GReddy Intercooler Kit Bedienungsanleitung
INTERCOOL
INTERCOOLINTERCOOL
INTERCOOLER
ERER
ER
KIT
KITKIT
KIT
ＮＩＳＳＡＮ
ＮＩＳＳＡＮＮＩＳＳＡＮ
ＮＩＳＳＡＮ
ＧＴ－Ｒ
ＧＴ－ＲＧＴ－Ｒ
ＧＴ－Ｒ
Ｒ
ＲＲ
Ｒ３５
３５３５
３５
（ＶＲ
（ＶＲ（ＶＲ
（ＶＲ３８
３８３８
３８ＤＥＴＴ）
ＤＥＴＴ）ＤＥＴＴ）
ＤＥＴＴ）
ＳＰＥＣ－Ｒ
ＳＰＥＣ－ＲＳＰＥＣ－Ｒ
ＳＰＥＣ－Ｒ
ＨＧ
ＨＧＨＧ
ＨＧ
ＴＹＰＥ
ＴＹＰＥＴＹＰＥ
ＴＹＰＥ２９
２９２９
２９
Ｆｕｌｌ
ＦｕｌｌＦｕｌｌ
Ｆｕｌｌ
ＫＩＴ
ＫＩＴＫＩＴ
ＫＩＴ
• Please read the Installation Manual before installing.
Please read the Installation Manual before installing.Please read the Installation Manual before installing.
Please read the Installation Manual before installing.
• Keep this manual for future reference.
Keep this manual for future reference.Keep this manual for future reference.
Keep this manual for future reference.
Model Chassis Code Engine Code Year
ＧＴ－Ｒ ＣＢＡ－Ｒ３５ ＶＲ３８ＤＥＴＴ ０７．１２～
Specs
Specs Specs
Specs ：
：：
：
Cross
CrossCross
Cross-
--
-fl
flfl
flow Type
ow Typeow Type
ow Type
Designed for the Greddy Turbo Kit
Designed for the Greddy Turbo KitDesigned for the Greddy Turbo Kit
Designed for the Greddy Turbo Kit（
（（
（TD
TDTD
TD ０６
０６０６
０６ SH
SHSH
SH-
--
-２０
２０２０
２０ G
GG
G）
））
）
If used with the OEM Turbo, GReddy Airinx Kit required.
Not compatible with the stock air box.
Stock windshield washer tank not compatible with GReddy Intercooler Kit.
GReddy Windshield Washer Tank sold separately.
Stock Intercooler Air Duct is not compatible with GReddy Intercooler Kit.
Installation Manual
Installation ManualInstallation Manual
Installation Manual
Designed to be used on the Nissan R35 GTR. Please do not
attempt to use on other model vehicles.
Using this product may void your warranty from Nissan M
Using this product may void your warranty from Nissan MUsing this product may void your warranty from Nissan M
Using this product may void your warranty from Nissan Motor Co., Ltd. Corporation
otor Co., Ltd. Corporationotor Co., Ltd. Corporation
otor Co., Ltd. Corporation
―１―
１
１１
１．
．．
．Parts List
Parts ListParts List
Parts List
１．Intercooler ＴＹＰＥ－２９ 1
２．Intake tube Ｉ－１ （７０ φ aluminum elbow） 1
３． 〃 Ｉ－２ （７０ φ aluminum） 1
４． 〃 Ｉ－３ （７０ φ aluminum） 1
５． 〃 Ｉ－４ （７０ φ aluminum） 1
６． 〃 Ｉ－５ （７０ φ aluminum elbow） 1
７． 〃 Ｉ－６ （７０ φ aluminum） 1
８． 〃 Ｉ－７ （７０ φ aluminum） 1
９． 〃 Ｉ－８ （７０ φ aluminum） 1
１０．Silicone hose ７０ φ×７０㎜ 12
１１．Hose clamp ＃４４ 24
１２．Intake tube bracket ＲＨ 1
１３．Intake tube bracket ＬＨ 1
１４．Wire Harness （１０００㎜） 8
１５．Bolt Ｍ６×１５㎜ Ｐ１．０ 2
１６．Bolt Ｍ８×２０㎜ Ｐ１．２５ 4
１７．Collar nut Ｍ８ Ｐ１．２５ 4
１８．Nut Ｍ８ Ｐ１．２５ 4
１９．Ｆ/Ｗ Ｍ８ 4
２０．Blow Off Valve Type RZ (page 3 parts lists) １ set
―２―
Parts List Diagram
Parts List DiagramParts List Diagram
Parts List Diagram
１ ２ ３
４ ５ ６
７ ８ ９
１０ １１ １２ １３
―３―
１４ １５～１９ ２０
１．
Blow off valve ×２
６．
Hose Clamp size #16 ×４
２．
Hose attachment ２９ φ ×２
７．
Blow off valve gasket ×２
３．
Rubber cap ３０ φ ×２
８．
Emblem ×２
４．
Vacuum hose ６ φ×３００㎜ ×２
９．
Bolt and washer ×４
５．
Power band ６ φ ×４
１ ２ ３ ４ ５
６ ７ ８ ９
Parts List Diagram
Parts List DiagramParts List Diagram
Parts List Diagram
Blow Off Valve Parts List
Blow Off Valve Parts ListBlow Off Valve Parts List
Blow Off Valve Parts List
―４―
Piping Layout
Piping LayoutPiping Layout
Piping Layout
Turbo LH
Turbo LHTurbo LH
Turbo LH
Turbo RH
Turbo RHTurbo RH
Turbo RH
Throttle LH
Throttle LHThrottle LH
Throttle LH
Throttle RH
Throttle RHThrottle RH
Throttle RH
№
№№
№20
2020
20
Blow Off Valve
Blow Off ValveBlow Off Valve
Blow Off Valve
№
№№
№20
2020
20
Blow Off Valve
Blow Off ValveBlow Off Valve
Blow Off Valve
№
№№
№9
99
9
I
II
I-
--
-8
88
8
№
№№
№5
55
5
I
II
I-
--
-４
４４
４
№
№№
№2
22
2
I
II
I-
--
-1
11
1
№
№№
№3
33
3
I
II
I-
--
-2
22
2
№
№№
№4
44
4
I
II
I-
--
-3
33
3
№
№№
№6
66
6
I
II
I-
--
-5
55
5
№
№№
№7
77
7
I
II
I-
--
-6
66
6
№
№№
№8
88
8
I
II
I-
--
-7
77
7
―５―
２
２２
２．
．．
．Removal of Stock Parts
Removal of Stock PartsRemoval of Stock Parts
Removal of Stock Parts
２
２２
２－
－－
－１
１１
１ Front Bumper Removal
Front Bumper Removal Front Bumper Removal
Front Bumper Removal
(1) Disconnect the negative terminal of the battery.
If the car was recently shut off, please wait 3 minutes before disconnecting the battery.
(2) Remove the front, the inner, the left and the right inner
fender protectors.
(3) Remove the one-piece lip spoiler/ undercarriage cover.
※ Remove the rubber plugs to expose the bolts and screws.
※ Slide the one-piece lip spoiler/ undercarriage cover
forward (away from the car) to remove.
(4) Remove the radiator cover.
(5) Remove the front bumper/ fascia screws.
(6) Remove the wire connector from the turn signal lamp.
※Both sides have two screws.
―６―
(7) Remove the connector from the pedestrian impact sensor.
※ If the battery is reconnected while the pedestrian impact
sensor is disconnected, a popup hood warning light will
appear on your instrument panel.
(8) Remove the bumper/ fascia.
※ Be aware of the bumper fasteners, some adjustment
required to remove the bumper/ fascia.
２
２２
２－
－－
－２
２２
２
Air Intake Duct Removal
Air Intake Duct RemovalAir Intake Duct Removal
Air Intake Duct Removal
(1) Remove the engine oil cooler duct.
※ Allow the oil cooler to hang freely.
(2) Remove the left and right intake duct.
―７―
(3) Remove the impact foam.
(4) Remove the front bumper reinforcement.
(5) Disconnect the couplers.
(6) Remove the hood latch cable and cable fastener.
・・・Electrical Couplers
A/C Liquid Tank, Outside Temp. Sensor
Hood Latch, Horn
・・・Cable fastener
・・・Hood :Lock Cable Fastener
(7) Remove the front bumper retainer (upper side).
A/C Liquid Tank
Temp Sensor
Hood Latch
Horn
バンパーブラケット
取り付けボルト×４
※
Air duct mounting bolts are attached to the front bumper
reinforcement, please remove.
アーマチュア
取り付けボルト×８
―８―
(8) Remove the P/S Oil Cooler mounting bolts, and let the
cooler hang freely.
※ Removal of oil line is not necessary.
※ Be careful not to damage the oil cooler and A/C
condenser.
(9) Disconnect the windshield washer pump and washer liquid
level switch connectors. Remove the front Washer Tube
from the Pump.
Remove the washer liquid level switch fastener。
(10) Remove the washer tank.
(11) Intake Pipe Hose Removal
Intake Pipe Hose Removal Intake Pipe Hose Removal
Intake Pipe Hose Removal
Remove the pressure sensor coupler and the vacuum line
from the top of the recirculation valve. Then remove the
stock charge piping
Tube
Clip
Liquid Switch
Pump
―９―
(12) Remove the radiator air guide bolts. Once removed, uninstall the Intercooler(s) and radiator core support.
２
２２
２－
－－
－３
３３
３
Intercooler Removal
Intercooler RemovalIntercooler Removal
Intercooler Removal
(1) The arrows show the rivets that will need to be drilled out. Once the rivets are drilled out, please remove the
Intercooler Intake Duct.
(2) Separate the intercooler(s) from the radiator core support.
Remove the driver side (U.S.). Then remove completely. Make sure not
to hit or damage the oil cooler.
※Slightly move the radiator core sup
port frame. Once
moved, disconnect the Hood Latch Cable Fastener.
Andere Handbücher für Intercooler Kit
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere GReddy Autozubehör Handbücher
GReddy
GReddy Tuner Edition Turbo Kit Bedienungsanleitung
GReddy
GReddy BRS-503 Bedienungsanleitung
GReddy
GReddy TYPE-RS BRS-112 JZA80 Bedienungsanleitung
GReddy
GReddy Intercooler Kit Bedienungsanleitung
GReddy
GReddy Turbo Kit Bedienungsanleitung
GReddy
GReddy 12559101 Bedienungsanleitung
GReddy
GReddy Intercooler Kit Bedienungsanleitung
GReddy
GReddy Type-RS BRS-501 FC3S Bedienungsanleitung
GReddy
GReddy Supercharger Kit Bedienungsanleitung
GReddy
GReddy SW-20 Bedienungsanleitung
GReddy
GReddy Turbo Kit Bedienungsanleitung
GReddy
GReddy Intercooler Kit Bedienungsanleitung
GReddy
GReddy Turbo Kit Bedienungsanleitung
GReddy
GReddy AERO KIT Bedienungsanleitung
GReddy
GReddy Turbo Kit Bedienungsanleitung
GReddy
GReddy Turbo Kit Bedienungsanleitung
GReddy
GReddy 12519101 Bedienungsanleitung
GReddy
GReddy Intercooler Kit Bedienungsanleitung
GReddy
GReddy Profec Bedienungsanleitung
GReddy
GReddy INFO TOUCH Montageanleitung
