Hach LZV902 Bedienungsanleitung

DOC012.97.90371

LZV902

DR 6000

03/2012, Edition 1

User Manual en

Manual del usuario es

Manuel d'utilisation fr

ユーザーマニュアル ja

사용 설명서 ko

Manual do utilizador pt

用户手册 zh

English .............................................................................................................................................. 3

Español ............................................................................................................................................. 9

Français .......................................................................................................................................... 17

英語 ................................................................................................................................................. 25

한국어 ............................................................................................................................................. 33

Português ....................................................................................................................................... 41

英语 ................................................................................................................................................. 49

English 3

English

General information

Safety notes

Read the entire user manual carefully before you unpack, set up or

operate the device. Observe all danger and warning notes. Failure to do

so could lead to serious injury of the operator or to damage to the

device.

To make sure that the device safety features are not impaired, this

device may not be used or installed in any manner other than that

specified in this user manual.

Danger notes in this manual

Note: Information that supplements aspects from the main text.

Warning labels

Read all labels and tags attached to the device. Failure to do so may

result in personal injury or damage to the device. For symbols attached

to the instrument, corresponding warning notes are provided in the user

manual.

DANGER

Indicates a potentially or imminently hazardous situation that, if not avoided, can

result in death or serious injury.

WARNING

Indicates a potentially or imminently hazardous situation that, if not avoided, may

result in death or serious injury.

CAUTION

Indicates a possible dangerous situation that can have minor or moderate injuries

as a result.

NOTICE

Indicates a situation that, if not avoided, could result in damage to the device.

Information that particularly should be emphasized.

This symbol may be attached to the device, and references the

operation and/or safety information in the user manual.

Electrical equipment marked with this symbol may as of August 12,

2005 Europe-wide no longer be disposed of in unsorted house or

industrial waste. According to valid provisions (EU Directive 2002/96/

EC), from this point consumers in the EU must return old electrical

devices to the manufacturer for disposal. This is free for the

consumer.

Note: Contact the manufacturer or supplier to find out you

can return end-of-life devices, manufacturer-supplied

electrical accessories and all auxiliary items for proper

disposal.

English 4

Chemical and biological safety

Normal operation of this instrument may involve the use of hazardous

chemicals or biologically harmful samples.

•Observe all cautionary information printed on the original solution

containers and safety data sheet prior to their use.

•Dispose of all consumed solutions in accordance with national

regulations and laws.

•Select the type of protective equipment suitable to the concentration

and quantity of the dangerous material at the respective work place.

Overview of product

The carousel insert (sample changer) is available in two designs:

•The 10 mm carousel insert (sample changer) can be equipped with

up to seven 10 mm square cells.

•The 1 inch carousel insert (sample changer) can be equipped with

up to five 1 inch square cells.

Various combinations of sample and blank value cells are possible.

These combinations are defined with the corresponding carousel options

before measuring.

Installation

Insert the carousel insert (sample changer)

1. Open the cell compartment.

2. Remove the universal cell adapter.

3. Insert the carousel insert (sample changer) so that the arrow on the

insert points left in the direction of the round cell compartment.

4. Press the carousel insert down until it snaps into place.

Figure 1 Insert the carousel insert

DANGER

Potential danger in the event of contact with chemical/biological materials.

Handling chemical samples, standards and reagents can be dangerous.

Familiarise yourself with the necessary safety procedures and the correct

handling of the chemicals before the work and read and follow all relevant safety

data sheets.

English 5

Operation

Measurements with the carousel insert

Stored programs

1. Select Stored Programs in the main menu.

2. Select the desired test and press Start.

3. Press Options > More > Reading mode.

4. Select Carousel 1 inch square.

5. In the toolbar, select the symbol for the carousel insert. This symbol

opens a window with carousel options; refer to Table 1.

6. Equip the first carousel insert with zero solution and samples, as

per the cell order information. The zero solution is placed in

position 1.

Table 1 "Stored Programs" carousel options

Options Description

Number of samples Number of samples without zero solution (or blank

value), maximum 40 samples possible.

Sample ID

Off: The samples are not assigned a sample ID

Enter Sample ID: The sample is selected and a sample

is entered under Edit. The sample IDs are not saved in

the general sample ID list, rather they only apply to the

current series of measurements.

Select Sample ID: The sample is selected and the

general sample ID list opens under Select. Each

sample is allocated the desired sample ID.

Import external Sample ID list: *.txt and *.csv files can

be imported via a USB stick or network; refer to section

Import an external sample ID.

Cell Order Information

Cell sequence indicator: shows the position in the

carousel insert in which each sample must be placed.

Z1 is the zero solution (blank value). Defined sample

IDs are specified here and make assigning the samples

easier.

Dilution Factor Each sample can be assigned a dilution factor.

Table 1 "Stored Programs" carousel options

Options Description

English 6

7. Start the measurement by pressing Read Carousel 1.

The first carousel insert is measured and the results displayed.

8. Remove the carousel insert or cells and load carousel insert 2 with

samples.

9. Start the measurement by pressing Read Carousel 2.

The second carousel insert is measured and the results displayed.

Continue until all samples have been measured.

Note: If Instrument Setup > Data Log Setup > Auto Store: On has

been selected, all measurement data is automatically saved. The

measurement data can be accessed under Recall data > Data Log.

Import an external sample ID

1. Create an external sample ID list with a spreadsheet program.

Four columns are permitted; column 1 contains the sequential

number, column 2 the sample designation, columns 3 and 4 are

optional.

Headings and comment lines must begin with #.

2. Create a folder named "SampleID" on a USB stick or in your

established network.

3. Save the sample ID list in CSV or UNICODE-TXT format in the

"SampleID" folder with Save as.

4. Connect the DR6000 to the USB stick or network.

All *.TXT and *.CSV files in the SampleID folder will be displayed for

selection.

5. Select the desired file with OK.

6. Transfer the displayed sample ID list with Done.

Single wavelength

1. Press Single Wavelength in the main menu.

2. Press Options > More > Reading mode.

3. Select Carousel 1 inch square or Carousel 10 mm square.

4. In the toolbar, select the symbol for the carousel insert. This symbol

opens a window with carousel options; refer to Table 2.

Table 2 Carousel options

Options

Carousel 1 inch

square

Options

Carousel 10 mm

square Description

Zero 1 Read 1–5 Zero 1 Read 1–7

Position 1 zero solution, from position 1 to

5 (or 7) samples

Measurement stops after the zero

measurement. Afterwards, the carousel

insert is measured one a work step.

Zero 1–5

Read 1–5 Zero 1–7

Read 1–7

Position 1 to 5 (or 7) zero solutions,

position 1 to 5 (or 7) samples.

Measurement stops after all zero

measurements. Afterwards, the samples

are measured in a further work step.

Zero 1 Read 2–5 Zero 1 Read 2–7

Position 1 zero solution, from position 2 to

5 (or 7) samples.

Carousel insert is measured in one work

step.

Zero 1, 3

Read 2, 4 Zero 1, 3, 5

Always alternating. First zero solution,

then sample.

Carousel insert is measured in one work

step.

English 7

5. Load the carousel insert according to the selected carousel option.

6. Start the measurement by pressing Zero or Read or Zero & Read

according to the selected carousel option.

The carousel insert is measured and the results are displayed.

Note: If Instrument Setup > Data Log Setup > Auto Store: On has

been selected, all measurement data is automatically saved. The

measurement data can be accessed under Recall data > Data Log.

Multi-wavelength

1. Press Multi-Wavelength in the main menu.

2. Press Options > More > Reading mode.

3. Select Carousel 1 inch square or Carousel 10 mm square.

4. In the toolbar, select the symbol for the carousel insert. This symbol

opens a window with carousel options; refer to Table 2.

5. Load the carousel insert according to the selected carousel option.

6. Start the measurement by pressing Zero or Read or Zero & Read

according to the selected carousel option.

Each zero solution and sample is measured with the defined

wavelength and the results are displayed.

Note: If Instrument Setup > Data Log Setup > Auto Store: On has

been selected, all measurement data is automatically saved. The

measurement data can be accessed under Recall data > Data Log.

Wavelength scan

1. Press Wavelength Scan in the main menu.

2. Press Options > More > Reading mode.

3. Select Carousel 1 inch square or Carousel 10 mm square.

4. In the toolbar, select the symbol for the carousel insert. This symbol

opens a window with carousel options; refer to Table 2.

5. Load the carousel insert according to the selected carousel option.

6. Start the measurement by pressing Zero or Read or Zero & Read

according to the selected carousel option.

Each zero solution and sample is measured with the defined

wavelength range; the curve is displayed.

Save the wavelength scan

1. Press Options > Select View and select the cell for which you

want to save the scan.

2. Select Table or Graph; the scan is displayed.

3. Press Options > Store Symbol and select one of the 20 scan

storage locations.

4. Press Store.

5. The measurement data can be accessed in the main menu under

Recall Data > Wavelength Scan.

English 8

Time course

1. Press the Time Course menu option in the main menu.

2. Press Options > More > Reading mode.

3. Select Carousel 1 inch square or Carousel 10 mm square.

4. In the toolbar, select the symbol for the carousel insert. This symbol

opens a window with carousel options; refer to Table 2.

5. Load the carousel insert according to the selected carousel option.

6. The measurement interval between the individual measurements

must be at least 15 seconds.

7. Start the measurement by pressing Zero or Read or Zero & Read

according to the selected carousel option.

Each zero solution and sample is measured in the defined

measurement interval and the curve is displayed.

Storing the time course

1. Press Options > Select View and select the cell for which you

want to store the elapsed time.

2. Select Table or Graph; the elapsed time is displayed.

3. Press Options > Store Symbol and select one of the 20 cycle

storage locations.

4. Press Store.

5. The measurement data can be accessed in the main menu under

Recall Data > Time Course.

Accessories

Description Order no.

Carousel insert (sample changer) 10 mm LZV902.99.00002

Carousel insert (sample changer) 1 inch LZV902.99.00012

1-inch square cells, 8 matched cells, glass (10 mL) 2495408

10 mm square cells, matched pair, glass (3.5 mL) 2095100

10 mm square cells, quartz 2624410

10 mm disposable square micro cells (1.5 mL) 2629500

10 mm square plastic cells 2743400

Plug, neoprene for 1-inch square cells 1480801

Español 9

Español

Información general

Notas de seguridad

Lea detenidamente el manual del usuario en su totalidad, antes de

retirar el dispositivo del paquete, de configurarlo o hacerlo funcionar.

Respete todas las notas de peligro y advertencia. En caso de no

hacerlo, el usuario puede sufrir lesiones graves o el dispositivo puede

resultar dañado.

A fin de prevenir el deterioro de las funciones de seguridad, este

dispositivo no puede utilizarse ni instalarse de manera diferente a la que

se especifica en este manual.

Notas de peligro en este manual

Nota: Información que complementa algunos aspectos del texto

principal.

Etiquetas de advertencia

Lea todas las etiquetas y rótulos adosados al dispositivo. De lo

contrario, se pueden provocar heridas personales o daños en el

dispositivo. En relación con los símbolos adosados al dispositivo, se

proporcionan las notas de advertencia correspondientes en el manual

del usuario.

PELIGRO

Indica una situación de peligro inminente o potencial, que de no evitarse, podría

causar la muerte o lesiones graves.

ADVERTENCIA

Señala una situación de peligro inminente o potencial, que de no evitarse, podría

causar lesiones graves y la muerte.

ATENCIÓN

Indica una situación de peligro potencial que puede ocasionar lesiones leves o

moderadas.

AVISO

Indica una situación que de no evitarse, podría causar daños al dispositivo.

Información en la que se debería hacer especial hincapié.

Es posible que este símbolo esté adosado al dispositivo y haga

referencia al funcionamiento y a la información de seguridad que

figura en este manual.

El equipo eléctrico marcado con este símbolo no se podrá desechar

como residuo industrial o doméstico no clasificado en toda Europa

después del 12 de agosto de 2005. De conformidad con las

disposiciones válidas (directiva UE 2002/96/CE), los usuarios en

Europa deben retornar ahora los equipos eléctricos antiguos al

fabricante para su eliminación. Esto es gratis para el consumidor.

Nota: Comuníquese con el fabricante o proveedor para

obtener información sobre la eliminación adecuada de

dispositivos fuera de uso, accesorios eléctricos

suministrados por el fabricante y cualquier otro elemento

auxiliar.

Español 10

Seguridad química y biológica

El funcionamiento normal de este instrumento puede implicar el uso de

muestras nocivas químicas y biológicas.

•Observe toda la información de seguridad impresa en los

contenedores originales de las soluciones y hojas de datos de

seguridad antes de utilizarlos.

•Deshágase de todas las soluciones que haya utilizado de acuerdo

con las normativas y leyes nacionales.

•Seleccione el tipo de equipo de protección adecuado a la

concentración y la cantidad de material peligroso en el lugar de

trabajo correspondiente.

Información general del producto

La inserción de carrusel (cambiador de muestra) está disponible en dos

diseños:

•La inserción de carrusel (cambiador de muestra) de 10 mm puede

contener hasta siete cubetas cuadradas de 10 mm.

•La inserción de carrusel (cambiador de muestra) de 1 pulgada

puede contener hasta cinco cubetas cuadradas de 1 pulgada.

Es posible que existan varias combinaciones entre cubetas de valor en

blanco y de muestra. Estas combinaciones se definen mediante las

opciones de carrusel correspondientes antes de realizar las medidas.

Instalación

Inserte la inserción de carrusel (cambiador de

muestra)

1. Abra el compartimiento de la cubeta.

2. Quite el adaptador de cubetas universal.

3. Inserte la inserción de carrusel (cambiador de muestra) de modo

que la flecha en la inserción apunte hacia la izquierda en dirección

al compartimiento redondeado de la cubeta.

4. Presione la inserción de carrusel hasta encaje en su lugar.

Figura 1 Inserte la inserción de carrusel

PELIGRO

Peligro potencial en caso de contacto con materiales químicos o biológicos.

La manipulación de muestras químicas, patrones y reactivos puede ser peligrosa.

Familiarícese con los procedimientos de seguridad necesarios y el manejo

correcto de los productos químicos antes de realizar cualquier trabajo y lea las

hojas de datos de seguridad correspondientes y siga las indicaciones.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hach Laborausrüstung Handbücher

Hach

Hach Debubb Bedienungsanleitung

Hach

Hach AS950 AWRS Bedienungsanleitung

Hach

Hach HQ440d Kurzanleitung

Hach

Hach BODTrak Bedienungsanleitung

Hach

Hach sension ph31 Bedienungsanleitung

Hach

Hach SD900 Kurzanleitung

Hach

Hach LS 120 Bedienungsanleitung

Hach

Hach TenSette plus Kurzanleitung

Hach

Hach DR 5000 Bedienungsanleitung

Hach

Hach ISECL181 Bedienungsanleitung

Hach

Hach TitraLab AT1000 Series Kurzanleitung

Hach

Hach sensION MM340 Bedienungsanleitung

Hach

Hach BODTrak II Bedienungsanleitung

Hach

Hach PHC281 Bedienungsanleitung

Hach

Hach Lange 2100AN Bedienungsanleitung

Hach

Hach TitraLab Total Hardness Kurzanleitung

Hach

Hach QuikChem 8500 2 Series Bedienungsanleitung

Hach

Hach TitraLab Bedienungsanleitung

Hach

Hach sensIONTM+ pH31 Bedienungsanleitung

Hach

Hach LT 200 Bedienungsanleitung

Hach

Hach sensION+ MM374 Bedienungsanleitung

Hach

Hach PHC705 Bedienungsanleitung

Hach

Hach QbD1200 AutoSampler Bedienungsanleitung

Hach

Hach MET ONE 3400 Series Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung