Fujitsu PRIMERGY TX300 S5 Betriebsanleitung

Produktfamilie

PRIMERGY TX300 S5

Server

Service Supplement

Redakteur

Fujitsu Technology Solutions GmbH München

81730 München

e-mail: [email protected]su.com

Tel.: (089) 61001-???

Fax: 0 700 / 372 00000

PRIMERGY TX300 S5

Sprachen: En

Edition May 2009

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]ujitsu.com.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

PRIMERGY TX300 S5 Service Supplement

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Documentation overview . . . . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 8

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1.2 Removing the front cover . . . . . . . . . . . . . . . . . . 17

Ê . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.1.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.1.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . 18

4.1.2.2 Removing the rack front cover . . . . . . . . . . . . . . . . 18

4.1.3 Removing the fan carrier . . . . . . . . . . . . . . . . . . . . . 19

4.1.4 Removing / mounting the cable cover . . . . . . . . . . . . . . 20

4.2 Replacing the operating panel module . . . . . . . . . . . . 22

4.3 Replacing PSU riser cards . . . . . . . . . . . . . . . . . . . 28

4.4 Replacing the 3.5-inch HDD backplane . . . . . . . . . . . . 33

4.5 Replacing the 2.5-inch HDD backplane . . . . . . . . . . . . 38

4.5.1 Replacing the 12 x 2.5-inch HDD backplane . . . . . . . . . . 38

4.5.2 Replacing the 4 x 2.5-inch HDD backplane

(HDD extension box) . . . . . . . . . . . . . . . . . . . . . . . 47

4.6 Replacing the fan board . . . . . . . . . . . . . . . . . . . . 52

4.7 Replacing intrusion switches . . . . . . . . . . . . . . . . . 55

4.8 Replacing the chassis ID board . . . . . . . . . . . . . . . . 63

Service Supplement PRIMERGY TX300 S5

Contents

4.9 Replacing the system board . . . . . . . . . . . . . . . . . . 65

4.10 Replacing the DC-DC Inverter Board . . . . . . . . . . . . . . 71

4.11 Replacing the TPM board . . . . . . . . . . . . . . . . . . . . 74

4.12 Replacing the UFM board . . . . . . . . . . . . . . . . . . . . 76

5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

5.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

5.1.1 Operating panel board . . . . . . . . . . . . . . . . . . . . . . 79

5.1.2 Front USB board . . . . . . . . . . . . . . . . . . . . . . . . . 80

5.1.3 DC-DC inverter board . . . . . . . . . . . . . . . . . . . . . . . 81

5.1.4 6 x 3.5-inch HDD backplane . . . . . . . . . . . . . . . . . . . 82

5.1.5 2 x 3.5-inch HDD backplane

(HDD extension box) . . . . . . . . . . . . . . . . . . . . . . . 83

5.1.6 12 x 2.5-inch HDD backplane . . . . . . . . . . . . . . . . . . . 84

5.1.7 4 x 2,5-inch HDD backplane

(HDD extension box) . . . . . . . . . . . . . . . . . . . . . . . 85

5.1.8 Fan board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

5.1.9 PSU riser card . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

PRIMERGY TX300 S5 Service Supplement 5

1 Introduction

The PRIMERGY TX300 S5 Server is an Intel-based server for medium-sized

and large networks. The server is suitable for use as a file server as well as an

application, information, or Internet server. It is available as a floorstand or rack

model. The floorstand model can be converted to a rack model using an optional

conversion kit.

1.1 Documentation overview

Concept and target groups

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

Service DVD

Service partners of Fujitsu Technology Solutions can order a Service DVD

PRIMERGY. On the DVD the following manuals are available in pdf format:

– The “Safety notes and other important information” manual

– The Operating Manual for PRIMERGY TX300 S5

– The Technical Manual for the system board D2619

– The Options Guide for PRIMERGY TX300 S5

– The Service Supplement PRIMERGY TX300 S5

– The “D2619 BIOS Setup Utility” manual

6 Service Supplement PRIMERGY TX300 S5

Documentation overview Introduction

Information/procedure Manual

Detailed safety notes “Safety notes and other

important information”

manual

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External ports

– Operation

– Configuration of the server

– Installation of the rack mounting kit

Troubleshooting

Installation/removal or replacing of

CSS components:

– Hot-plug power supply units

– Hot-plug hard disk drives

– Memory modules

– System fans

– Expansion cards

Information about the system board:

– Features of the system board

– Board layout

– Jumper settings

–LEDdisplays

– Replacing the battery

Technical Manual

Table 1: Overview of the documentation TX300 S5

PRIMERGY TX300 S5 Service Supplement 7

Introduction Documentation overview

Extensions and upgrades:

IFor some components only the installation

routine is described in the Options Guide.

Removing these components proceed in

reverse order.

– Expanding/replacing the main memory

– Installing a second processor / replacing the

processor / replacing the heat sink

– Installing accessible drives, like floppy disk

drive, DVD/DVD-RW drive, multibay etc.

– Installing a hard disks extension box

– Installing a LSP or a LSD

– Installing expansion cards in the PCI slots

– Inserting the RAID key

– Installing the UFM module

– Installing the TPM module

– Converting to redundant fans

– Converting from the floorstand model to the

rack model

Options Guide

Cabling

Replacement routines:

– Replacing the operating panel board

– Replacing the front USB board

– Replacing PS riser cards

– Replacing the 3.5“ HDD backplane

– Replacing the 2.5“ HDD backplanes

– Replacing the intrusion switches

– Replacing the chassis ID board

– Replacing the system board

– Replacing the TPM board

Service Supplement

Board layout

BIOS setup BIOS Setup

Information/procedure Manual

Table 1: Overview of the documentation TX300 S5

8 Service Supplement PRIMERGY TX300 S5

Notational conventions Introduction

1.2 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands or menu items.

„Quotation marks“ indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Table 2: Notational conventions

PRIMERGY TX300 S5 Service Supplement 9

2Procedure

VCAUTION!

The actions described in these instructions should only be performed by

service personnel.

ÊFirst of all please familiarize yourself with the safety instructions in the

section chapter “Safety notes” on page 11 et seq. .

ÊEnsure that all required manuals (see Service DVD) are available, print out

the PDF files if necessary. You will definitely need the Operating Manual for

the server, the Options Guide for the server and the Technical Manual for the

system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the chapter “Replacement routines” on

page 17 et seq. .

ÊReplace the defective component as described in the relevant chapter.

IProcedures which are identical for the floorstand and rack models are

only described for the floorstand model.

ÊClose the server.1

ÊConnect the cables. 1

ÊConnect the server to the power outlet.1

ÊStart the operating system.1

ÊIf necessary, configure the server as required.1

1These procedures are described in the Operating Manual.

Andere Handbücher für PRIMERGY TX300 S5

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY RX2510 M2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX120 Leitfaden

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX100 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S2 Kurzanleitung

Fujitsu

Fujitsu FUTRO S450 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 3000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2530 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY ECONEL30 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S720 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO Z220 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY SX05 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S7 Bedienungsanleitung

Fujitsu

Fujitsu primergy h250 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 50 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S3 Betriebsanleitung

Fujitsu

Fujitsu Primergy BX920 S4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S2 Leitfaden

Fujitsu

Fujitsu PRIMERGY RX220 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX100 S7 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung