FuzzDog KlonBuffer V3 Bedienungsanleitung

Klon Buffer V3

Invigorate your signal

No reproduction permitted without the express written

Schematic

BOM

R1,2 100K

R3 1M

R4 100k

R5 560R

CLR 2K2

C1 47u

C2 100n

C3 1u

IC L072

D1 1N4001

What’s it going to do?

It’ll retain your signal’s top end

despite your lengthy cable run (and

unseen extra length and obstacles

caused by true-bypass in your pedals).

How?

Through some mighty clever jiggery-

pokery concerning input impedance

hich makes the guitar pickups ork

the ay they ere designed to, rather

than ho your home-made Fuzz Face

is trying to make them.

Basically it’ll make your signal as

lovely as it ould be if you plugged

straight into your amp.

Very simple build, and switch-free.

Basically it should sit at the very start

of the signal chain on your pedal

board, and remain on all the time.

here’s no reason to switch it on or

off, or to bypass it.

If you do want to do either of the

above, just wire it up with your own

preferred switch. It won’t do any

harm.

his circuit is standard, Negative

GND. Your power supply should be ip

Negative / Sleeve Positive. hat’s the

same as your standard pedals (Boss

etc), and you can safely daisy-chain

your supply to this pedal.

If you don’t want to have the LED, just

omit CLR and don’t connect the LED

at all.

he kit comes with a socket for the IC,

though the chip is shown soldered

straight to the board on the cover

image.

Long (anode) legs of the electrolytic

caps go into the square pads.

Striped (cathode) leg of D1 goes into

the square pad.

o save some height you can bend C1

over the top of R2,4 as shown on the

cover image.

Wire it up

All the grounds must connect together somehow (both jacks, DC socket, PCB,

LED). hey don’t all have to connect to a single point - they can be daisy

chained. For instance, looking at the diagram above, the ground lug of the IN

jack could connect to the ground lug of the OU jack rather than the DC

socket. It’d still be connected to ground via the OU jack ground connection.

he long (+) leg of the LED should connect to the LED pad on the PCB. he

short (-) leg connects to any ground point.

PedalParts.co.uk

Andere FuzzDog Musikpedal Handbücher

FuzzDog

FuzzDog JenFuzz Bedienungsanleitung

FuzzDog

FuzzDog Rodent Bedienungsanleitung

FuzzDog

FuzzDog Big Skweez Bedienungsanleitung

FuzzDog

FuzzDog Toxic Minx Distortion plus Bedienungsanleitung

FuzzDog

FuzzDog Shin-Ei FY2 Companion Fuzz Bedienungsanleitung

FuzzDog

FuzzDog Brian May Treble Boost Bedienungsanleitung

FuzzDog

FuzzDog BSIAB2 Bedienungsanleitung

FuzzDog

FuzzDog Animatron Bedienungsanleitung

FuzzDog

FuzzDog Axis Fuzz Bedienungsanleitung

FuzzDog

FuzzDog Cocoon Bedienungsanleitung

FuzzDog

FuzzDog Gristleiser Bedienungsanleitung

FuzzDog

FuzzDog AB/Y Bedienungsanleitung

FuzzDog

FuzzDog SimpleTestRig Bedienungsanleitung

FuzzDog

FuzzDog Mutant Fuzz Bedienungsanleitung

FuzzDog

FuzzDog Repeater V4 Bedienungsanleitung

FuzzDog

FuzzDog Hot Snake Boost Bedienungsanleitung

FuzzDog

FuzzDog PHASE 90 Bedienungsanleitung

FuzzDog

FuzzDog Filth Fack! Bedienungsanleitung

FuzzDog

FuzzDog Super Fuzz Bedienungsanleitung

FuzzDog

FuzzDog Ruby/NoisyCricket Bedienungsanleitung

FuzzDog

FuzzDog Pussy King Bedienungsanleitung

FuzzDog

FuzzDog Big Fluff Pie Bedienungsanleitung

FuzzDog

FuzzDog Flender Bedienungsanleitung

FuzzDog

FuzzDog Electrica+ Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung

BYOC

BYOC Analog Chorus Handbuch

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung