Gossen MetraWatt MAVOMASTER Bedienungsanleitung

Operating Instructions

MAVOMASTER, MAVOPROBE

Light Metering System 1/09.22

Device Overview, MAVOMASTER with MAVOPROBE

Display

Keypad,

fluorescent

lettering

Rubber holster

MAVOMASTER, Bottom:

- MAVOMASTER serial number

- Battery compartment with lid

MAVOPROBE, Bottom:

- MAVOPROBE serial number

- ¼" tripod thread

USB port

Light receiver

Calibration

seal

Thank you for purchasing the MAVOMASTER-MAVOPROBE light metering system from

GOSSEN.

Please read these operating instructions carefully before using the system for the first

time, and keep them in a safe place for future reference.

The light metering system has a variety of basic product features.

▪Various MAVOPROBES can be used with a MAVOMASTER

▪Impact and slip resistant thanks to rugged rubber holster with tilt stand for convenient

readability during tabletop operation

▪Acquisition of minimum, maximum and mean values

▪Relative and integral measurement

▪Grid measurement for the assessment of workplaces

▪Data logger with adjustable time interval

▪Large measured value memory –measured and function values stored in CSV format

▪Prolonged operation with USB interface via PC, mains power pack or power bank

▪MAVOPROBE can be used in combination with MAVOMASTER or autonomously via USB

▪MAVOPROBE extension cord, 3, 5 or 10 meters

▪3-year guarantee

Content Page

1 Safety Precautions...............................6

2 Disposal..............................................11

3 Initial Start-Up.....................................12

3.1 Inserting the Battery .............................12

3.2 Automatic Shutdown –Continuous

Operation.......................................................12

3.3 Connecting the MAVOPROBE..............13

4 Display Elements and Controls.........14

4.1 Display Elements..................................14

4.2 Controls................................................15

4.3 Operation in the Measuring Mode.........16

4.4 Operation in the Setting Mode..............17

5 Setting Mode.......................................18

5.1 Settings Overview ................................18

5.2 Settings Menu......................................20

5.3 Measuring Menu...................................21

5.4 Storage Menu.......................................22

5.5 Information Menu .................................23

Content Page

6 Measuring Functions..........................24

6.1 REL –Relative .....................................24

6.2 INT –Integral........................................25

6.3 GRID –Grid .........................................26

6.4 B/A –Ratio...........................................27

6.5 %A –Percentage Deviation..................28

6.6 B-A –Relative Deviation.......................29

6.7 LOG –Data Logger..............................30

6.8 PEAK –Extreme Values, Mean Value..31

7 Memory Functions..............................32

7.1 HOLD –Freeze Display........................32

7.2 MEM –Saving Measured Values..........32

7.3 Saving Function Values........................33

7.4 MEM –Deleting Measured Values........33

8 MAVOPROBES ...................................34

8.1 MAVOPROBE LUX 5032 B..................34

8.2 MAVOPROBE LUX 5032 C..................34

8.3 MAVOPROBE MONITOR.....................35

8.4 MAVOPROBE LUX / UVA....................36

9 USB Interface......................................37

9.1 Firmware Update..................................37

10 Accessories........................................38

10.1 Scope of Delivery, MAVOMASTER ......38

10.2 Scope of Delivery, MAVOPROBE.........38

10.3 MAVOMASTER Accessories................38

10.4 MAVOPROBE Accessories..................39

10.5 Calibration Certificates for

MAVOPROBES.............................................41

11 Service Notes......................................42

12 Technical Data....................................43

12.1 MAVOMASTER....................................43

12.2 MAVOPROBE LUX 5032 B..................44

12.3 MAVOPROBE LUX 5032 C..................46

12.4 MAVOPROBE MONITOR.....................49

12.5 MAVOPROBE LUX / UVA....................51

1 Safety Precautions

Explanation of Symbols

Signal words in warnings indicate the nature and severity of possible consequences if measures for the

prevention of the respective hazard are not implemented. The signal words are defined below and may

be used in this document.

Means that serious to life-threatening personal injury may occur

Means that minor to moderately serious personal injury may occur

Note

Means that property damage may occur

Identifies additional information without reference to danger for persons or

property

Identifies important information that should be read before the product is placed

in service

Warning!

Caution

▪In the event of malfunction, switch the meter off immediately. If smoke or odors occur for which the

meter is the cause, remove the battery from the meter –risk of fire and injury.

▪Do not use the meter in proximity to flammable or combustible gases, as there is a risk of fire and

explosion.

▪Keep the meter and all accessories out of the reach of children –risk of suffocation and strangulation

due to parts which can be swallowed, as well as carrying straps and cables.

▪Do not dismantle, modify or repair the meter –risk of injury, fire and electric shock.

▪Do not expose batteries to moisture, high heat or open fire, and never short circuit batteries or

attempt to open them. Use only batteries which are recommended for this meter and which

demonstrate no apparent damage. Improper handling of batteries can result in fire, explosion,

serious injury or environmental damage.

▪When measuring hazardous radiation, observe all applicable safety regulations and use the

stipulated protective equipment. Non-compliance may result in significant impairment of health.

Meter settings and stored measured values are retained when the battery is changed. If you wait too

long to change the battery, it may become necessary to reset date and time.

Warning!

▪Remove the batteries from the meter if it’s not used for lengthy periods of time, or when they’re

fully depleted. In particular in the case of depleted batteries, leakage may occur and the meter

may be damaged.

▪Ensure correct polarity when inserting the battery.

▪When plugging in the measuring probe, make sure that the plug and socket guides are correctly

aligned and avoid the use of excessive force. An incorrectly connected probe can damage the

meter or the probe.

▪Do not use the meter where it is exposed to moisture or rain, and do not immerse it in water. Avoid

operation with wet or damp hands as well. This may result in electric shock or damage to the

meter.

▪Do not dismantle, modify or repair the meter. This may result in erroneous measurement results

or damage to the meter.

Caution

Note

Note identifies precautions or limitations with regard to use of the product. Please read all notes in

order to avoid operating errors.

▪Before starting one-time only measuring tasks, you should first make sure that the meter is

working properly by performing a test measurement.

▪If the meter is used in quality-relevant applications, for acceptance measurements or for

assessments, check to make sure that the meter’s calibration is still valid.

▪If the instrument is subjected to extreme temperature during transport, it requires at least

two hours for acclimatization before it’s switched on.

Limitations

There are several safety precautions and limitations regarding the use of this product. Please

read and understand the following before using the meter.

▪GOSSEN does not accept any liability for damages, costs or lost profits resulting from

malfunctioning or improper use of the meter.

▪GOSSEN reserves the right to make changes of any kind to products or documentation

without issuing prior notice. The latest versions of the documentation, firmware and

software can be downloaded from GOSSEN’s website.

▪Reproduction of product documentation or duplication of any excerpts therefrom

necessitates the express consent of GOSSEN. This applies as well to duplication in any

electronic format and translation into other languages.

Use for Intended Purpose

The meter may only be used under the conditions and for the purposes for which it has been

designed. In this respect, special attention must be given to safety precautions, technical data

regarding ambient conditions and use in dry environments.

Only accessories and replacement parts which have been tested by GOSSEN are permissible for use

in accordance with intended purpose. In case of alterations or modifications implemented by the user,

operating safety can no longer be assured.

Intended Users

The meter is intended for use by the following persons:

▪Persons who monitor and assess the quality of lighting and irradiation systems, lamps,

luminaires and lighting technology products

▪Persons who inspect and assess lighting and irradiation systems for the purpose of

ensuring compliance with design specifications, standards, and regulations

▪Persons who determine and optimize the efficiency of lighting and irradiation systems

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gossen MetraWatt Messgerät Handbücher

Gossen MetraWatt

Gossen MetraWatt Starlite 2 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt Luna-star F Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 2 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVOWATT 4 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt SECULIFE IM Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt Z227O Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt PROFITEST MF Series Betriebsanleitung

Gossen MetraWatt

Gossen MetraWatt PhaseCop2 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt LonWorks ENERGYMID U228 W1 Series Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MID U1281 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAport 40S Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt SINEAX DME 400-1 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRISO INTRO Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt DIGISKY Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVOWATT 210 ROGOWSKI Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRISO C Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVOLUX COMPACT Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt ENERGYSENS Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt PROFITEST PV 1500 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt U1281 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt SECULIFE IA Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRISO G1000 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVOSPEC BASE Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt MAVOLUX 5032C Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung