Fujitsu PRIMERGY TX150 S6 Betriebsanleitung

PRIMERGY TX150 S6 Server

Service Supplement

Edition February 2008

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

TX150 S6 Service Supplement

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 8

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1.2 Removing the front cover . . . . . . . . . . . . . . . . . . 17

4.1.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.1.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 18

4.1.2.2 Removing the rack front cover . . . . . . . . . . . . . . . . 18

4.2 Replacing the operating panel module . . . . . . . . . . . . 19

4.3 Replacing the standard PS . . . . . . . . . . . . . . . . . . 20

4.4 Replacing the Power backplane . . . . . . . . . . . . . . . . 22

4.5 Replacing the 3.5“ SAS/SATA backplane . . . . . . . . . . . 23

4.6 Replacing the 2.5“ SAS backplane . . . . . . . . . . . . . . 24

4.7 Replacing the IDTEMP combo . . . . . . . . . . . . . . . . . 26

4.8 Replacing the intrusion switches . . . . . . . . . . . . . . . 28

4.9 Replacing the processor . . . . . . . . . . . . . . . . . . . . 30

4.10 Replacing the system board . . . . . . . . . . . . . . . . . . 35

Service Supplement TX150 S6

Contents

5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.1.1 Operating panel board . . . . . . . . . . . . . . . . . . . . . . 39

5.1.2 3.5“ SAS/SATA backplane . . . . . . . . . . . . . . . . . . . . 40

5.1.3 2.5“ SAS backplane . . . . . . . . . . . . . . . . . . . . . . . . 41

5.1.4 Power backplane . . . . . . . . . . . . . . . . . . . . . . . . . 42

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

TX150 S6 Service Supplement 5

1 Introduction

The PRIMERGY TX150 S6 Server is an Intel-based server for small- and

medium-sized networks. The server is suitable for use as a file server and also

as an application, information or Internet server. It is available as a floorstand or

rack model. The floorstand model can be converted to a rack model using an

optional conversion kit.

1.1 Overview of the documentation

Concept and target groups

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

Service DVD

Service partners of Fujitsu Siemens can order a Service DVD PRIMERGY. On

the DVD the following manuals are available in pdf format:

– The “Safety notes and other important information” manual

– The Operating Manual for PRIMERGY TX150 S6

– The Technical Manual for the system board D2559

– The Options Guide for PRIMERGY TX150 S6

– The Service Supplement PRIMERGY TX150 S6

– The “BIOS Setup” manual

6 Service Supplement TX150 S6

Overview of the documentation Introduction

Information/procedure Manual

Detailed safety notes “Safety notes and other

important information“

manual

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External ports

– Operation

– Configuration of the server

– Installation of the rack mounting kit

Troubleshooting

Installation/removal or replacing of the CSS

components:

– Hot-plug power supply units

– Hot-plug hard disk drives

– Memory modules

– System fans

– Expansion boards

Information about the system board:

– Features of the system board

– Board layout

– Jumper settings

–LEDdisplays

– Replacing the battery

Technical Manual

Table 1: Overview of the documentation TX150 S6

TX150 S6 Service Supplement 7

Introduction Overview of the documentation

Extensions and upgrades:

IFor some components only the installation

routine is described in the Options Guide.

Removing these components proceed in

reverse order.

– Extending/replacing the main memory

– Installing accessible drives, like floppy disk

drive, DVD/DVD-RW drive, multibay etc.

– Installing a hard disks extension box

– Installing a ServerView Local Service Panel

– Installing expansion boards in the PCI slots

– Installing the RAID key

– Installing the COM2 interface

– Installing the parallel interface

– Converting from standard PS to hot-plug PS

– Converting from floorstand model to rack model

Options Guide

Cabling

Replacement routines:

– Replacing the operating panel

– Replacing the standard PS

– Replacing the Power backplane

– Replacing the 3.5“ SAS/SATA backplane

– Replacing the 2.5“ SAS backplane

– Replacing the IDTEMP Combo

– Replacing the intrusion switches

– Replacing the processor

– Replacing the system board

Service Supplement

Board layout

BIOS setup “BIOS Setup“ manual

Information/procedure Manual

Table 1: Overview of the documentation TX150 S6

8 Service Supplement TX150 S6

Notational conventions Introduction

1.2 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands or menu items.

„Quotation marks“ indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Table 2: Notational conventions

TX150 S6 Service Supplement 9

2Procedure

VCAUTION!

The actions described in these instructions should only be performed by

service personnel.

ÊFirst of all please familiarize yourself with the safety instructions in the

section chapter “Safety notes” on page 11 et seq. .

ÊEnsure that all required manuals (see Service DVD) are available, printing

out the PDF files if necessary. You will definitely need the Operating Manual

for the server, the Options Guide for the server and the Technical Manual for

the system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the chapter “Replacement routines” on

page 17 et seq. .

ÊReplace the defective component as described in the relevant chapter.

IProcedures which are identical for the floorstand and rack models are

only described for the floorstand model.

ÊClose the server.1

ÊConnect the cables. 1

ÊConnect the server to the power outlet.1

ÊStart the operating system.1

ÊIf necessary, configure the server as required.1

1These procedures are described in the Operating Manual.

Andere Handbücher für PRIMERGY TX150 S6

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu SPARC Enterprise M8000 Service-Handbuch

Fujitsu

Fujitsu SPARC Enterprise T5140 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 480 Technisches Handbuch

Fujitsu

Fujitsu PRIMERGY TX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX330 S1 Betriebsanleitung

Fujitsu

Fujitsu SE700 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M10-4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX600 S3 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 Bedienungsanleitung

Fujitsu

Fujitsu l ETERNUS AF Bedienungsanleitung

Fujitsu

Fujitsu PRIMEPOWER 650 Kurzanleitung

Fujitsu

Fujitsu PRIMERGY RX100 S6 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S720 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1310 M3 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S3 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S3 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX120 Leitfaden

Fujitsu

Fujitsu PRIMERGY BX600 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Kurzanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung