Guardian 01608 Bedienungsanleitung

Product Name: Chain Positioning Lanyard

Instruction Manual

Part #: 01608; 01610; 01616; 01617

Do not throw away these instructions!

Read and understand these instructions before using equipment!

Introduction 1

Applicable Safety Standards 1

Worker Classifications 1

Safety Information 6

Product Specific Applications 2

Limitations 2 - 3

Components and Specifications 3 - 4

Maintenance, Cleaning, and Storage 5

Inspection 5

Installation and Use 4

Inspection Log 5

Labels 7

Introduction

Thank you for purchasing a Guardian Fall Protection Chain Positioning Lanyard. This manual must be read and

understood in its entirety, and used as part of an employee training program as required by OSHA or any

applicable state agency.

This and any other included instructions must be made available to the user of the equipment. The user

must understand how to safely and effectively use the Chain Positioning Lanyard, and all fall safety equipment

used in combination with the Chain Positioning Lanyard.

User Information

Date of First Use:

Serial #:

Trainer:

User:

Applicable Safety Standards

When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926

Subpart M, OSHA 1910, ANSI Z359.3-2017 and ANSI A10.32-2012 standards for fall protection. Applicable

standards and regulations depend on the type of work being done, and also might include state regulations

if applicable. Consult regulatory agencies for more information on personal fall arrest systems and associated

components.

Worker Classifications

CAUTION

Understand the following definitions of those who

work near or who may be exposed to fall hazards.

Qualified Person: A person with an accredited degree or certification, and with extensive experience or

sufficient professional standing, who is considered proficient in planning and reviewing the conformity of fall

protection and rescue systems.

Competent Person: A highly trained and experienced person who is ASSIGNED BY THE EMPLOYER to be

responsible for all elements of a fall safety program, including, but not limited to, its regulation, management,

and application. A person who is proficient in identifying existing and predictable fall hazards, and who has

the authority to stop work in order to eliminate hazards.

Authorized Person: A person who is assigned by their employer to work around or be subject to potential or

existing fall hazards.

It is the responsibility of a Qualified or Competent person to supervise the job site and ensure all

applicable safety regulations are complied with.

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

Product Specific Applications

WARNING

Use of equipment in unintended applications may result in serious

injury or death. Maximum 1 attachment per connection point.

Chain Positioning Lanyards must be used for Work Positioning applications ONLY.

NEVER for use in Fall Arrest or any other fall protection applications.

Work Positioning: Chain Positioning Lanyard may be used in Work Positioning applications. Work

Positioning systems allow a worker to be supported while in suspension and work freely with both

hands. Structure must withstand loads applied in the directions permitted by the system of at least

3,000 lbs. Maximum allowable free fall is 2’. Applicable D-rings: Side.

Rebar hook at center of Chain Positioning Lanyard must ONLY be

connected to structural rebar or other compatible structural anchor point.

Chain Positioning Lanyard snap hooks must ONLY be connected to applicable harness D-rings.

Guardian Fall Protection recommends that a back-up fall protection system, suitable

for Fall Arrest applications, be used in conjunction with Chain Positioning Lanyards.

Worker capacity range (including all clothing, tools, and equipment):

ANSI 130-310 lbs., OSHA 100-420 lbs.

NEVER use Chain Positioning Lanyards for rigging equipment or as material hoists.

Limitations

Fall Clearance: There must be sufficient

clearance below the anchorage connector

to arrest a fall before the user strikes the

ground or an obstruction. When calculating

fall clearance, account for a MINIMUM 2’

safety factor, deceleration distance, user

height, length of lanyard/SRL, and all

other applicable factors.

Diagram shown is an example fall

clearance calculation ONLY.

Swing Falls: Prior to installation or use,

make considerations for eliminating or

minimizing all swing fall hazards. Swing

falls occur when the anchor is not

directly above the location where a fall

occurs. Always work as close to in line

with the anchor point as possible. Swing

falls significantly increase the likelihood

of serious injury or death in the event

of a fall.

Fall clearance calculation shown based on standing

worker falling directly in-line with anchor point.

Always consider potential swing fall and other

hazards when calculating fall clearance.

*Eliminate Swing Fall whenever

possible! If Swing Fall exists,

always account for additional

fall clearance.

2’

Rebar

Positioning

Device

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

Materials:

Chain: galvanized steel

Web: polyester and nylon

Connectors : galvanized steel.

Part # Length Description

01616

01617

24”

Swivel Rebar Hook & Clevis Pin Snap Hooks

Rebar Hook & Clevis Pin Snap Hooks

Compatibility: When making connections with Chain Positioning Lanyard, eliminate all possibility of roll-out.

Roll-out occurs when interference between a hook and the attachment point causes the hook gate to

unintentionally open and release. All connections must be selected and deemed compatible with Rebar

Positioning Device by a Competent Person. All connector gates must be self-closing and self-locking, and

withstand minimum loads of 3,600 lbs. See the following for examples of compatible/incompatible

connections:

Components and Specifications

Quick Link

Carabiners

Snap HooksRebar Hook

Connector

closed and

locked to

D-ring. OK.

Connector

to integral

lanyard.

NO.

Two or more

snap hooks or

carabiners

connected to

each other. NO.

Two connectors

to same

D-ring. NO.

Connector

directly to

horizontal

lifeline. NO.

Connector

directly to

webbing.

NO.

Incompatible

or irregular

application,

which may

increase risk

of roll-out. NO.

01608 26” Swivel Rebar Hook & Snap Hooks (Grade 80 Chain)

01610 24” Web Assembly w/Rebar Hook & Snap Hooks

Installation and Use

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

Guardian Fall Protection recommends that a back-up fall protection

system, functional in Fall Arrest applications, be used in conjunction

with all Chain Positioning Lanyards. Competent Person must make

final determination regarding use of back-up fall protection system.

WARNING

1. Connect back-up fall protection system, deemed compatible by a Competent Person, to harness dorsal

D-ring. Follow all manufacturer’s instructions for all components of back-up system. Ensure sufficient fall

clearance exists at all work areas, and that all applicable safety regulations are followed at all times.

Quick Link Carabiners must only be used to connect Rebar Positioning

Device chain links for purposes of adjusting length of chain.

Both Chain Legs must always be adjusted to same length.

NEVER make any connections to Quick Link Carabiners.

WARNING

Rebar Hook fully

closed and

locked around

structural rebar.

3. Connect Rebar Hook to structural rebar; ensure hook fully closes and locks around rebar. If climbing, ensure

that 100% tie-off is maintained at all times.

2. If applicable/necessary, adjust length of Chain Legs by using Quick Link Carabiners to connect chain links.

NEVER cross-connect Chain Legs. Then, connect Chain Positioning Lanyard Snap Hooks to harness side D-rings OR

harness shoulder D-rings. Ensure Snap Hooks fully close and lock around D-rings. MAXIMUM 1 connection per

D-ring.

01617

01616

01608 01610

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

Maintenance, Cleaning, and Storage

If Chain Positioning Lanyard fails inspection in any way, immediately remove it from service, and contact

Guardian to inquire about its return or repair.

Cleaning after use is important for maintaining the safety and longevity of Chain Positioning Lanyard. Remove

all dirt, corrosives, and contaminants from Chain Positioning Lanyard before and after each use. If a Rebar

Positioning Device cannot be cleaned with plain water, use mild soap and water, then rinse and wipe dry.

NEVER clean Chain Positioning Lanyard with corrosive substances.

When not in use, store equipment where it will not be affected by heat, light, excessive moisture, chemicals,

or other degrading elements.

Prior to EACH use, inspect Chain Positioning Lanyard for deficiencies, including, but not limited to, corrosion,

deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating,

alteration, broken stitching, fraying, and missing or illegible labels. IMMEDIATELY remove Rebar Positioning

Device from service if defects or damage are found, or if exposed to forces of fall arrest.

Ensure that applicable work area is free of all damage, including, but not limited to, debris, rot, rust, decay,

cracking, and hazardous materials. Ensure that selected work area will support the application-specific

minimum loads set forth in this instruction manual. Work area MUST be stable.

At least every 12 months, a Competent Person other than the user must inspect Chain Positioning Lanyard.

Competent Person inspections MUST be recorded in inspection log in instruction manual and on

equipment inspection grid label. The Competent Person must sign their initials in the box

corresponding to the month and year the inspection took place.

During inspection, consider all applications and hazards Chain Positioning Lanyard has been subjected to.

Inspect bolt and nut at base of hook:

Remove from service if there is a

visible gap between nut and hook.

Inspection

Inspection Log

If equipment fails inspection

IMMEDIATELY REMOVE FROM SERVICE.

Date of First Use: __________________.

Product lifetime is indefinite, provided

it passes all pre-use and Competent

Person inspections. User must inspect

prior to EACH use. Competent Person

other than user must complete formal

inspection at least every 12 months.

Competent Person to inspect and initial.

This inspection log must be specific to

one Chain Positioning Lanyard. Separate

inspection logs must be used for each

Chain Positioning Lanyard. All inspection

records must be made visible and

available to all users at all times.

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

Safety Information

Failure to understand and comply with safety regulations may result in

serious injury or death. Regulations included herein are not all-inclusive,

are for reference only, and are not intended to replace a Competent

Person’s judgment or knowledge of federal or state standards.

WARNING

Do not alter equipment. Do not misuse equipment.

Workplace conditions, including, but not limited to, flame, corrosive chemicals, electrical shock, sharp objects,

machinery, abrasive substances, weather conditions, and uneven surfaces, must be assessed by a Competent

Person before fall protection equipment is selected.

The analysis of the workplace must anticipate where workers will be performing their duties, the routes they

will take to reach their work, and the potential and existing fall hazards they may be exposed to. Fall

protection equipment must be chosen by a Competent Person. Selections must account for all potential

hazardous workplace conditions. All fall protection equipment should be purchased new and in an unused

condition.

Fall protection systems must be selected and installed under the supervision of a Competent Person, and used

in a compliant manner. Fall protection systems must be designed in a manner compliant with all federal, state,

and safety regulations. Forces applied to anchors must be calculated by a Competent Person.

Unless explicitly stated otherwise, the maximum allowable free fall distance for lanyards must not exceed 6’.

No free fall allowed for non-LE SRLs. Class A SRLs must arrest falls within 24”; Class B SRLs must arrest falls

within 54”.

Harnesses and connectors selected must be compliant with manufacturer’s instructions, and must be of

compatible size and configuration. Snap hooks, carabiners, and other connectors must be selected and applied

in a compatible fashion. All risk of disengagement must be eliminated. All snap hooks and carabiners must be

self-locking and self-closing, and must never be connected to each other.

A pre-planned rescue procedure in the case of a fall is required. The rescue plan must be project-specific. The

rescue plan must allow for employees to rescue themselves, or provide an alternative means for their prompt

rescue. Store rescue equipment in an easily accessible and clearly marked area.

Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment

must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize

the likelihood of fall hazards, and the correct use of personal fall arrest systems.

NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless

explicitly certified for such use.

Equipment subjected to forces of fall arrest must immediately be removed from use.

Age, fitness, and health conditions can seriously affect the worker should a fall occur. Consult a doctor if there

is any reason to doubt a user’s ability to withstand and safely absorb fall arrest forces or perform set-up of

equipment. Pregnant women and minors must not use this equipment.

Physical harm may still occur even if fall safety equipment functions correctly. Sustained post-fall suspension

may result in serious injury or death. Use trauma relief straps to reduce the effects of suspension trauma.

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 USA phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

785034 (Rev. M)

Labels

Rebar Positioning Device

Prior to use, read and understand all manufacturer’s instructions.

For Work Positioning applications ONLY. MAXIMUM free fall 2’.

90143 (Rev. F)

Date of Manufacture:

Weight capacity range (including equipment): 130-310 lbs.

Material: Grade 80, galvanized steel chain.

Avoid contact with sharp and abrasive edges and surfaces.

ANSI Z359.3-17 & A10.32-12 / OSHA 1910 & 1926 Subpart M.

Part #: 01608 (26”)

Guardian Fall Protection • 1-800-466-6385 • www.guardianfall.com

Serial #:

Immediately remove from service if exposed to forces of a fall.

Only make compatible connections. See instructions.

Rebar Positioning Device

Prior to use, read and understand all manufacturer’s instructions.

For Work Positioning applications ONLY. MAXIMUM free fall 2’.

90145 (Rev. G)

Date of Manufacture:

Weight capacity range (including equipment): 130-310 lbs.

Material: polyester and nylon.

Avoid contact with sharp and abrasive edges and surfaces.

ANSI Z359.3-17 & A10.32-12 / OSHA 1910 & 1926 Subpart M.

Part #: 01610 (24”)

Guardian Fall Protection • 1-800-466-6385 • www.guardianfall.com

Serial #:

Immediately remove from service if exposed to forces of a fall.

Chain Positioning Lanyard

Prior to use, read and understand all manufacturer’s instructions.

For Work Positioning applications ONLY. MAXIMUM Free Fall 2’.

91390 (Rev. A)

Date of

Manufacture:

Weight Capacity: (incl. equipment): ANSI -130-310 lbs., OSHA 100-420 lbs.

Material: Galvanized Steel

Avoid contact with sharp and abrasive edges and surfaces.

ANSI Z359.3-17 & A10.32-12 / OSHA 1910 & 1926 Subpart M.

Part #: 01616

Guardian Fall Protection • 1-800-466-6385 • www.guardianfall.com

Serial #:

Immediately remove from service if exposed to forces of a fall.

Only make compatible connections. See instructions.

Chain Positioning Lanyard

Prior to use, read and understand all manufacturer’s instructions.

For Work Positioning applications ONLY. MAXIMUM Free Fall 2’.

91391 (Rev. A)

Date of

Manufacture:

Weight Capacity: (incl. equipment): ANSI -130-310 lbs., OSHA 100-420 lbs.

Material: Galvanized Steel

Avoid contact with sharp and abrasive edges and surfaces.

ANSI Z359.3-17 & A10.32-12 / OSHA 1910 & 1926 Subpart M.

Part #: 01617

Guardian Fall Protection • 1-800-466-6385 • www.guardianfall.com

Serial #:

Immediately remove from service if exposed to forces of a fall.

Only make compatible connections. See instructions.

DO NOT

REMOVE LABELS!

USER MUST INSPECT

PRIOR TO EACH USE.

Competent Person to

inspect and initial

at least every

12 months.

Date of First Use:

J F M A M JJ A S O N D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Guardian Sicherheitsausrüstung Handbücher

Guardian

Guardian PitchPro Bedienungsanleitung

Guardian

Guardian DIABLO 10967 Bedienungsanleitung

Guardian

Guardian 36030 Bedienungsanleitung

Guardian

Guardian G-Rail Bedienungsanleitung

Guardian

Guardian B7-COMFORT Bedienungsanleitung

Guardian

Guardian 42102 Bedienungsanleitung

Guardian

Guardian Halo Big Block SRL Bedienungsanleitung

Guardian

Guardian EyeSafe G1100 Montage- und Bedienungsanleitung

Guardian

Guardian 10920 Bedienungsanleitung

Guardian

Guardian 10785 Bedienungsanleitung

Guardian

Guardian SkyMast 00271 Bedienungsanleitung

Guardian

Guardian 15220 Bedienungsanleitung

Guardian

Guardian FABXR Bedienungsanleitung

Guardian

Guardian EXPOSURE LAS Bedienungsanleitung

Guardian

Guardian 42115 Bedienungsanleitung

Guardian

Guardian 00230 Bedienungsanleitung

Guardian

Guardian FABX Bedienungsanleitung

Guardian

Guardian XPLORER Bedienungsanleitung

Guardian

Guardian Halo Big Block SRL Bedienungsanleitung

Guardian

Guardian 00260 Bedienungsanleitung

Guardian

Guardian C7 Bedienungsanleitung

Guardian

Guardian Diablo SRL-LE Bedienungsanleitung

Guardian

Guardian 10910 Bedienungsanleitung

Guardian

Guardian 42113 Bedienungsanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

Honeywell

Honeywell Miller H-Design DuraFlex Bedienerhandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung