GoMax Electronics MT-503A Bedienungsanleitung

MT-503A

HDMI and 3G-SDI Cross and Scaler Converter with 3.5”

LCD monitor, and audio embedder/ de-embedder

User Manual

rev: 201215

Made in Taiwan

TABLE OF CONTENTS

INTRODUCTION..................................................................................................................................... 1

FEATURES...............................................................................................................................................1

PACKAGE CONTENTS....................................................................................................................... 2

SPECIFICATIONS................................................................................................................................. 3

PANEL DESCRIPTIONS .................................................................................................................... 4

CONNECTION DIAGRAM.................................................................................................................. 5

OSD MENU ............................................................................................................................................. 6

RESOLUTION SPECIFICATIONS................................................................................................... 9

FIRMWARE UPDATE STEPS..........................................................................................................10

WARRANTY ........................................................................................................................................... 11

-1-

INTRODUCTION

The MT-503A HDMI and 3G/HD/SD-SDI Bi-directional scaler Converter with 3.5” LCD Monitor,

Audio Embedder/Extractor & local loopout is an advanced HDMI and SDI cross-conversion monitor

with multi-format and multi-pattern support. Not only can it receive signals, the MT-503A can also

extend HDMI or SDI input signals through SDI loop-out. It is equipped three buttons and a 3.5” panel to

ease the control. With a 3.5” panel, the output signal can be monitored and controlled through OSD,

such as resolution and image adjustments. This device can also be used as a tool for eye diagram

scanning to check the quality of the SDI cable input. In addition, it provides a variety of test patterns,

which can be used as a simple pattern generator. The MT-503A provides a cost effective way to the

monitor video devices and displays.

FEATURES

Input Video support

[3G] 1080p @50/59.94/60Hz (4:4:4)

[HD] 720p @50/59.94/60Hz, 1080i @50/59.94/60Hz, 1080p @24/30Hz

[SD] NTSC @59.94Hz, PAL @50Hz

Input bandwidth 2.970Gbps

Output maximum pixel rate: 165MHz

Multiple VESA standards support for output video resolutions

Deinterlacing supported

Built-in test patterns

HDMI and SDI cross conversion :

Simultaneous conversion between SDI to HDMI when HDMI to SDI

Simultaneous conversion between SDI to SDI when HDMI to HDMI

HDMI to SDI and HDMI

SDI to SDI and HDMI

OSD control interface

Push button control

Supports eye diagram scanning

Supports audio level bars

Supports cable length indicator

Supports output test patterns

Supports audio embedding and extraction via stereo

Supports noise reduction and video enhancement features

Video H/V mirror supported

Active video area adjustment supported

USB firmware upgradable for expanded compatibility

-2-

PACKAGE CONTENTS

1x MT-503A

1x DC 12V 2A

1x User Manual

-3-

SPECIFICATIONS

Model Name MT-503A

Technical

Role of usage HDMI and SDI Bi-directional scaler Converter with 3.5” LCD monitor

SDI standards 3G/HD/SD-SDI

Input Video bandwidth 2.970 Gbit/s, 2.970/1.001 Gbit/s

Input Video support

[3G] 1080p @50/59.94/60Hz (4:4:4)

[HD] 720p @50/59.94/60Hz, 1080i @50/59.94/60Hz, 1080p @24/30Hz

[SD] NTSC @59.94Hz, PAL @50Hz

Output Video Frequency

bandwidth 165MHz

Audio support PCM (48KHz only up to 8 channel)

ESD protection

[1] Human body model — ±15kV [air-gap discharge] &

±8kV [contact discharge]

[2] Core chipset — ±2kV

PCB stack-up 8-layer board [impedance control — differential 100; single 50]

Firmware update Feasible via USB Port

CEC Channel N/A

Input 1x HDMI + 1x BNC [SDI] +1x 3.5mm(Stereo)

Output 1x HDMI + 4x BNC [SDI out/loop-out] +1x 3.5mm(Stereo)

BNC connector 3G 75Ωinter-locked socket

HDMI connector Type A [19-pin female]

USB connector Micro USB

Mechanical

Housing Metal enclosure

Dimensions

[L x W x H]

Model

Package

Carton

Weight Model

Package

Power supply 12V DC

Power consumption 8 Watts [max]

Operation temperature 0~40C [32~104F]

Storage temperature -20~60C [-4~140F]

Relative humidity 20~90% RH [no condensation]

-4-

PANEL DESCRIPTIONS

1. SDI OUT: Connect to a 3G/HD/SD-SDI display

2. SDI LOOPOUT: Connect to a 3G/HD/SD-SDI display

3. SDI IN: Connect to a 3G/HD/SD-SDI source

4. HDMI IN: Connect to a HDMI source

5. HDMI OUT: Connect to a HDMI display

6. STEREO AUDIO IN: Connect to analog stereo audio source

7. STEREO AUDIO OUT: Connect to analog stereo audio speaker

8. MICRO USB: F/W update

9. POWER LED: Power LED indicator

10. POWER JACK: 12V DC power

11. PUSH BUTTON:

[LEFT] Enter OSD menu

[MID] OSD UP BUTTON/ Quick source switch for SDI output in cross conversion

[RIGHT] OSD DOWN BUTTON/ Quick source switch for HDMI output in cross conversion

12. 3.5” LCD Monitor

-5-

CONNECTION DIAGRAM

-6-

OSD MENU

Using the On-Screen Display (OSD) menu

To access the OSD menu and make adjustments, do the following:

1. Press the “MENU” button to enter OSD menu or activate a highlighted menu item, and press the “UP” and

“DOWN” button to highlight and adjust items in the menu.

2. Return to the main Menu by selecting “Return” in the OSD menu, and exit the menu by selecting “Exit” in the

main menu.

3. Select the output which you desire to set in Menu Control. HDMI Out is highlighted in yellow and SDI Out is

highlighted in green. When changing the output, the text in the OSD menu will also change to the

representative color.

The following table lists the menu selections in the OSD menu.

Main Menu Item Remark

1. Output Setup

Menu Control HDMI Out, SDI Out

Output Format

[HDMI Out]

Bypass, 640x480 60/72/75, 800x600

60/72/75, 1024x768 60/70/75,

1152x864 75, 1280x768 60/75,

1280x1024 60/75, 1360x768 60,

1366x768 60, 1440x900 75, 1600x1200

60, 1680x1050 RB, SD (480p 60, 576p

50, 480i 60, 576i 50), HD (720p

60/59/50, 1080i 60/59/50, 1080p

60/59/50/30/29/25/24/23)

[SDI Out]

Bypass,

Level B_60 (1080p 60_LEVEL B),

Level B_59 (1080p 59_LEVEL B),

Level B_50 (1080p 50_LEVEL B),

3G (1080p60/59/50/30/29/25/24/23,

1080i 60/59/50),

HD (720p60/59/50),

SD (480i60, 576i 50)

Test Pattern

Disable, White, Color Bar, Stair Gray,

Window, H-Ramp, W-HRamp,

W-VRamp, Diagonal, Red, Green,

Blue, Checkfield, Check-2

Audio Out Follow, HDMI In, SDI In, External,

Sine 48K, Mute

Input Source HDMI In, SDI In

SDI LoopOut SDI In, SDI Out

-7-

Stereo Out External, Sine 48KHz, HDMI In, SDI

Color Space (only HDMI Out) RGB, YCbCr 444, YCbCr 422

2. Image

Contrast 0~255 of Contrast Level

Brightness 0~255 of Brightness Level

Saturation 0~255 of Saturation Level

Hue 0~255 of Hue Level

Gamma Adjust Off, 1.1, 1.3, 0.7, 0.9

Color Tone Off, Green, Skin

Edge Enhance Off, Max, Mid, Min

3. H/V Mirror

H-Mirror Off, On

V-Mirror Off, On

H-Shift 0~200 of H-Shift Level

V-Shift 0~100 of V-Shift Level

Aspect14:3, 16:9, Stretch

4. System

Input Format Input Format information

F/W Version Firmware Version information

Factory Rest No, Yes

Eye Diagram2Quit, Scan

LCD Sleep Never, 10 Secs, 30 Secs, 1 Min, 5

Mins, 10 Mins, 30 Mins

Sine Level (dB) 3 0dB, -6dB, -12dB, -18dB, -24dB,

-30dB, -36dB, -42dB

5. OSD Control4

OSD Enabled

All Disabled, All Enabled, Format &

Range, Format & Audio, Only

Format, Only Audio

Audio Bar Sel. External, Sine 48KHz, HDMI In, SDI

Audio Bar Ch. 2 Ch, 8 Ch, 6 Ch, 4 Ch

Audio Bar Bor. Off, On

6. Exit

-8-

Notes

1. The aspect ratio function can only be set for specific resolutions, including SD (480p 60, 576p 50,

480i 60, 576i 50), and HD (720p 60/59/50, 1080i 60/59/50, 1080p 60/59/50/30/29/25/24/23).

2. The eye diagram will display the measured Amp. (amplitude) and Jit. (jitter) value of the SDI input

signal.

3. Set the volume of the built-in audio in Sine Level (dB). The following table lists the corresponding

levels of Sine Level in the audio bar.

Sine Level (dB) 0dB -6dB -12dB -18dB -24dB -30dB -36dB -42dB

Level Display 14 10 8 6 5 3 2 1

4. Set the OSD information mode to be displayed on the LCD monitor in OSD control.

OSD Enabled No. Description

Format 1-4

The format will display the resolution of HDMI and SDI input/output on

the upper side of the LCD monitor.

[1] HDMI Input, [2] HDMI Output, [3] SDI Input, [4] SDI Output

Rang 5

The display of Range depends on the characteristics, length and quality of

the coaxial cable. Take the Belden 1694A coaxial cable as an example.

The range will display as below :

Cable Type Belden 1694A

Cable Length

1M 5M 50M 100M

Test Result S(Short)

S(Short)

L(Long) L(Long)

Audio 6

Select the audio bar display source in Audio Bar Sel. Sine 48KHz is a

built-in audio option. In addition, select the channel in Audio Bar Ch, and

the corresponding number of Audio Bar will be displayed on the right side

of the LCD monitor.

-9-

RESOLUTION SPECIFICATIONS

SDI HDMI

[SD]

480i @ 60

576i @ 50

[HD]

720p @ 50/59.9/60

1080i @ 50/59.9/60

1080p @ 23.9/24/25/29.9/30/50/59.9/60

1080p @ 50/59.9/60_ Level B

[SD]

480i @ 60

576i @ 50

480p @ 60

576p @ 50

[HD]

720p @ 50/59.9/60

1080i @ 50/59.9/60

1080p @ 23.9/24/25/29.9/30/50/59.9/60

[Other]

640x480 @ 60/72/75

800x600 @ 60/72/75

1024x768 @ 60/70/75

1152x864 @ 75

1280x768 @ 60/75

1280x1024 @ 60/75

1360x768 @ 60

1366x768 @ 60

1440x900 @ 75

1600x1200 @ 60

1680x1050 @ RB

-10-

FIRMWARE UPDATE STEPS

1. Remove the power adapter from PRO-ScalerSDIHD.

2. Connect PRO-ScalerSDIHD and PC/laptop via micro USB cable.

3. Open update tool and load the firmware file.

4. Click connect and plug the power adapter.

5. Click start to activate the firmware update process.

6. Power cycle PRO-ScalerSDIHD.

-11-

WARRANTY

The SELLER warrants the MT-503A HDMI and 3G/HD/SD-SDI Bi-directional scaler Converter with

3.5” LCD Monitor, Audio Embedder/Extractor & local loopout to be free from defects in the material

and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer.

Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its

option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster,

abuse or any unauthorized modifications including static discharge and power surges.

Unit that fails under conditions other than those covered will be repaired at the current price of

parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of

reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume

the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return

authorization number.

The warranty is in lieu of all other warranties expressed or implied, including without limitations,

any other implied warranty or fitness or merchantability for any particular purpose, all of which are

expressly disclaimed.

Proof of sale may be required in order to claim warranty. Customers outside Taiwan are

responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day warranty and

cable must be free from any markings, scratches, and neatly coiled.

The content of this manual has been carefully checked and is believed to be accurate. However,

The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The

SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting

from any defect or omission in this manual, even if advised of the possibility of such damages. Also,

the technical information contained herein regarding the MT-503A features and specifications is

subject to change without further notice.

Inhaltsverzeichnis

Andere GoMax Electronics Medienkonverter Handbücher

GoMax Electronics

GoMax Electronics SP-2003 Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-509 Bedienungsanleitung

GoMax Electronics

GoMax Electronics SP-5008PZQ Bedienungsanleitung

GoMax Electronics

GoMax Electronics SP-5008PZ Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-1004PF Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-5004MZ2-UF Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-523 Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-3004F Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-513ZK-BI Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-35AK Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-305MLR Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-900S Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-3004 Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-910S Bedienungsanleitung

GoMax Electronics

GoMax Electronics VW-1312P Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-C03S Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-5004MZ2E-CF Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-5022 Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-105S Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-5004MZ2F Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-300 Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-1010 Bedienungsanleitung

GoMax Electronics

GoMax Electronics SP-9112 Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-5004MZF Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung