Gossen MetraWatt Starlite 2 Bedienungsanleitung

Starlite 2

Operating Instructions - 15390

2 Gossen Foto- und Lichtmesstechnik GmbH

Preparation……………………………………….

1.1

Battery………………………………………………

1.2

Self-test…………………………………………….

1.3

Selecting the function groups:

DIP switches in the battery compartment……….

Display panel

2.1

The display panel and its elements……………...

2.2

Display duration…………………………………….

2.3

Key Lock…………………………………………….

Operating elements

3.1

ISO1 - IS02; selecting the film speed……………

3.2

Menu………………………………………………...

3.3

Setting wheel……………………………………….

3.4

Measuring buttons M and AVR

3.5

Measuring head with optical viewfinder 1 ° or 5°

Flat dome- spherical dome……..…………………

This is how the Starlite 2 works

4.1

Incident and reflected light measuring…………..

Meas. functions - Ambient light

5.1

Aperture priority…………………………………….

5.2

Exposure time priority……………………………..

5.3

Exposure value EV………………………………...

5.4

Contrast measuring in the t and EV functions…..

5.5

Averaging value AVR in the t and EV functions..

5.6

Selecting the exposure time values……………...

5.7

Taking measurements in the zone system……...

Measuring functions- Flash light

6.1

Flash light measuring……………………………..

6.2

Flash calculation for changed meas. times….…

6.3

Multiple flash calculation………………………….

6.4

Average value……………………………………...

Taking a measuring outside the

measuring range - display range

7.1

Taking a measurem. outside the meas. range…

7.2

Taking a measurement outside the display

range………………………………………………..

Setting and measuring correction values

and extension factors

8.1

Setting correction values………………………….

CINE meter for cinematographers -

PHOTOMETRY

9.1

Preselecting the Cine speeds……………………

9.2

Taking measurements in the CINE function……

9.3

Setting the shutter angle………………………….

Photometry

10.1

Selecting the Photometry display unit…………..

10.2

Meas. the Illumination Lux (Ix) or footcandle (fc)

10.3

Measuring the luminance candela/m² (cd/m²)

or footLambert (fL)………………………………..

10.4

Measuring time-integral values

(lxs, fcs, cds/m2, fLs)……………….……………..

Practical tips………………………………………

Technical data…………………………………….

Service Interface…………………………………

Service……………………………………………..

Gossen Foto- und Lichtmesstechnik GmbH

Measuring head

with optical viewfinder

Display panel

Description

on page 9

ISO1 button

ISO2 button

Socket for

the flash sync cord

Menu buttons

Retractable dome

Dome ring for setting of

reflected/incident light measuring

Reflected light measuring 1°

Reflected light measuring 5°

Incident light measuring,

flat dome

Incident light measuring,

spherical dome

4 Gossen Foto- und Lichtmesstechnik GmbH

Optical viewfinder

Measuring button M

Setting wheel

Measuring button AVR

Eyelet

for connection cord

Service-

interface

Gossen Foto- und Lichtmesstechnik GmbH

DIP Switches

Battery

compartment cover

Serial number

6 Gossen Foto- und Lichtmesstechnik GmbH

Your STARLITE 2 is the top device in the GOSSEN

product range and represents a real all-in-one light

meter. It combines a light meter for ambient and flash

light, a CINE meter for cinematographers as well as a

measuring Instrument for lighting technology and

photometry. And the clarity of the operating control

elements and the digital display is still preserved.

Functions used over and above the normal metering

can be individually integrated by the user.

The STARLITE 2 can be easily converted into a

complete CINE meter for the cinematographer and

their needs.

Due to the microprocessor technology, the user

benefits from our knowledge on lighting technology

which we have gained over decades of experience in

the construction of light meters.

As a result of its precise calibration, the STARLITE 2

provides very accurate measuring results and is easy

to operate.

Characterising of the STARLITE 2:

- Splashwaterproof housing

- Digital stop display in 1/10 stop increments

- Automatic display Illumination

- Shutter Speeds in full or 1/2 time values

- Second ISO value

- Incident light measuring with spherical/flat dome

- Reflected light measuring, option of 1° or 5°

- Flash measuring (cord/cordless)

- Display of the ambient light portion

- Flash calculation with different measuring times

- Flash calculation for multiple flashes

- Analogue contrast display

with f/stops in 1/2 stop increments

- Averaging of up to 9 measuring values

- Storage of settings and measuring values

- Configurable EV correction

- Measuring in accordance with the zone system

- Direct display of the measuring values on the

zone scale

- Special CINE meter, settable for shutter angles

other than 180 degrees, conversion with

formulas is not necessary

- Functional range of photometry

Measuring of illuminance

and luminance with ambient and flash light

- Key lock

Gossen Foto- und Lichtmesstechnik GmbH

1 Preparation

1.1 Battery

The STARLITE 2 works with a 1.5 V AA battery

(Alkaline-manganese.

When the battery is running low, the BAT display

appears in addition to the measured values as a

warning to the user.

At this stage, it is advisable to replace the battery as

soon as possible.

When BAT appears on the display alone,

measurements can no longer be taken.

Replace the battery immediately.

To replace the battery, open the battery compartment

of the STARLITE 2, remove the old battery and insert

the new one. Observe the "+" and "-" polarity! Please

close the cover of the battery compartment.

1.2 Self-test

After the new battery has been inserted, the micro-

computer will carry out a self-test. Here, every display

segment of the display panel appears. The self-test

takes about 10 s. It can, however, be interrupted

before by pressing any button.

As soon as the self-test is complete, the factory preset

standard settings are activated.

ISO1 100/21° 0/1,0

ISO2 50/18°

f5,6 t1/125

EV 12 Blitz f 1/60

f/s 24

Warning!

Do not view and do not aim the meter directly

at the sun.

You may not only damage your eye, but also ruin the

light-sensitive cell.

8 Gossen Foto- und Lichtmesstechnik GmbH

1.3 Selecting the function groups:

DIP switches in the battery compartment

In addition to the standard functions, your STARLITE 2

features a range of additional characteristics and

functions which can be selected using the

"DIP switches" in the battery compartment.

- DIP 1 Selection STILL –Photography

CINE und PHOTOMETRY

- DIP 2 Selection SHUTTER SPEEDS (1/1 or 1/2)

- DIP 3 Selection DISPLAY UNIT photometry

- DIP 4 Selection Measuring function - ZONES

Zone System

fc fl

1/2 t-Steps

CINE

lx cd/m²

1/1 t-Steps

STILL

DIP 4

DIP 3

DIP 2

DIP 1

Gossen Foto- und Lichtmesstechnik GmbH

2 Display panel

2.1 The display panel and ist elements

1 Menu

- Ambient light

- Flash light

2 Measuring head

- Incident light measuring

- Reflected light measuring

3 Meter functions

- Photography

- Cine / Photometry

4 Film speed ISO1 - ISO2

5 Digital display of the film speed

6 Display signal f- EV

7 Display signal Zone

8 Display signal –Function correction value

9 Display signal t–f/s

10 Battery check warning signal

11 Display signal second (s) –minutes (m)

12 Display signal AVR u. M(memory)

13 Display signal photometry

- Illuminance (lx –fc)

- Luminance (cd/m2–fL)

- Time integral values

( lx*s –fc*s –cd/m2*s –fc*s)

14 Analogue scale

15 left digital displays for

- f-stop (f)

- Exposure value (EV)

- Correction values

- Multiple flash calculation

- Average (f) –Number of measurings

- Zone

- Ready for flash (F)

- Photometric measuring values

16 Right digital display for

- Exposure time (t)

- Extension factor –correction value

- Flash calculation, number of flashes

- Cine speeds (f/s)

17 Zone scale

18 Aperture scale

6 1 7 2 13 3 8 4 9 5 10

14 12 15 12 16 1718 11

10 Gossen Foto- und Lichtmesstechnik GmbH

2.1.1 Automatic display illumination

When the lighting conditions are poor (about EV 4 or

less), the background lighting of the displayis switched

on automatically for 10 seconds.

2.2 Display duration

If the STARLITE 2 display panel is idle for about

2 minutes, it is switched off automatically. The

measuring values and the preset values remain

stored in memory.

- By pressing anyone of the buttons, you can recall

the measuring value from the memory.

- By pressing the measuring button M, a new

measurement is taken.

The measuring values of the last measurement remain

stored in the memory until a new measurement is

taken.

The STARLITE 2 has separate memories for ambient

and flash light measuring.

2.3. Key Lock

lt makes sense to activate the key lock to avoid

switching on the STARLITE 2 by accident.

- Activating the key lock: press

ISO1 and IS02 simultaneously.

OFF, ISO and IS02 appear for 3 seconds on the

display. Then the instrument switches off

automatically.

If you press any button, OFF, ISO and IS02 are

displayed again for 3 seconds.

- Deactivating the key lock:

press ISO1 and IS02 simultaneously.

Inhaltsverzeichnis

Andere Gossen MetraWatt Messgerät Handbücher

Gossen MetraWatt

Gossen MetraWatt MAVOWATT 4 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVOSPEC BASE Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt Luna-Pro sbc Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRACLIP 41 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVO-SPOT Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVO-MONITOR Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt Z227O Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt Luna-star F Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVOMASTER Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRACLIP 87 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt DIGISKY Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRACLIP 62 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt PROFISIX Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt DIGISIX 2 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt SECUTEST PRO Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt PROFITEST PV 1500 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVOWATT 210 ROGOWSKI Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRA HIT 22S Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt STARLITE Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRACLIP EARTH Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt lunasix Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVO-MONITOR Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt SECULIFE ITBASE Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt mavolog pro Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung