Gilson HM-396 Bedienungsanleitung

(Continued on back.)

INTRODUCTION

The versatile HM-396 Load Frame can be utilized for multiple soil

tests. California Bearing Ratio (CBR), Unconned Compressive

Strength, Soil Cement, and Triaxial tests can all be performed

when tted with the required Component Set. This 10,000lbf

(44.5kN) capacity frame has a strain rate of 0.001 – 0.1 in/min

(0.0254 – 2.54 mm/min) controlled to +/- 1% of set point. Front

panel controls allow the operator to adjust the direction and

speed of the platen. The strain rate is set using the calibration

chart and the three-segment thumbwheel selector. Sliding

the cross-arm up or down the coarse-threaded 1.25in (32mm)

diameter rods and tightening the nuts makes adjustment for the

wide variety of testing components quick and easy.

FEATURES

• Precision adjustable strain rate of 0.001—0.1in/min (0.0254—

2.54mm/min) allows for multiple testing options (calibration

chart included)

• Powerful 1/8hp DC drive motor

• Load capacity up to 10,000lbf (44kN)

• Durable 14-gauge steel cabinet and precision loading screw

with protective rubber boot

• Hardened steel 8in (203mm) diameter platen accepts a wide

variety of test xtures

• Heavy 1.25in (31.8mm) diameter vertical rods with coarse threads

• Front panel controls

• Upper and lower limit indicator lights

• Three-position control switch with built-in hesitation prevents

motor damage when reversing direction

• Corrosion-resistant components

UNPACKING & SET UP

1. Inspect your HM-396 for damage, remove it from the pallet.

2. Place the Load Frame on a sturdy, level surface such as a bench

top or HMA-94 Rolling Load Frame Cart. HM-396

Gilson Load Frame

10,000lbf (44.5kN), 0.001—0.1mm/min

HM-396 and HM-396F

OPERATING MANUAL

Rev: 09/2019

PHONE: 800-444-1508 P.O. Box 200, Lewis Center, Ohio 43035-0200

740-548-7298 E-mail: customerservice@gilsonco.com Product Web Page: www.globalgilson.com

FAX: 800-255-5314

740-548-5314

California Bearing Ratio (CBR)

ASTM D1883; AASHTO T 193

HMA-684 6,000lbf load ring, dial indicator, piston

HMA-685 10,000lbf load ring, dial indicator, piston

HMA-685D 10,000lbf load cell, LVT, readout box, piston

Soil Cement

ASTM D1632, D1633

HMA-687 10,000lbf load ring, dial indicator, 4 in platen

HMA-687D

10,000lbf load cell , LVT, Readout box, 4 in platen

Triaxial

ASTM D2850, D4764; AASHTO T 296, T 297

HMA-686 1,000lbf load cell, dial indicator

HM-413 1,000lbf load cell, LVT, Readout box

Unconned Compressive Strength

ASTM D2166; AASHTO T 208

HMA-681 500lbf load ring, dial gauge, plastic discs

HMA-683 1000lbf load ring, dial gauge, plastic discs

HMA-683D 1,000lbf load cell, dial gauge, plastic discs

COMPONENT SETS

3. Connect to a properly grounded power supply with correct

voltage and amperage to output.

4. Adjust and level the crossarm to the appropriate height.

5. Install required Component Set and any accessories required

for testing.

CONTROLS

1. Main Power On/O: Includes an indicator light to show

when the power is on

2. Platen Direction: Three-position switch (up, down and o)

includes built-in hesitation to prevent motor damage when

reversing direction

3. Limit Lights: Indicates when upper and lower limits are at-

tained

4. Strain Rate: Three-segment thumbwheel selector (strain

rate calibration chart included)

5. Jog Button: Increases the speed of platen to the maximum

speed of the load frame jack screw (0.1in/min) when the

switch is pushed to the up position.

OPERATING INSTRUCTIONS

WARNING!

Disconnect and lock out power supply when servicing the

unit or installing components.

1. Read all safety and operating instructions before operating

the unit.

2. Power the unit with the Main Power switch (indicator light

will show that the unit is on).

3. Based on the calibration chart (included), set the desired

strain rate for the test using the three-segment thumbwheel

selector.

4. Use the Platen Direction and High-Speed Jog switches to ad-

just the direction and speed of the platen for testing.

5. Center the Platen Direction switch to the o position when

the test is complete.

6. Refer to ASTM and/or AASHTO test methods for specic test

instructions.

Accessories

HMA-94 Rolling Load Frame Cart

Dieses Handbuch passt für folgende Modelle

Andere Gilson Laborausrüstung Handbücher

Gilson

Gilson Trackman Bedienungsanleitung

Gilson

Gilson PIPETMAN P2L Bedienungsanleitung

Gilson

Gilson PIPETMAN P20 Bedienungsanleitung

Gilson

Gilson 157 Bedienungsanleitung

Gilson

Gilson PIPETMAN P Bedienungsanleitung

Gilson

Gilson ASPEC Bedienungsanleitung

Gilson

Gilson PIPETMAX 268 Service-Handbuch

Gilson

Gilson macroman Bedienungsanleitung

Gilson

Gilson PLATEMASTER P20 Bedienungsanleitung

Gilson

Gilson SGA-5RT Bedienungsanleitung

Gilson

Gilson P10M Bedienungsanleitung

Gilson

Gilson Power Carrousel Bedienungsanleitung

Gilson

Gilson SS-15D Bedienungsanleitung

Gilson

Gilson GX-27X Series Bedienungsanleitung

Gilson

Gilson 223 Bedienungsanleitung

Gilson

Gilson PIPETMAN L Bedienungsanleitung

Gilson

Gilson Pipetman Fixed Bedienungsanleitung

Gilson

Gilson Pipetman Classic Series Bedienungsanleitung

Gilson

Gilson PIPETMAN G Bedienungsanleitung

Gilson

Gilson PIPETMAN Neo P2N Bedienungsanleitung

Gilson

Gilson Pipetman M Bedienungsanleitung

Gilson

Gilson PIPETMAX 268 Bedienungsanleitung

Gilson

Gilson Extractman Bedienungsanleitung

Gilson

Gilson pipetman Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung