GoMax Electronics MX-5004MZF Bedienungsanleitung

4x1 HDMI 2.0a Quad-View Video Processor

with 4K2K60 4:4:4

User Manual

rev: 160727

Made in Taiwan

MX-5004MZF

Safety and Notice

The MX-5004MZF 4x1 HDMI 2.0a Quad-View Video Processor with 4K2K60 4:4:4 has been

tested for conformance to safety regulations and requirements, and has been certified for

international use. However, like all electronic equipment, the MX-5004MZF should be used with care.

Please read and follow the safety instructions to protect yourself from possible injury and to minimize

the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device

before cleaning.

TABLE OF CONTENTS

INTRODUCTION.................................................................................................................1

FEATURES.........................................................................................................................1

PACKAGE CONTENTS......................................................................................................1

SPECIFICATIONS..............................................................................................................2

HARDWARE INSTALLATION.............................................................................................3

CONNECTION DIAGRAM ..................................................................................................3

PANEL DESCRIPTIONS.....................................................................................................4

OPERATION APPROACH..................................................................................................5

WARRANTY .....................................................................................................................16

INTRODUCTION

The MX-5004MZF 4x1 HDMI 2.0a Quad-View Video Processor with 4K2K60 4:4:4 provides

the most flexible and cost effective solution in the market to route high definition video source

from any of the four FHD HDMI sources to the remote display at the same time. This solution is

well suited for use in digital signage, conference room presentation systems or other similar

settings or applications.

With up to 4K2K60 4:4:4 output resolution, users can display the mixed video with improved

presentation quality. In the meantime, the unit can be controlled thru the popular serial port and

Ethernet port to provide the most flexible control way to fit into any applications.

FEATURES

4x HDMI inputs and 1x HDMI output

Input resolution supports from 640x480 to 1920x1200, interlaced or progressive

Output resolution supports up to 4K2K@60Hz (4:4:4 8bits)

Adjustable size & position through software

Supports HDCP 1.4 compliant

Firmware upgradable for support of new features and technology enhancements

Titles, borders and colored backgrounds

Resize, position, zoom & pan and blend output video

Perfect as a video converter and a video switcher

Software control through RS-232 and Ethernet

Supports IR remote control

Supports one input rotation

Supports Pixel by Pixel mapping under 2x2 configuration

PACKAGE CONTENTS

1x MX-5004MZF

1x DC 12V 5A

1x Installation software CD

1x User Manual

1x IR Remote control (28 keys)

1x IR Receiving cable

SPECIFICATIONS

Model Name

MX-5004MZF

Technical

Role of usage

Multiplexer / video processor

Background picture update

Yes

HDCP compliance

1.4

HDMI compliance

Input: HDMI 1.4

Output: HDMI 2.0a

Video bandwidth

Input: HDMI [2.25G to 6.75Gbps]

Output: Single-link 600MHz [18Gbps]

Output Video Support

Up to 4K2K@60 (4:4:4 8bits)

Input Video Support

Up to 1920x1200@60

Video Format Support

Up to HDMI 2.0

Audio support

Bypass

Control

RS-232/ IP Control/ Front Panel

Embedded video mixer

Yes

Input TMDS signal

1.2 Volts [peak to peak]

ESD protection

Human body model — ±15kV [air-gap discharge] & ±8kV [contact

discharge]

Input

4x HDMI + 1xRS-232 + 1x RJ-45(Ethernet)

Output

1x HDMI

HDMI connector

Type A [19-pin female]

RS-232 connector

DE-9 [9-pin D-sub female]

RJ-45 connector

WE/SS 8P8C

Mechanical

Housing

Metal enclosure

Dimensions

(L x W x H)

Model

390 x 224 x 42mm [1'3" x 8.8" x 1.6"]

Package

526 x 318 x 156mm [1'7" x 12.5" x 6.1"]

Carton

543 x 335 x 344mm [1'8" x 13.2" x 1'1"]

Weight

Model

2.3 kg [5.2 lbs]

Power supply

12V 5A DC

Power Consumption

8.9 Watts [max]

Operation temperature

0~40°C [32~104°F]

Storage temperature

-20~60°C [-4~140°F]

Relative humidity

20~90% RH [no condensation]

HARDWARE INSTALLATION

MX-5004MZF as master

1. Connect all sources to HDMI Inputs on the MX-5004MZF.

2. Connect the display to HDMI Output on the MX-5004MZF.

3. Connect the +12V 5A DC power supply to the MX-5004MZF.

CONNECTION DIAGRAM

PANEL DESCRIPTIONS

MX-5004MZF

Front Panel

1. LABEL: All Windows label on/off

2. FULL SCREEN: Switch Window in full screen mode

3. Windows Source Selection A-D: Window A-D source selection

4. Default Layout PAP: Four different default layout PAP mode

5. IR SENSOR: IR sensor for receiving the IR commands from IR remote

6. Rotation: Window A rotate 90° or -90°

7. 4K2K / 1080p: Switch output resolution in 4K2K@60 / 1080p

8. F1 & F2: Reserved

Rear Panel

9. SOURCE 1-4: HDMI inputs

10. Stereo audio output - L

11. Stereo audio output - R

12. RS-232: RS-232 control port

13. OUTPUT: HDMI output

14. Ethernet: Ethernet control port

15. +12V DC: 12V DC power jack

OPERATION APPROACH

Method A: IR Remote Control

Button Function

F1 HDMI/DVI mode switch

F2 Reserved

F3 Reserved

Power on/off the device

Rotation Window A rotate 90° or -90°

Label Window label on/off

Sound Fast Switch output’s audio

channel

Background To set up the background

picture of window

4K2K Select 4K2K output

resolution

1080P Select 1080P@60 output

resolution

720P Select 720P@60 output

resolution

Mute Mute the audio output

Custom layout 1 Custom layout 1

Custom layout 2 Custom layout 2

Custom layout 3 Custom layout 3

Custom layout 4 Custom layout 4

Custom layout 5 Custom layout 5

Custom layout 6 Custom layout 6

Custom layout 7 Custom layout 7

Custom layout 8 Custom layout 8

PAP 2 Default layout PAP

PAP 3 Default layout PAP

PAP 4 Default layout PAP

PAP 5 Default layout PAP

Full screen layout A Window A in full screen

Full screen layout B Window B in full screen

Full screen layout C Window C in full screen

Full screen layout D Window D in full screen

Method B: Software Control through RS-232 port / Ethernet port

System Requirement and Precautions

1. Whenever power off MX-5004MZF, please stay unpowered at least 5 to 10 seconds to allow power

capacitors to discharge.

2. The MX-5004MZF provides software control program which runs under Microsoft Windows 98,

2000, XP, 7, 8 through the interface of RS-232 serial control.

3. Before clicking on the icon of the software, make sure you have secured the connection between

your computer COM port and the MX-5004MZF.

Start the software control program

When clicking on the executable file, the following dialog will pop-up. There are two ways to control the

MX-5004MZF device (under Microsoft Windows 7, please run as administrator).

RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct COM port

and click the OK button.

Ethernet Mode: Enter the IP address of the device and click the OK button.

After the software control setting is accomplished, it will enter directly to control interface.

Control Interface

1. Connection Status:

Show the connect information and status. If users use RS-232 serial Mode to connect device,

the graph is . In contrast, the graph of Ethernet is . In addition, if users would like to

change the control method, users can click on the button to change.

2. Output Settings

In this section, users can set up the coordinate for inputs, the source of window A~D, output

resolution, PAP layout setting and input rotation.

(1) Source Selection

For each display window, you can assign arbitrary video source here.

(2) Quick Selection

We provide 9 default modes and 8 custom modes for you to select.

(3) Output Resolution

Set the output resolution. If user click the 1080p to 4K2K function,when output resolution

is 1920 x 1080 @60Hz, it will upscale the resolution to 4K2K.

*In 4K2K@60Hz resolution, the output display will be forced to PAP 1 ( ) layout (other

PAP layout cannot set) and only can set up the output resolution, sound and background

function.

Inhaltsverzeichnis

Andere GoMax Electronics Medienkonverter Handbücher

GoMax Electronics

GoMax Electronics SP-2003 Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-5004MZ2F Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-5004MZ2E-CF Bedienungsanleitung

GoMax Electronics

GoMax Electronics SP-9112 Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-C03S Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-305MLR Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-503M Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-5004MZ2-UF Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-35AK Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-105S Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-900S Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-910S Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-513ZK-BI Bedienungsanleitung

GoMax Electronics

GoMax Electronics VW-1312P Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-523 Bedienungsanleitung

GoMax Electronics

GoMax Electronics VW-1404ZH-G Bedienungsanleitung

GoMax Electronics

GoMax Electronics MT-503A Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-53A Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-3004F Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-503MLR Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-300 Bedienungsanleitung

GoMax Electronics

GoMax Electronics SP-5008PZ Bedienungsanleitung

GoMax Electronics

GoMax Electronics MX-1010 Bedienungsanleitung

GoMax Electronics

GoMax Electronics CV-509 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung