Handicare SystemRoMedic RiseAtlas450M... Bedienungsanleitung

RiseAtlas450M with QuickTrolleySystem has been developed, for use in combination with the appropriate lifting acces-

sories, for transferring patients conveniently between two locations. The ceiling lift unit is installed on the appropriate rail

system to cover lifting needs in the given situation. The rail system may consist of a straight rail, with or without curves,

or a traverse system. It is also possible to transfer patients between two rooms using RiseAtlas. The QuickTrolley func-

tion facilitates mounting and dismounting of the lift unit on the rail.

Handicare’s SystemRoMedic product series includes a range of lifts, slings and other accessories. SystemRoMedic

adopts a holistic approach to patient transfers and is organized in four categories: transfer, positioning, support and

lifting.

Visual inspection

Inspect lift functions regularly. Check to ensure that product is free from damage.

Before use:

Ensure that the product is correctly assembled.

Check rail end stops.

Check slingbar connection and safety latch function.

Check lifting movement.

Always read the manuals for all assistive devices used during a transfer.

Keep the manual where it is accessible to users of the product.

The user/attendant shall be trained professional with thorough understanding of the equipment and lifting of disabled

persons.

Functional inspection

Always read the manual

Manual nr: 706-En Ver. 4 140820

Manual - English

SWL:

RiseAtlas450: 205 kg/450 lbs

RiseAtlas450M,

with QuickTrolleySystem

50100057 (RiseAtlas450M)

50100051 (RiseAtlas450M, high humidity)

SystemRoMedicTM

Table of contents

Installation...................................................................................3-12

- Unpacking and check............................................................................. 3

- Transport and storage ............................................................................ 3

- Installing the lift unit........................................................................... 3-6

- Charging the lift unit..........................................................................7-10

- Using QuickTrolleySystem .....................................................................11

- Different rail systems............................................................................12

- Final inspection....................................................................................12

Using the product ...................................................................13-18

- Important information ..........................................................................13

- Before use ...........................................................................................13

- Safe working load ................................................................................14

- Description of functions and symbols .....................................................14

- Hand control ........................................................................................15

- Information panel .................................................................................16

- Preventive service maintenance.............................................................16

- Emergency stop ...................................................................................17

- Electrical emergency lowering ...............................................................17

- Manual emergency lowering/raising.......................................................17

- Trouble-shooting ..................................................................................18

Accessories....................................................................................19

Maintenance ..................................................................................20

Technical information ..........................................................21-23

- Detailed description..............................................................................23

2MANUAL SystemRoMedicTM

Installation

Unpacking and check

With RiseAtlas, the following is included in the package:

1 RiseAtlas lift unit

1 Trolley

1 Hand control

2 Manuals - User manual, Assembly instructions for fuse

1 Charger station

1 Manual emergency lowering key

1 Safety pin H64

1 Safety pin H120 - 160

1 Label (QuickTrolleySystem)

1 Label (Parking for end point charging)

Check to ensure that no components are left in the packaging.

Inspect the lift unit for signs of damage.

Transport and storage

Before shipping, the fuse is removed to prevent battery discharge during transport or long-term storage.

Install the fuse in the lift unit according to the accompanying instructions.

Installing the lift unit

NOTE! The lift unit and carriage must be installed and inspected by authorized personnel according to instructions issued

by Handicare AB. Periodic inspection must be performed at least once yearly. Use only original spare parts. Service and

maintenance must be performed according to instructions in the manual.

The lift must be charged for at least 3 hours before it is used for the first time. The lift unit is shipped with the fuse

removed. Prior to installation the cover is removed and a 20A fuse is inserted. The fuse is packed in a bag. As standard,

the lift is factory pre-set for charging at a charger station. When installing the lift unit for in-rail charging on the rail system,

the system must be fitted with charger rails. Exercise caution when installing the lift unit, so that the charger wheels do

not come in contact with the rail, since this may cause short-circuiting. Incorrect installation may cause short-circuiting

and damage the charger.

Alteration of the charging method must be performed by authorized person-

nel according to instructions issued by Handicare AB.

MANUAL

SystemRoMedicTM

180 cm

Emergency Stop Strap

When the lift is correctly installed in the trolley system, the emergency

stop strap needs to be adjusted. The emergency stop strap is cut at a

height where the strap doesn´t interfere with a normal lifting situation but

at the same time is easily reached by all users.

The strap is cut with scissors and singed at the end as to prevent unravel.

Handicare recommends a height of 180 cm/70 inches above the floor.

Assembly of charger unit

The following is included in the charger station package:

• Holder

• Charger cup

Charger cable (EU, UK, US connectors included)

(fixtures between charger station and wall/freestanding rail not included)

Charger station

a) Secure holder to charger station on wall/freestanding rail system, fig 1. Recommended height is 110-120 cm from

floor.

b) Snap the cable connectors onto the lift unit’s charger cable, fig 2.

c) Mount the cable connectors with the charger cable on the underside of the charger cup, fig 3.

Use the accompanying screws.

d) Snap the charger cup in place in the holder for the charger station, fig 4.

e) Connect the accompanying hand control to the charger station and the hand control cable to the lift unit, Figure 5.

Check charger function.

1 2 34

4MANUAL SystemRoMedicTM

Clearence hole for safety pin

To be able to mount and dismount the lift unit from the rail with the QuickTrolleySystem, the saftey pin, marked red in

fig 1, needs a clearence hole in the rail that enables the saftey pin to slide up and down. Mounting and dismounting the

lift unit from the rail will only be possible at the position where the clearence hole has been made.

I. Decide where on the rail the lift unit can be mounted and dismounted. NOTE! Distance, D in fig 2, from end of rail to

trolley depends on which end stop that is used, Table 1.

II. Drill a hole, diameter 10-12 mm, in the rail where the safety pin should slide up and down, fig 3.

III. Remove metal chips from the rail.

VI. Put the accompanying label on the rail to show the user where the lift unit can be mounted and dismounted, fig 4.

Fig 1; Safety pin Fig 3; Trolley in rail

Trolley quick release

Trolley_new_design_2

WEIGHT: 3643.85

Material <not specified>

SHEET 1 OF 1

SCALE:1:10

DWG NO.

TITLE:

REVISION

DO NOT SCALE DRAWING

MATERIAL:

DATE

SIGNATURE

NAME

DEBUR AND

BREAK SHARP

EDGES

FINISH:

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

Q.A

MFG

APPV'D

CHK'D

DRAWN

Fig 2; Trolley in position for mount-

ing / dismounting

Trolley quick release

Trolley_new_design_2

WEIGHT: 3643.85

Material <not specified>

SHEET 1 OF 1

SCALE:1:5

DWG NO.

TITLE:

REVISION

DO NOT SCALE DRAWING

MATERIAL:

DATE

SIGNATURE

NAME

DEBUR AND

BREAK SHARP

EDGES

FINISH:

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

Q.A

MFG

APPV'D

CHK'D

DRAWN

Fig 4; Label on rail

Place the safety pin in the intended position in between the

charger plates, fig 1. The length of the safety pin chosen

depends on the height of the rail, Table 2.

Height of rail Safety pin

H64 Short safety pin

M3x15 mm

H120 – H160 Long safety pin

M3x25 mm

Table 2; Length of safety pin

End stop used Distance, D

Stop bult 50 mm

Adjustable end

stop

120 mm

Table 1; End stop

Skena med vagn

WEIGHT:

SHEET 1 OF 1

SCALE:1:10

DWG NO.

TITLE:

REVISION

DO NOT SCALE DRAWING

MATERIAL:

DATE

SIGNATURE

NAME

DEBUR AND

BREAK SHARP

EDGES

FINISH:

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

Q.A

MFG

APPV'D

CHK'D

DRAWN

Safety pin

Assembly of the trolley

MANUAL

SystemRoMedicTM

If the desired position for the lift unit is not parallell to the rail the quick trolley release bracket, marked red in fig 5, can be

adjusted by 45-degree angle intervals.

I. Open the cover by removing the two screws at the top. More detailed information can be find in the service

manual for RiseAtlas450.

II. Release the four screws that hold the top bracket in place. Rotate the quick trolley release bracket into the

desired angle, fig 6.

III. Mount the top bracket and the covers back to their original position.

CHASSIS ASSEMBLY MANUAL

90001449 CHASSIS ASSEMBLY MANUAL

WEIGHT:

SEE DETAILS

SHEET 1 OF 1

SCALE:1:10

DWG NO.

TITLE:

REVISION

DO NOT SCALE DRAWING

MATERIAL:

DATE

SIGNATURE

NAME

DEBUR AND

BREAK SHARP

EDGES

FINISH:

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

Q.A

MFG

APPV'D

CHK'D

DRAWN

CHASSIS ASSEMBLY MANUAL

90001449 CHASSIS ASSEMBLY MANUAL

WEIGHT:

SEE DETAILS

SHEET 1 OF 1

SCALE:1:10

DWG NO.

TITLE:

REVISION

DO NOT SCALE DRAWING

MATERIAL:

DATE

SIGNATURE

NAME

DEBUR AND

BREAK SHARP

EDGES

FINISH:

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

Q.A

MFG

APPV'D

CHK'D

DRAWN

Figure 5; Quick trolley release bracket

Figure 6; Adjusting the

QuickTrolleyReleaseBracket

6MANUAL SystemRoMedicTM

Charging the lift unit

RiseAtlas can be used with three different charging systems:

1. Charger station for charging via hand control (Standard version for 50100057)

2. In-rail charging (Accessory for 50100057)

3. End-point charging (Standard version for 50100051, accessory for 50100057)

RiseAtlas is charged with a charger unit that is connected to the charger cables via a DC outlet. The charger should be

kept in an appropriate location. Note that the charger is a separate unit and can be easily mistaken for another charger.

Ensure that the correct charger is used, see Technical information. For assembly instructions, see Assembly of charger

unit.

1) The lift unit is charged via a wall-mounted charger station. Place the hand

control in the charger station. The charging lamp on the lift unit indicates charging

for 15 minutes after being activated. Charging continues until the battery is fully

charged.

2) For in-rail charging, the lift unit is always kept charged, which means that it can

be left anywhere on the rail and will charge automatically.

3) For end-point charging, the lift unit is placed at the charger station at the end

of the rail. If the rail system is of the traverse type, the secondary rail is placed at

the end of the primary rail at which the charger station is located. Check to ensure

that the battery symbol on the lift unit lights up.

MANUAL

SystemRoMedicTM

Alternative 2: In-rail charging (Accessory for article number 50100057)

If the in-rail charging option is chosen, the lift unit must be fitted with a charger contact (70200062) and charger rails

before installation. The charger that is included with the lift unit is used. It is connected to the charger rails in the same

way as the charger station, see section Charger station for charging via hand control.

Alteration of the charging method must be performed by authorized

personnel according to instructions issued by Handicare AB.

1) Set the charging points for in-rail charging; the charger plate is not secured with the spring pins, see fig 1. To set the

charging points for in-rail charging, remove the spring pins that hold the charger plate in place. Then, the dip switch on

the circuit board is set for the desired charging function.

2) Check to ensure that the charger plate springs in and out when pressure is applied to the charger plate, see

fig 2.

3) Check to ensure that charger rails have been installed (installation of charger rails is described in the installation

manual for MilkyWay).

4) Guide the lift unit onto the rail so that the plus on the charging point is on the right side, according to fig 3.

5) Connect the red cable to the charger rail on the right side, the charger plate’s plus side (positive), and the black cable

on the left side (negative), according to fig 4.

6) Install the end-stop on the rail.

1 2

NOTE! No spring pin

+ Plus

8MANUAL SystemRoMedicTM

1 2

Alternative 3: End-point charging (Standard version for article number 50100051 and accessory for article number 50100057)

If the end-point charging option is chosen, the lift unit must be fitted with a charger contact (70200062). The charger

that is included with the lift unit is used. It is connected to the charger rails in the same way as the charger station, see

section Charger station for charging via hand control.

1) Check to ensure that the charging points are set for the charger station; the charger plate is secured with the spring

pins, see fig 1.

2) Check to ensure that the charger plate springs in and out when pressure is applied to the charger plate, see fig 2.

3) Guide the lift unit onto the rail so that the plus on the charging point is on the right side, according to fig 3.

4) Mount charger contacts according to fig 4. NOTE! Push the charger contact (A) in about 50 mm if only a stop bolt is

used. When an adjustable end-stop is used, the charger contact is pushed in about 90 mm.

5) Affix the accompanying screws for charger contacts, see fig 5 (B).

6) Connect the red cable to the charger contact on the right side, the charger plate’s plus side (positive), and the black

cable on the left side (negative), according to fig 6.

7) Install the end-stop on the rail.

Spring pin

+ Plus

SCALE:1:5

DWG. NO.

REV.

NAME

DATE

DRAWN

APPROVED BY

SHEET 1 OF 1

WEIGHT:

COMMENTS:

STATUS:

TITLE

MATERIAL:

SIZE

hc-mabr

In work

End point charger

90001915

00A

Material <not specified>

3441.59 g

2012-01-12

Unless otherwise stated, general

tolerances according to ISO 2768-m

This drawing and any information or descriptive matter set out hereon are the confidential and copyright property of Handicare

and must not be disclosed, loaned, copied or used for manufacturing, tendering or any other purpose without their written permission.

SCALE:1:5

DWG. NO.

REV.

NAME

DATE

DRAWN

APPROVED BY

SHEET 1 OF 1

WEIGHT:

COMMENTS:

STATUS:

TITLE

MATERIAL:

SIZE

hc-mabr

In work

End point charger

90001915

00A

Material <not specified>

3441.59 g

2012-01-12

Unless otherwise stated, general

tolerances according to ISO 2768-m

This drawing and any information or descriptive matter set out hereon are the confidential and copyright property of Handicare

and must not be disclosed, loaned, copied or used for manufacturing, tendering or any other purpose without their written permission.

MANUAL

SystemRoMedicTM

Battery status, charger station

The battery symbol lights green when battery capacity exceeds 50%.

If the battery symbol blinks orange when the lift is started, the battery needs to be charged.

If the battery symbol lights orange and a beep is heard when the lift is run up, the battery needs

to be charged immediately.

When the lift unit is placed in the charging position the battery symbol lights green for 15 minutes.

The freestanding charger unit also indicates charging status via a coloured lamp. When the lift

unit is fully charged the charger unit lamp lights green.

When the lift unit is activated the battery symbol lights up for two seconds to indicate the current

battery status.

Battery status, in-rail charging

The battery symbol lights green when battery capacity exceeds 50%.

When the lift unit is activated the battery symbol lights green for 15 min.

If the battery symbol and the book symbol blink orange when the lift unit is started, the circuit for

the charging system has been broken and must be checked by a technician.

NOTE!

Use only the charger that is intended for the lift unit.

For maximum service life, charge batteries regularly. Do not allow the battery charge level to fall

below 25% (orange symbol on control panel).

Emergency stop must not be activated during charging.

Batteries may only be replaced by authorized personnel.

10 MANUAL SystemRoMedicTM

Inhaltsverzeichnis

Andere Handicare Medizinische Geräte Handbücher

Handicare

Handicare 201120040 Bedienungsanleitung

Handicare

Handicare Eva400 Bedienungsanleitung

Handicare

Handicare SystemRoMedic TurnSafe2 Bedienungsanleitung

Handicare

Handicare Simplicity Series Bedienungsanleitung

Handicare

Handicare Eva400 Bedienungsanleitung

Handicare

Handicare SystemRoMedic SupportStraps Bedienungsanleitung

Handicare

Handicare LI2513 Bedienungsanleitung

Handicare

Handicare MilkyWay SystemRoMedic Bedienungsanleitung

Handicare

Handicare 201903314 Bedienungsanleitung

Handicare

Handicare Micro Pilot Joystick Bedienungsanleitung

Handicare

Handicare LI2613.000 Series Bedienungsanleitung

Handicare

Handicare LI2634.000 Series Bedienungsanleitung

Handicare

Handicare 3309320 Bedienungsanleitung

Handicare

Handicare SystemRoMedic EasyGlide Series Bedienungsanleitung

Handicare

Handicare SystemRoMedic Vega505EE Bedienungsanleitung

Handicare

Handicare LI2590.125 Series Bedienungsanleitung

Handicare

Handicare AP-450 Bedienungsanleitung

Handicare

Handicare SystemRoMedic Vega505EE Bedienungsanleitung

Handicare

Handicare System RoMedic PositioningCover Bedienungsanleitung

Handicare

Handicare SystemRoMedic EvaDrive Bedienungsanleitung

Handicare

Handicare LinidoSolutions LI2618.0006-12 Bedienungsanleitung

Handicare

Handicare LI2606.000 Series Bedienungsanleitung

Handicare

Handicare SystemRoMedic RiseAtlas450 Bedienungsanleitung

Handicare

Handicare SystemRoMedic ReTurn7500 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung