Hach LT 200 Bedienungsanleitung

DOC022.98.80188

LT 200 / DRB 200

03/2021, Edition 4

User Manual

Benutzerhandbuch

Manuale utente

Manuel de l'utilisateur

User Manual

Manual do utilizador

Návod k použití

Brugervejledning

Gebruikershandleiding

Instrukcja obsługi

Bruksanvisning

Käyttöopas

Ръководство за потребителя

Felhasználói kézikönyv

Manual de utilizare

Naudotojo vadovas

Руководство пользователя

Kullanıcı Kılavuzu

Návod na použitie

Navodila za uporabo

Korisnički priručnik

Εγχειρίδιο χρήστη

Kasutusjuhend

Priručnik za korisnika

Table of Contents

English...................................................................................................................................................................................................4

Deutsch...............................................................................................................................................................................................14

Italiano................................................................................................................................................................................................. 25

Français.............................................................................................................................................................................................. 36

Português.......................................................................................................................................................................................... 58

Čeština................................................................................................................................................................................................ 69

Dansk...................................................................................................................................................................................................79

Nederlands........................................................................................................................................................................................ 89

Polski................................................................................................................................................................................................. 100

Svenska............................................................................................................................................................................................ 111

Suomi.................................................................................................................................................................................................121

български....................................................................................................................................................................................... 131

Magyar.............................................................................................................................................................................................. 142

Română............................................................................................................................................................................................ 152

lietuvių kalba...................................................................................................................................................................................163

Русский............................................................................................................................................................................................ 174

Türkçe................................................................................................................................................................................................185

Slovenský jazyk............................................................................................................................................................................ 195

Slovenski.......................................................................................................................................................................................... 205

Hrvatski............................................................................................................................................................................................. 215

Ελληνικά........................................................................................................................................................................................... 226

eesti keel.......................................................................................................................................................................................... 237

Српски.............................................................................................................................................................................................. 247

Table of Contents

1 Specifications on page 4

2 General information

on page 4

3 Installation on page 6

4 User interface and navigation

on page 8

5 Startup on page 9

6 Operation on page 10

7 Maintenance on page 12

8 Troubleshooting on page 13

9 Replacement parts and

accessories on page 13

Section 1 Specifications

Specifications are subject to change without notice.

Specification Details

Dimensions 25 x 14.5 x 31 cm (9.8 x 5.7 x 12.2 in.)

Weight Single heating block: 2 kg (4.4 lb)

Dual heating block: 2.8 kg (6.17 lb)

Power requirements 100–240 V, +5%/–15%, 50/60 Hz, Protection

Class I

Power input Single heating block: 115 V: 300 VA; 230 V:

450 VA

Dual heating block: 115 V: 600 VA; 230 V:

900 VA

Storage temperature –40 to +60 °C (–40 to +140 °F)

Operating temperature 10 to 45 °C (50 to 113 °F)

Operating humidity 90% (non-condensing)

Temperature range LT 200: 37 to 150 °C (98.6 to 302 °F)

DRB 200: 37 to 165 °C (98.6 to 329 °F)

Timer: 0 to 480 minutes

Specification Details

Temperature stability LT 200: ± 1 °C (± 2 °F)

DRB 200: ± 2 °C (± 3.5 °F)

Heating rate LT 200: From 20 to 148 °C (68 to 298 °F) in

10 min (to DIN 38409-44)

DRB 200: From 20 to 150 °C (68 to 302 °F) in

10 minutes

Certification CE and cTUVus

Section 2 General information

In no event will the manufacturer be liable for direct, indirect, special,

incidental or consequential damages resulting from any defect or

omission in this manual. The manufacturer reserves the right to make

changes in this manual and the products it describes at any time, without

notice or obligation. Revised editions are found on the manufacturer’s

website.

2.1 Safety information

NOTICE

The manufacturer is not responsible for any damages due to

misapplication or misuse of this product including, without limitation,

direct, incidental and consequential damages, and disclaims such

damages to the full extent permitted under applicable law. The user is

solely responsible to identify critical application risks and install

appropriate mechanisms to protect processes during a possible

equipment malfunction.

Please read this entire manual before unpacking, setting up or operating

this equipment. Pay attention to all danger and caution statements.

Failure to do so could result in serious injury to the operator or damage

to the equipment.

Make sure that the protection provided by this equipment is not impaired.

Do not use or install this equipment in any manner other than that

specified in this manual.

4 English

2.1.1 Use of hazard information

DANGER

Indicates a potentially or imminently hazardous situation which, if not

avoided, will result in death or serious injury.

W A R N I N G

Indicates a potentially or imminently hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation that may result in minor or

moderate injury.

NOTICE

Indicates a situation which, if not avoided, may cause damage to the

instrument. Information that requires special emphasis.

2.1.2 Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or

damage to the instrument could occur if not observed. A symbol, if noted

on the instrument, will be included with a danger or caution statement in

the manual.

This symbol, if noted on the instrument, references the

instruction manual for operation and/or safety information.

Electrical equipment marked with this symbol may not be

disposed of in European domestic or public disposal

systems. Return old or end-of-life equipment to the

manufacturer for disposal at no charge to the user.

This symbol indicates that the marked item can be hot and

should not be touched without care.

This symbol indicates that the marked item requires a

protective earth connection. If the instrument is not supplied

with a ground plug on a cord, make the protective earth

connection to the protective conductor terminal.

2.2 Product overview

This instrument has one or two heating blocks that increase the

temperature of solutions in round sample cells to a specified temperature

for a specified time period (Figure 1).

The LT 200 has three stored temperature programs and six temperature

programs that are configured by the user and saved. The DRB 200 has

six stored temperature programs and three temperature programs that

are configured by the user and saved.

English 5

Figure 1 Front view

1 Protective cover 3 Display 5 Left heating block

2 Right heating

block

4 Keys

Section 3 Installation

3.1 Install the protective covers

W A R N I N G

Shock and Burn Hazard. The protective cover must be

installed to prevent personal injury. The protective cover

prevents burns and power cord contact with the heating

block.

Refer to the illustrated steps that follow.

6 English

1 2

English 7

Section 4 User interface and navigation

4.1 User interface

The instrument is operated using three keys that are located below the

display (Figure 2). The function of each key is shown on the display. If

no function is shown for a key, that key is not currently active.

Figure 2 Keypad description

1 Display 3 Middle key

2 Right key 4 Left key

4.2 Display description

Figure 3 Screen display when a program is active on the left

heating block only

1 Thermometer symbol 5 Left heating block

2 Temperature of heating block 6 Remaining time

3 Right heating block 7 Timer symbol

4 Down arrow key (use to select

program)

8 English

Table 1 Thermometer symbols

Symbol Description

The heating block is increasing in

temperature.

The heating block is at the

selected temperature.

The heating block is decreasing in

temperature.

Section 5 Startup

5.1 Turn the instrument on

NOTICE

Do not turn the instrument off and on quickly as this can damage the

instrument. Always wait about 20 seconds before turning the

instrument on again.

1. Put the instrument on a stable, level, heat-resistant surface.

2. Connect the power cord to the power plug on the back of the

instrument.

3. Connect the power cord to a power socket with earthing contact.

4. Push the power switch on the back of the instrument to turn the

instrument on.

The first time the instrument is turned on, the language selection

screen is shown. Refer to Select the language on page 9.

5.2 Select the language

1. Hold down the left key and turn the instrument on.

2. Push the right arrow key to scroll through the menu. The display

goes back to the start of the menu at the end of the menu.

3. When the correct language is shown, push the key for the language.

Refer to Table 2.

Table 2 Language settings

Setting Language Setting Language

GB English E Spanish

D German NL Dutch

F French S Swedish

I Italian PL Polish

5.3 Set the display contrast

1. Hold down the middle key and turn the instrument on.

2. Push or hold down the up and down arrow keys to change the

contrast value.

3. Push OK to save the change.

English 9

Section 6 Operation

DANGER

Chemical exposure hazard. Obey laboratory safety

procedures and wear all of the personal protective equipment

appropriate to the chemicals that are handled. Refer to the

current safety data sheets (MSDS/SDS) for safety protocols.

6.1 Routine operation

CAUTION

Burn Hazard. Do not put a finger in an opening in the heating

block. Close the protective cover before increasing the

temperature of the heating block, and always keep the

protective cover closed during operation.

CAUTION

Burn Hazard. Sample cells are hot. Wear thermal insulating

material (e.g., gloves or finger cots). Do not remove a sample

cell that is greater than 80 °C. Do not put a sample cell that is

greater than 80 °C in a colorimeter.

CAUTION

Chemical Hazard. If a sample cell breaks, do not let the liquid

touch skin. Use a fume hood as necessary to remove

chemical fumes.

CAUTION

Chemical exposure hazard. Dispose of chemicals and wastes

in accordance with local, regional and national regulations.

NOTICE

To prevent sample cell and instrument damage, keep the openings in

the heating block dry. Dry the outside of sample cells fully.

NOTICE

To prevent instrument damage, immediately disconnect power if an

accidental spill occurs or a sample cell breaks, then clean the

instrument. Refer to Clean the instrument on page 12.

NOTICE

Do not cover the ventilation slits in the protective cover. The instrument

and sample cells may become too hot and decrease the accuracy of

measurement.

1. Prepare the test sample cells as specified in the analysis procedure.

2. Close the sample cells with the cap.

3. Dry the outside of the sample cells fully.

4. Turn the instrument on and open the protective cover. The last

temperature program(s) selected is shown on the display.

5. If using 16 mm tubes with a heating block with 20 mm openings, put

reducing adapters in the openings.

6. LT 200: Put the test sample cells in the correct heating block and

close the protective cover.

7. Select the correct temperature program (and digestion period if

applicable) using the keys, then push Start. Refer to Stored

programs on page 11. The temperature program is selected

independently for each heating block when there are two heating

blocks.

Note: To stop a program, push the key below the program two times.

LT 200: The digestion program starts. The temperature of the

heating block increases to the selected temperature, then the time

automatically counts down to zero (0). When the digestion program

is completed, three beeps are heard and the heater turns off.

DRB 200: The temperature of the heating block increases to the

selected temperature.

8. DRB 200: When the heating block is at the selected temperature

(two beeps are heard), put the test sample cells in the correct

heating block and close the protective cover. Push Start to start the

digestion program.

10 English

Andere Handbücher für LT 200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hach Laborausrüstung Handbücher

Hach

Hach Flow Cell FC 48/10 USC Bedienungsanleitung

Hach

Hach MET ONE 3400 Series Bedienungsanleitung

Hach

Hach Lange 2100AN Bedienungsanleitung

Hach

Hach TenSette plus Bedienungsanleitung

Hach

Hach sensION MM340 Bedienungsanleitung

Hach

Hach BODTrak II Kurzanleitung

Hach

Hach PHC201 Bedienungsanleitung

Hach

Hach Intellical MTC30101 Bedienungsanleitung

Hach

Hach TitraLab Bedienungsanleitung

Hach

Hach 2100Q Kurzanleitung

Hach

Hach BODTrak II Bedienungsanleitung

Hach

Hach DRB 200 Bedienungsanleitung

Hach

Hach Digesdahl 23130-20 Bedienungsanleitung

Hach

Hach ISENH4181 Bedienungsanleitung

Hach

Hach 2100N Kurzanleitung

Hach

Hach AS950 AWRS Bedienungsanleitung

Hach

Hach QbD1200 AutoSampler Bedienungsanleitung

Hach

Hach PHC301 Bedienungsanleitung

Hach

Hach Portable Spectrophotometer DR 2800 Bedienungsanleitung

Hach

Hach 900 MAX Bedienungsanleitung

Hach

Hach PHC729 Bedienungsanleitung

Hach

Hach ISECL181 Bedienungsanleitung

Hach

Hach TitraLab AT1000 Series Kurzanleitung

Hach

Hach BOD Direct plus Kurzanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung