUJITSU Server PRIMERGY TX1330 M4

Operating Manual

October 2018

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Documentation creation according

to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any without the prior written permission of

Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

TX1330 M4

Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result in

electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

Operating Manual

TX1330 M4

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

TX1330 M4

Operating Manual

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for Japan:

About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

Operating Manual

TX1330 M4

Operating Manual

Content

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.1 Notational conventions . . . . . . . . . . . . . . . . . . . . 11

2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 13

2.1 Documentation overview . . . . . . . . . . . . . . . . . . . 13

3 Product description . . . . . . . . . . . . . . . . . . . . . . 17

3.1 Overview of the server . . . . . . . . . . . . . . . . . . . . . 18

3.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.3 Connectors, controls and indicators . . . . . . . . . . . . . 28

3.3.1 Connectors on the server . . . . . . . . . . . . . . . . . . . . 28

3.3.1.1 Server front . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.3.1.2 Server rear . . . . . . . . . . . . . . . . . . . . . . . . . . 29

3.3.2 Controls and indicators on the server front . . . . . . . . . . . 30

3.3.2.1 Controls on the front panel . . . . . . . . . . . . . . . . . . 30

3.3.2.2 Indicators on the front panel . . . . . . . . . . . . . . . . . 31

3.3.2.3 Indicator on the ODD . . . . . . . . . . . . . . . . . . . . . 35

3.3.2.4 Indicators on the hot-plug HDD/SSD module . . . . . . . . 36

3.3.3 Indicators on the server rear . . . . . . . . . . . . . . . . . . . 37

3.3.3.1 Indicators on the I/O panel . . . . . . . . . . . . . . . . . . 37

3.3.3.2 Indicator on hot-plug PSU . . . . . . . . . . . . . . . . . . 40

3.3.3.3 Indicator on FJBU . . . . . . . . . . . . . . . . . . . . . . 41

4 Important information . . . . . . . . . . . . . . . . . . . . . 43

4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 43

4.2 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 51

4.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 53

4.5 Environmental protection . . . . . . . . . . . . . . . . . . . 54

Operating Manual

TX1330 M4

Content

5 Starting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

5.1 Installation steps, overview . . . . . . . . . . . . . . . . . . . 58

5.2 Unpacking the server . . . . . . . . . . . . . . . . . . . . . . 60

5.3 Setting up the floorstand model . . . . . . . . . . . . . . . . 61

5.3.1 Installing the anti-tilt bracket . . . . . . . . . . . . . . . . . . . 62

5.4 Installing the server in the rack . . . . . . . . . . . . . . . . . 64

5.4.1 Installing the server in the rack . . . . . . . . . . . . . . . . . . 66

5.5 Connecting cables . . . . . . . . . . . . . . . . . . . . . . . . 68

5.5.1 Notes on connecting/disconnecting cables . . . . . . . . . . . . 68

5.5.2 Connecting devices to the server . . . . . . . . . . . . . . . . . 69

5.5.3 Connecting the power cord . . . . . . . . . . . . . . . . . . . . 70

5.5.3.1 Using cable ties (standard PSU) . . . . . . . . . . . . . . . 70

5.5.3.2 Using the cable clamp . . . . . . . . . . . . . . . . . . . . . 72

5.6 Switching the server on for the first time . . . . . . . . . . . 73

5.7 Configuring the server with

ServerView Installation Manager . . . . . . . . . . . . . . . . 74

5.7.1 Configuring the server and installing the operating system . . . . 74

5.7.1.1 Configuring the controllers . . . . . . . . . . . . . . . . . . 75

5.7.1.2 Installing the operating system . . . . . . . . . . . . . . . . 75

5.8 Configuring the server without

ServerView Installation Manager . . . . . . . . . . . . . . . . 75

5.8.1 Configuring the server and installing the operating system . . . . 75

5.8.1.1 Configuring the onboard SAS/SATA controller . . . . . . . . 75

5.8.1.2 Installing the operating system . . . . . . . . . . . . . . . . 75

5.9 Notes on configuring controllers . . . . . . . . . . . . . . . . 77

5.9.1 Notes on onboard SATA controllers . . . . . . . . . . . . . . . . 77

5.9.2 Notes on SAS/SATA RAID controllers . . . . . . . . . . . . . . 77

5.10 Note on operating system . . . . . . . . . . . . . . . . . . . 78

6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

6.1 Switching the server on and off . . . . . . . . . . . . . . . . 79

6.2 Access to the drives (floorstand model) . . . . . . . . . . . . 82

6.2.1 Removing the drive covers . . . . . . . . . . . . . . . . . . . . 82

TX1330 M4

Operating Manual 9

Content

6.3 Installing HDD/SSD modules . . . . . . . . . . . . . . . . . 85

6.3.1 Installing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . . 85

6.3.1.1 Removing a 2.5-inch HDD/SSD dummy module . . . . . . . 85

6.3.1.2 Installing a 2.5-inch HDD/SSD module . . . . . . . . . . . . 86

6.3.2 Installing 3.5-inch HDD modules . . . . . . . . . . . . . . . . 87

6.3.2.1 Removing a 3.5-inch HDD dummy module . . . . . . . . . 87

6.3.2.2 Installing a 3.5-inch HDD/SSD module . . . . . . . . . . . . 87

6.4 Installing a second PSU . . . . . . . . . . . . . . . . . . . . 89

6.4.1 Removing the dummy cover . . . . . . . . . . . . . . . . . . . 89

6.4.2 Installing a PSU . . . . . . . . . . . . . . . . . . . . . . . . . 90

6.5 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . 91

7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . 93

8 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 101

9 Warranty and service . . . . . . . . . . . . . . . . . . . . . . 109

10 Operating Manual

TX1330 M4

Content

Andere Handbücher für PRIMERGY TX1330 M4

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu FUTRO S900 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S5 Bedienungsanleitung

Fujitsu

Fujitsu Primergy BX2560 M1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M12 Series Installations- und Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M3 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S6 Bedienungsanleitung

Fujitsu

Fujitsu SPARC EnterpriseM3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Montageanleitung

Fujitsu

Fujitsu PRIMERGY CX122 S1 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S6 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 S1 Betriebsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M8000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX2550 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 100 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Installationsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung